# \[PATCH 3/7\] OMAPDSS: remove wrong HDMI HPD muxing - From: Tomi Valkeinen \ - Date: 2012-03-01 12:26:31 - List: linux-fbdev - Page: https://ratatoskr.run/linux-fbdev/2012/03/13462963 - Thread: https://ratatoskr.run/linux-fbdev/2012/03/13462814/t.md ```text "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Backported from 7bb122d155f742fe2d79849090c825be7b4a247e Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ---- arch/arm/mach-omap2/board-omap4panda.c | 4 ---- 2 files changed, 0 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4333115..385c1fd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -597,12 +597,8 @@ static void __init omap_sfh7741prox_init(void) static void sdp4430_hdmi_mux_init(void) { - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8e20f1..e0d0abc 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -481,12 +481,8 @@ int __init omap4_panda_dvi_init(void) static void omap4_panda_hdmi_mux_init(void) { - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", -- 1.7.4.1 ```