# Re: \[PATCH v3 01/14\] Documentation: dt/bindings: Document pinctrl-ingenic

- From: Paul Cercueil \<paul@crapouillou.net\>
- Date: 2017-01-31 10:32:30 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2017/01/4924147
- Thread: https://ratatoskr.run/linux-gpio/2017/01/4914584/t.md

```text
Hi,

> From the overlapping register addresses in the examples and this
> description, it looks like the pinctrlr and gpio controller are 1 
> block.
> If so, then there should only be 1 node.

Well, that's what I had until Linus W. just told me to do the opposite:

> Just pull all these down two levels and make them one device
> each instead of having them inside the pin controller node
> like this.

-Paul
```