# \[PATCH v6\] OMAP2/3/4: DSS2: Enable Display SubSystem as modules - Subsystems: ARM PORT, OMAP2+ SUPPORT, THE REST - Maintainers: Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds - List: linux-fbdev - 3 messages, 3 authors - Page: https://ratatoskr.run/linux-fbdev/2011/02/8569751/t ## \[PATCH v6\] OMAP2/3/4: DSS2: Enable Display SubSystem as modules - From: Samreen \ - Date: 2011-02-24 06:26:40 - Message: https://ratatoskr.run/linux-fbdev/2011/02/8569751.md ```text Enabling all the display interface options to be built as module And enabling all the display panels to be built as modules. Signed-off-by: Samreen --- Version6: Enabling all the display interface options and all the display panels. Version5: Incorporating the comments from Tony Lindgren, Kevin Hilman, Paul Mundt & Tomi Valkeinen to build DSS & panels as modules. See: https://patchwork.kernel.org/patch/281492/ Version4: Remove the enabling of the display panels by default. Version3: Eliminate the separate default number of FBs for different architecture. Keeping default FBs as 3 as before. Version2: Enables by default NEC panel used in zoom2/3/3630sdp, instead of Sharp LQ043T1DG01 panel enabled in previous version of this patch. Testing: --------- The base used for OMAP3 testing is: branch: master commit: bb95b65a URL: git://gitorious.org/linux-omap-dss2/linux.git And OMAP4 testing is on the following branch + few patches to enable DSI taal panel: branch: lo-dss2-Feb18 commit: 67bcb5600 URL: git://dev.omapzoom.org/pub/scm/axelcx/kernel-display.git The patch is tested on 3630zoom, 3430sdp & 4430sdp, it was not tested on OMAP2 platform due crash seen while boot. (See: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg43921.html) arch/arm/configs/omap2plus_defconfig | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ae890ca..407ccf8 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -192,6 +192,17 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_OMAP_LCD_VGA=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_SHARP_LS037V7DW01=m +CONFIG_PANEL_NEC_NL8048HL11_01B=m +CONFIG_PANEL_TAAL=m +CONFIG_PANEL_TPO_TD043MTEA1=m +CONFIG_PANEL_ACX565AKM=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y -- 1.5.6.3 ``` ## \[PATCH v6\] OMAP2/3/4: DSS2: Enable Display SubSystem as modules - From: Tomi Valkeinen \ - Date: 2011-02-24 08:31:52 - Message: https://ratatoskr.run/linux-fbdev/2011/02/8569758.md ```text On Thu, 2011-02-24 at 00:26 -0600, Nilofer, Samreen wrote: > Enabling all the display interface options to be built as module > And enabling all the display panels to be built as modules. > > Signed-off-by: Samreen This looks good to me. Tony, want to ack this? This enables all DSS features as modules. This should go through dss tree, as this doesn't work without a fix that is there. Tomi > arch/arm/configs/omap2plus_defconfig | 11 +++++++++++ > 1 files changed, 11 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig > index ae890ca..407ccf8 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -192,6 +192,17 @@ CONFIG_FIRMWARE_EDID=y > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > CONFIG_FB_OMAP_LCD_VGA=y > +CONFIG_OMAP2_DSS=m > +CONFIG_OMAP2_DSS_RFBI=y > +CONFIG_OMAP2_DSS_SDI=y > +CONFIG_OMAP2_DSS_DSI=y > +CONFIG_FB_OMAP2=m > +CONFIG_PANEL_GENERIC_DPI=m > +CONFIG_PANEL_SHARP_LS037V7DW01=m > +CONFIG_PANEL_NEC_NL8048HL11_01B=m > +CONFIG_PANEL_TAAL=m > +CONFIG_PANEL_TPO_TD043MTEA1=m > +CONFIG_PANEL_ACX565AKM=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_LCD_CLASS_DEVICE=y > CONFIG_LCD_PLATFORM=y ``` ## \[PATCH v6\] OMAP2/3/4: DSS2: Enable Display SubSystem as modules - From: Tony Lindgren \ - Date: 2011-02-24 21:09:51 - Message: https://ratatoskr.run/linux-fbdev/2011/02/8569803.md ```text * Tomi Valkeinen [ref] [110224 00:30]: > On Thu, 2011-02-24 at 00:26 -0600, Nilofer, Samreen wrote: > > Enabling all the display interface options to be built as module > > And enabling all the display panels to be built as modules. > > > > Signed-off-by: Samreen > > This looks good to me. > > Tony, want to ack this? This enables all DSS features as modules. This > should go through dss tree, as this doesn't work without a fix that is > there. Sounds good to me: Acked-by: Tony Lindgren ```