[PATCH v2] ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance

Subsystems: framebuffer layer, the rest

STALE4719d

2 messages, 2 authors, 2013-11-18 · open the first message on its own page

[PATCH v2] ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance

From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: 2013-11-11 18:41:38

When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:

[    7.302154] ==================[    7.307128] [ BUG: bad unlock balance detected! ]
[    7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted
[    7.318450] -------------------------------------
[    7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at:
[    7.330657] [<c031b760>] acx565akm_enable+0x12c/0x18c
[    7.335998] but there are no more locks to release!

Fix by removing double unlock and handling the locking completely inside
acx565akm_panel_power_on() when doing the power on.

Reported-by: Eduardo Valentin <redacted>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
---
 drivers/video/omap2/displays-new/panel-sony-acx565akm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
index e6d56f7..d94f35d 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
@@ -526,6 +526,8 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	struct omap_dss_device *in = ddata->in;
 	int r;
 
+	mutex_lock(&ddata->mutex);
+
 	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 
 	in->ops.sdi->set_timings(in, &ddata->videomode);
@@ -614,10 +616,7 @@ static int acx565akm_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	mutex_lock(&ddata->mutex);
 	r = acx565akm_panel_power_on(dssdev);
-	mutex_unlock(&ddata->mutex);
-
 	if (r)
 		return r;
 
-- 
1.8.4.2

Re: [PATCH v2] ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance

From: Tomi Valkeinen <hidden>
Date: 2013-11-18 13:36:51

On 2013-11-11 20:41, Aaro Koskinen wrote:
quoted hunk
When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:

[    7.302154] =====================================
[    7.307128] [ BUG: bad unlock balance detected! ]
[    7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted
[    7.318450] -------------------------------------
[    7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at:
[    7.330657] [<c031b760>] acx565akm_enable+0x12c/0x18c
[    7.335998] but there are no more locks to release!

Fix by removing double unlock and handling the locking completely inside
acx565akm_panel_power_on() when doing the power on.

Reported-by: Eduardo Valentin <redacted>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
---
 drivers/video/omap2/displays-new/panel-sony-acx565akm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
index e6d56f7..d94f35d 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
@@ -526,6 +526,8 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	struct omap_dss_device *in = ddata->in;
 	int r;
 
+	mutex_lock(&ddata->mutex);
+
 	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 
 	in->ops.sdi->set_timings(in, &ddata->videomode);
@@ -614,10 +616,7 @@ static int acx565akm_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	mutex_lock(&ddata->mutex);
 	r = acx565akm_panel_power_on(dssdev);
-	mutex_unlock(&ddata->mutex);
-
 	if (r)
 		return r;
 
Thanks, this is better. lock and unlock in different functions makes me
feel very uneasy...

 Tomi

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help