[PATCH v2 0/5] fbdev/ssd1307fb: Some changes and improvement

Changes since first version:
- Cherry-picked "fbdev/ssd1307fb: add support to enable VBAT" again
  beacuse of weird mixup in the first version
- Also tested the code on top of v4.10-rc3 with am335x-icev2 evm

We needed these changes for couple of our evm. Some of these patches
have been on mainline list before, but after that forgotten. Now we
are forward porting these on for out internal release, so this is a
good time to get them to mainline too.

Everything else is quite straight forward, but removing the
reset-active-low dts property is a questionable at least in
theory. However, in practice if anyone was using the property in their
device-tree blobs, they have never been able to get desired effect
with mainline kernel.

Jyri Sarha (3):
  fbdev: ssd1307fb: Start to use gpiod API for reset gpio
  fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
  fbdev: ssd1307fb: Make reset gpio devicetree property optional

Tomi Valkeinen (2):
  fbdev/ssd1307fb: add support to enable VBAT
  fbdev/ssd1307fb: clear screen in probe

 .../devicetree/bindings/display/ssd1307fb.txt      |  5 +-
 drivers/video/fbdev/ssd1307fb.c                    | 55 ++++++++++++++--------
 2 files changed, 38 insertions(+), 22 deletions(-)

-- 
1.9.1