# Re: \[PATCH\] powerpc: remove PReP

- From: Geert Uytterhoeven \<geert@linux-m68k.org\>
- Date: 2013-03-27 12:05:27 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2013/03/4024602
- Thread: https://ratatoskr.run/linuxppc-dev/2013/03/4020844/t.md

```text
On Wed, Mar 27, 2013 at 11:47 AM, Paul Bolle [ref] wrote:
> 3) I removed two files in documentation that are almost entirely PReP
> specific. The remaining lines looked uninteresting.

> --- a/Documentation/powerpc/sound.txt
> +++ /dev/null

> -2. IBM CHRP
> -
> -  I have only tested this on the 43P-150.  Build the kernel with the cs4232
> -  set as a module and load the module with irq=9 dma=1 dma2=2 io=0x550

This section is CHRP-specific. The cs4232 driver also worked on the
CHRP LongTrail.
But I don't remember if the parameter values above also applied to LongTrail.
I do remember it didn't work without specifing the right parameters, so you
probably want to keep this section.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
```
