[PATCH 1/3] video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver
From: Alexander Shiyan <hidden>
Date: 2014-03-20 16:24:34
Subsystem:
framebuffer layer, the rest · Maintainers:
Helge Deller, Linus Torvalds
This adds support for the framebuffer available in the Cirrus Logic CLPS711X CPUs. The driver have been tested with custom board equipped Cirrus Logic EP7312 in DT and non-DT mode. Signed-off-by: Alexander Shiyan <redacted> --- drivers/video/fbdev/clps711x-fb.c | 456 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 456 insertions(+) create mode 100644 drivers/video/fbdev/clps711x-fb.c
diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c
new file mode 100644
index 0000000..87fd42d
--- /dev/null
+++ b/drivers/video/fbdev/clps711x-fb.c@@ -0,0 +1,456 @@ +/* + * Cirrus Logic CLPS711X FB driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * Based on driver by Russell King <rmk@arm.linux.org.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> +#include <linux/regulator/consumer.h> +#include <video/of_display_timing.h> + +#define CLPS711X_FB_NAME "clps711x-fb" +#define CLPS711X_FB_BPP_MAX (4) + +/* Registers relative to LCDCON */ +#define CLPS711X_LCDCON (0x0000) +# define LCDCON_GSEN BIT(30) +# define LCDCON_GSMD BIT(31) +#define CLPS711X_PALLSW (0x0280) +#define CLPS711X_PALMSW (0x02c0) +#define CLPS711X_FBADDR (0x0d40) + +struct clps711x_fb_info { + struct clk *clk; + void __iomem *base; + struct regmap *syscon; + resource_size_t buffsize; + struct fb_videomode mode; + struct regulator *lcd_pwr; + u32 ac_prescale; + bool cmap_invert; +}; + +static int clps711x_fb_setcolreg(u_int regno, u_int red, u_int green, + u_int blue, u_int transp, struct fb_info *info) +{ + struct clps711x_fb_info *cfb = info->par; + u32 level, mask, shift; + + if (regno >= BIT(info->var.bits_per_pixel)) + return -EINVAL; + + shift = 4 * (regno & 7); + mask = 0xf << shift; + /* gray = 0.30*R + 0.58*G + 0.11*B */ + level = (((red * 77 + green * 151 + blue * 28) >> 20) << shift) & mask; + if (cfb->cmap_invert) + level = 0xf - level; + + regno = (regno < 8) ? CLPS711X_PALLSW : CLPS711X_PALMSW; + + writel((readl(cfb->base + regno) & ~mask) | level, cfb->base + regno); + + return 0; +} + +static int clps711x_fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + u32 val; + + if (var->bits_per_pixel < 1 || + var->bits_per_pixel > CLPS711X_FB_BPP_MAX) + return -EINVAL; + + if (!var->pixclock) + return -EINVAL; + + val = DIV_ROUND_UP(var->xres, 16) - 1; + if (val < 0x01 || val > 0x3f) + return -EINVAL; + + val = DIV_ROUND_UP(var->yres * var->xres * var->bits_per_pixel, 128); + val--; + if (val < 0x001 || val > 0x1fff) + return -EINVAL; + + var->transp.msb_right = 0; + var->transp.offset = 0; + var->transp.length = 0; + var->red.msb_right = 0; + var->red.offset = 0; + var->red.length = var->bits_per_pixel; + var->green = var->red; + var->blue = var->red; + var->grayscale = var->bits_per_pixel > 1; + + return 0; +} + +static int clps711x_fb_set_par(struct fb_info *info) +{ + struct clps711x_fb_info *cfb = info->par; + resource_size_t size; + u32 lcdcon, pps; + + size = (info->var.xres * info->var.yres * info->var.bits_per_pixel) / 8; + if (size > cfb->buffsize) + return -EINVAL; + + switch (info->var.bits_per_pixel) { + case 1: + info->fix.visual = FB_VISUAL_MONO01; + break; + case 2: + case 4: + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + default: + return -EINVAL; + } + + info->fix.line_length = info->var.xres * info->var.bits_per_pixel / 8; + info->fix.smem_len = size; + + lcdcon = (info->var.xres * info->var.yres * + info->var.bits_per_pixel) / 128 - 1; + lcdcon |= ((info->var.xres / 16) - 1) << 13; + lcdcon |= (cfb->ac_prescale & 0x1f) << 25; + + pps = clk_get_rate(cfb->clk) / (PICOS2KHZ(info->var.pixclock) * 1000); + if (pps) + pps--; + lcdcon |= (pps & 0x3f) << 19; + + if (info->var.bits_per_pixel = 4) + lcdcon |= LCDCON_GSMD; + if (info->var.bits_per_pixel >= 2) + lcdcon |= LCDCON_GSEN; + + /* LCDCON must only be changed while the LCD is disabled */ + regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); + writel(lcdcon, cfb->base + CLPS711X_LCDCON); + regmap_update_bits(cfb->syscon, SYSCON_OFFSET, + SYSCON1_LCDEN, SYSCON1_LCDEN); + + return 0; +} + +static int clps711x_fb_blank(int blank, struct fb_info *info) +{ + /* Return happy */ + return 0; +} + +static struct fb_ops clps711x_fb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = clps711x_fb_setcolreg, + .fb_check_var = clps711x_fb_check_var, + .fb_set_par = clps711x_fb_set_par, + .fb_blank = clps711x_fb_blank, + .fb_fillrect = sys_fillrect, + .fb_copyarea = sys_copyarea, + .fb_imageblit = sys_imageblit, +}; + +static int clps711x_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi) +{ + struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); + + return (!fi || fi->par = cfb) ? 1 : 0; +} + +static int clps711x_lcd_get_power(struct lcd_device *lcddev) +{ + struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); + + if (!IS_ERR_OR_NULL(cfb->lcd_pwr)) + return regulator_is_enabled(cfb->lcd_pwr); + + return 1; +} + +static int clps711x_lcd_set_power(struct lcd_device *lcddev, int power) +{ + struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); + + if (!IS_ERR_OR_NULL(cfb->lcd_pwr)) { + if (power) + return regulator_enable(cfb->lcd_pwr); + else + return regulator_disable(cfb->lcd_pwr); + } + + return 0; +} + +static struct lcd_ops clps711x_lcd_ops = { + .check_fb = clps711x_lcd_check_fb, + .get_power = clps711x_lcd_get_power, + .set_power = clps711x_lcd_set_power, +}; + +static int clps711x_fb_get_mode(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + bool *pinvert = dev_get_platdata(&pdev->dev); + struct clps711x_fb_info *cfb = info->par; + unsigned long pixclk; + unsigned int val; + int ret; + + cfb->syscon = syscon_regmap_lookup_by_pdevname("syscon.1"); + if (IS_ERR(cfb->syscon)) + return PTR_ERR(cfb->syscon); + + ret = regmap_read(cfb->syscon, SYSCON_OFFSET, &val); + if (ret) + return ret; + + if (pinvert) + cfb->cmap_invert = *pinvert; + + /* Get mode from LCD if active */ + if (val & SYSCON1_LCDEN) { + val = readl(cfb->base + CLPS711X_LCDCON); + + switch (val & (LCDCON_GSMD | LCDCON_GSEN)) { + case LCDCON_GSMD | LCDCON_GSEN: + info->var.bits_per_pixel = 4; + break; + case LCDCON_GSEN: + info->var.bits_per_pixel = 2; + break; + default: + info->var.bits_per_pixel = 1; + break; + } + + cfb->mode.xres = (((val >> 13) & 0x3f) + 1) * 16; + cfb->mode.yres = (((val & 0x1fff) + 1) * 128) / + (cfb->mode.xres * info->var.bits_per_pixel); + cfb->ac_prescale = (val >> 25) & 0x1f; + pixclk = clk_get_rate(cfb->clk) / (((val >> 19) & 0x3f) + 1); + } else { + /* Fixed setup for existing users */ + info->var.bits_per_pixel = 4; + cfb->mode.xres = 640; + cfb->mode.yres = 240; + cfb->ac_prescale = 13; + pixclk = 10000000; + } + + cfb->mode.refresh = pixclk / (cfb->mode.xres * cfb->mode.yres); + cfb->mode.pixclock = KHZ2PICOS(pixclk / 1000); + + return 0; +} + +static int clps711x_fb_get_mode_dt(struct platform_device *pdev) +{ + struct device_node *disp, *np = pdev->dev.of_node; + struct fb_info *info = platform_get_drvdata(pdev); + struct clps711x_fb_info *cfb = info->par; + int ret; + + cfb->syscon + syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1"); + if (IS_ERR(cfb->syscon)) + return PTR_ERR(cfb->syscon); + + disp = of_parse_phandle(np, "display", 0); + if (!disp) { + dev_err(&pdev->dev, "No display defined\n"); + return -ENODATA; + } + + ret = of_get_fb_videomode(disp, &cfb->mode, OF_USE_NATIVE_MODE); + if (ret) + return ret; + + of_property_read_u32(disp, "ac-prescale", &cfb->ac_prescale); + cfb->cmap_invert = of_property_read_bool(disp, "cmap-invert"); + + return of_property_read_u32(disp, "bits-per-pixel", + &info->var.bits_per_pixel); +} + +static int clps711x_fb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct