[PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

STALE5271d

Revision resend of 2 in this series.

5 messages, 2 authors, 2012-05-07 · open the first message on its own page

[PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

From: Shawn Guo <hidden>
Date: 2012-05-07 01:16:05 

[Resend to have subsystem lists Cc-ed]

With pinctrl-mxs driver (DT only) applied on pinctrl tree, the mxs
device tree conversion can start basing on that support.  This series
adopts pinctrl support for mxs device drivers with a dummy pinctrl
state provided for non-DT boot, so that the pinctrl call in the device
drivers will be bypassed for non-DT probe while it starts working for
DT probe.

To ease the merge process, I would like to ask Arnd and Olof to pull
pinctrl tree as a dependency in arm-soc and have this series go through
arm-soc.

Regards,
Shawn

Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  video: mxsfb: adopt pinctrl support
  ARM: mxs: enable pinctrl support

 arch/arm/Kconfig                        |    1 +
 arch/arm/mach-mxs/Kconfig               |    2 ++
 arch/arm/mach-mxs/include/mach/common.h |    2 ++
 arch/arm/mach-mxs/mach-apx4devkit.c     |    2 ++
 arch/arm/mach-mxs/mach-m28evk.c         |    2 ++
 arch/arm/mach-mxs/mach-mx23evk.c        |    2 ++
 arch/arm/mach-mxs/mach-mx28evk.c        |    2 ++
 arch/arm/mach-mxs/mach-stmp378x_devb.c  |    2 ++
 arch/arm/mach-mxs/mach-tx28.c           |    2 ++
 arch/arm/mach-mxs/mm.c                  |   11 +++++++++++
 drivers/i2c/busses/i2c-mxs.c            |    6 ++++++
 drivers/mmc/host/mxs-mmc.c              |    8 ++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c  |    9 +++++++++
 drivers/tty/serial/amba-pl011.c         |    8 ++++++++
 drivers/tty/serial/mxs-auart.c          |    8 ++++++++
 drivers/video/mxsfb.c                   |    9 +++++++++
 sound/soc/mxs/mxs-saif.c                |    8 ++++++++
 17 files changed, 84 insertions(+), 0 deletions(-)

-- 
1.7.5.4

[PATCH RESEND 8/9] video: mxsfb: adopt pinctrl support

From: Shawn Guo <hidden>
Date: 2012-05-07 01:16:13 

Cc: linux-fbdev@vger.kernel.org
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Shawn Guo <redacted>
---
 drivers/video/mxsfb.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 4a89f88..6c6bc57 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -45,6 +45,7 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
+#include <linux/pinctrl/consumer.h>
 #include <mach/mxsfb.h>
 
 #define REG_SET	4
@@ -756,6 +757,7 @@ static int __devinit mxsfb_probe(struct platform_device *pdev)
 	struct mxsfb_info *host;
 	struct fb_info *fb_info;
 	struct fb_modelist *modelist;
+	struct pinctrl *pinctrl;
 	int i, ret;
 
 	if (!pdata) {
@@ -793,6 +795,12 @@ static int __devinit mxsfb_probe(struct platform_device *pdev)
 
 	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
+		goto error_getpin;
+	}
+
 	host->clk = clk_get(&host->pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
@@ -848,6 +856,7 @@ error_init_fb:
 error_pseudo_pallette:
 	clk_put(host->clk);
 error_getclock:
+error_getpin:
 	iounmap(host->base);
 error_ioremap:
 	framebuffer_release(fb_info);
-- 
1.7.5.4

[alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

From: Dong Aisheng <hidden>
Date: 2012-05-07 07:14:00 

On Mon, May 07, 2012 at 09:16:05AM +0800, Shawn Guo wrote:
[Resend to have subsystem lists Cc-ed]

With pinctrl-mxs driver (DT only) applied on pinctrl tree, the mxs
device tree conversion can start basing on that support.  This series
adopts pinctrl support for mxs device drivers with a dummy pinctrl
state provided for non-DT boot, so that the pinctrl call in the device
drivers will be bypassed for non-DT probe while it starts working for
DT probe.

To ease the merge process, I would like to ask Arnd and Olof to pull
pinctrl tree as a dependency in arm-soc and have this series go through
arm-soc.
As IMX, basically i'd prefer to add pinctrl states in dts file at the
same time within the patch or using a separate patch to add them before
this series to avoid breaking the exist platforms.

However i noted that for mxs, most drivers here are still not dt capable,
so it may be ok to not add their pinctrl state at this time.