clps711x_fb_info *cfb; + struct lcd_device *lcd; + struct fb_info *info; + struct resource *res; + int ret = -ENOENT; + u32 val; + + if (fb_get_options(CLPS711X_FB_NAME, NULL)) + return -ENODEV; + + info = framebuffer_alloc(sizeof(*cfb), dev); + if (!info) + return -ENOMEM; + + cfb = info->par; + platform_set_drvdata(pdev, info); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto out_fb_release; + cfb->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!cfb->base) { + ret = -ENOMEM; + goto out_fb_release; + } + + info->fix.mmio_start = res->start; + info->fix.mmio_len = resource_size(res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + info->screen_base = devm_ioremap_resource(dev, res); + if (IS_ERR(info->screen_base)) { + ret = PTR_ERR(info->screen_base); + goto out_fb_release; + } + + /* Physical address should be aligned to 256 MiB */ + if (res->start & 0x0fffffff) { + ret = -EINVAL; + goto out_fb_release; + } + + info->apertures = alloc_apertures(1); + if (!info->apertures) { + ret = -ENOMEM; + goto out_fb_release; + } + + cfb->buffsize = resource_size(res); + info->fix.smem_start = res->start; + info->apertures->ranges[0].base = info->fix.smem_start; + info->apertures->ranges[0].size = cfb->buffsize; + + cfb->clk = devm_clk_get(dev, NULL); + if (IS_ERR(cfb->clk)) { + ret = PTR_ERR(cfb->clk); + goto out_fb_release; + } + + ret = np ? clps711x_fb_get_mode_dt(pdev) : clps711x_fb_get_mode(pdev); + if (ret) + goto out_fb_release; + + /* Force disable LCD on any mismatch */ + if (info->fix.smem_start != (readb(cfb->base + CLPS711X_FBADDR) << 28)) + regmap_update_bits(cfb->syscon, SYSCON_OFFSET, + SYSCON1_LCDEN, 0); + + ret = regmap_read(cfb->syscon, SYSCON_OFFSET, &val); + if (ret) + goto out_fb_release; + + if (!(val & SYSCON1_LCDEN)) { + /* Setup start FB address */ + writeb(info->fix.smem_start >> 28, cfb->base + CLPS711X_FBADDR); + /* Clean FB memory */ + memset(info->screen_base, 0, cfb->buffsize); + } + + cfb->lcd_pwr = devm_regulator_get(dev, "lcd"); + if (PTR_ERR(cfb->lcd_pwr) = -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_fb_release; + } + + info->fbops = &clps711x_fb_ops; + info->flags = FBINFO_DEFAULT; + info->var.activate = FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; + info->var.height = -1; + info->var.width = -1; + info->var.vmode = FB_VMODE_NONINTERLACED; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.accel = FB_ACCEL_NONE; + strlcpy(info->fix.id, CLPS711X_FB_NAME, sizeof(info->fix.id)); + fb_videomode_to_var(&info->var, &cfb->mode); + + ret = fb_alloc_cmap(&info->cmap, BIT(CLPS711X_FB_BPP_MAX), 0); + if (ret) + goto out_fb_release; + + ret = fb_set_var(info, &info->var); + if (ret) + goto out_fb_dealloc_cmap; + + ret = register_framebuffer(info); + if (ret) + goto out_fb_dealloc_cmap; + + lcd = devm_lcd_device_register(dev, "clps711x-lcd", dev, cfb, + &clps711x_lcd_ops); + if (!IS_ERR(lcd)) + return 0; + + ret = PTR_ERR(lcd); + unregister_framebuffer(info); + +out_fb_dealloc_cmap: + regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); + fb_dealloc_cmap(&info->cmap); + +out_fb_release: + framebuffer_release(info); + + return ret; +} + +static int clps711x_fb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct clps711x_fb_info *cfb = info->par; + + regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + + return 0; +} + +static const struct of_device_id __maybe_unused clps711x_fb_dt_ids[] = { + { .compatible = "cirrus,clps711x-fb", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_fb_dt_ids); + +static struct platform_driver clps711x_fb_driver = { + .driver = { + .name = CLPS711X_FB_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(clps711x_fb_dt_ids), + }, + .probe = clps711x_fb_probe, + .remove = clps711x_fb_remove, +}; +module_platform_driver(clps711x_fb_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("Cirrus Logic CLPS711X FB driver"); +MODULE_LICENSE("GPL");
--
1.8.3.2