But for the patch "serial: amba-pl011: adopt pinctrl support" since it is
dt capable, so with this patch applied, the mx28 dt boot will fail.
Maybe we should at least add pinctrl states for amba-pl011 first.

Regards,
Shawn

Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
BTW, will this one break other platforms using this driver?

  serial: mxs-auart: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  video: mxsfb: adopt pinctrl support
  ARM: mxs: enable pinctrl support

 arch/arm/Kconfig                        |    1 +
 arch/arm/mach-mxs/Kconfig               |    2 ++
 arch/arm/mach-mxs/include/mach/common.h |    2 ++
 arch/arm/mach-mxs/mach-apx4devkit.c     |    2 ++
 arch/arm/mach-mxs/mach-m28evk.c         |    2 ++
 arch/arm/mach-mxs/mach-mx23evk.c        |    2 ++
 arch/arm/mach-mxs/mach-mx28evk.c        |    2 ++
 arch/arm/mach-mxs/mach-stmp378x_devb.c  |    2 ++
 arch/arm/mach-mxs/mach-tx28.c           |    2 ++
 arch/arm/mach-mxs/mm.c                  |   11 +++++++++++
 drivers/i2c/busses/i2c-mxs.c            |    6 ++++++
 drivers/mmc/host/mxs-mmc.c              |    8 ++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c  |    9 +++++++++
 drivers/tty/serial/amba-pl011.c         |    8 ++++++++
 drivers/tty/serial/mxs-auart.c          |    8 ++++++++
 drivers/video/mxsfb.c                   |    9 +++++++++
 sound/soc/mxs/mxs-saif.c                |    8 ++++++++
 17 files changed, 84 insertions(+), 0 deletions(-)

-- 
1.7.5.4
Regards
Dong Aisheng

[alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

From: Shawn Guo <hidden>
Date: 2012-05-07 07:47:00 

On Mon, May 07, 2012 at 03:14:00PM +0800, Dong Aisheng wrote:
As IMX, basically i'd prefer to add pinctrl states in dts file at the
same time within the patch or using a separate patch to add them before
this series to avoid breaking the exist platforms.

However i noted that for mxs, most drivers here are still not dt capable,
so it may be ok to not add their pinctrl state at this time.
There no mxs driver on mainline that has been DT aware of.  What I'm
going to do is to ask Arnd abandon the mxs/dt branch I sent him before
and send him an updated one with the whole mxs DT support based on
mxs common clk and pinctrl series.

But for the patch "serial: amba-pl011: adopt pinctrl support" since it is
dt capable, so with this patch applied, the mx28 dt boot will fail.
Maybe we should at least add pinctrl states for amba-pl011 first.
The updated mxs/dt will have pinctrl defined in dts for each device
that is converted to DT.
quoted
Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
BTW, will this one break other platforms using this driver?
If the platforms do not turn on CONFIG_PINCTRL, they are fine.  If they
turn on the support, they should provide pinctrl state either dummy or
real one.

-- 
Regards,
Shawn

[alsa-devel] [PATCH RESEND 0/9] Enable pinctrl support for mach-mxs

From: Dong Aisheng <hidden>
Date: 2012-05-07 08:01:32 

On Mon, May 07, 2012 at 03:47:00PM +0800, Shawn Guo wrote:
On Mon, May 07, 2012 at 03:14:00PM +0800, Dong Aisheng wrote:
quoted
As IMX, basically i'd prefer to add pinctrl states in dts file at the
same time within the patch or using a separate patch to add them before
this series to avoid breaking the exist platforms.

However i noted that for mxs, most drivers here are still not dt capable,
so it may be ok to not add their pinctrl state at this time.
There no mxs driver on mainline that has been DT aware of.  What I'm
going to do is to ask Arnd abandon the mxs/dt branch I sent him before
and send him an updated one with the whole mxs DT support based on
mxs common clk and pinctrl series.
quoted
But for the patch "serial: amba-pl011: adopt pinctrl support" since it is
dt capable, so with this patch applied, the mx28 dt boot will fail.
Maybe we should at least add pinctrl states for amba-pl011 first.
The updated mxs/dt will have pinctrl defined in dts for each device
that is converted to DT.
Well, i did not see amba-pl011 pinctrl states defined in this patch.
But it would be ok if you can get it done and applied before this patch.
quoted
quoted
Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
BTW, will this one break other platforms using this driver?
If the platforms do not turn on CONFIG_PINCTRL, they are fine.  If they
turn on the support, they should provide pinctrl state either dummy or
real one.
Regards
Dong Aisheng
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help