[PATCH] OMAP2/3/4: DSS2: Enable Display SubSystem as modules

Enabling Display options to be built as modules
Also, the generic dpi, sharp & nec panels are also
enabled as modules.

Signed-off-by: Samreen <redacted>
---
 Version5:
        Incorporating the comments from Tony Lindgren, Kevin Hilman,
 Paul Mundt & Tomi Valkeinen to build DSS & panels as modules.
 See: https://patchwork.kernel.org/patch/281492/

 Version4:
       Remove the enabling of the display panels by default.

 Version3:
       Eliminate the separate default number of FBs for
 different architecture. Keeping default FBs as 3 as before.

 Version2:
        Enables by default NEC panel used in zoom2/3/3630sdp, instead of
 Sharp LQ043T1DG01 panel enabled in previous version of this patch.

Testing:
---------
The base used for OMAP3 testing is:
branch: master
commit: 7c23277
URL: git://gitorious.org/linux-omap-dss2/linux.git

And OMAP4 testing is on the following branch + few patches to enable DSI taal panel:
branch: lo-dss2-Feb18
commit: 67bcb5600
URL: git://dev.omapzoom.org/pub/scm/axelcx/kernel-display.git

The patch is tested on 3630zoom, 3430sdp & 4430sdp, it was not tested
on OMAP2 platform due crash seen while boot.
(See: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg43921.html)

 arch/arm/configs/omap2plus_defconfig |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ae890ca..ddcae13 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig

@@ -192,6 +192,11 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_OMAP_LCD_VGA=y
+CONFIG_OMAP2_DSS=m
+CONFIG_FB_OMAP2=m
+CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_SHARP_LS037V7DW01=m
+CONFIG_PANEL_NEC_NL8048HL11_01B=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y

-- 
1.5.6.3

Hi,

On Wed, 2011-02-23 at 06:22 -0600, Nilofer, Samreen wrote:

Enabling Display options to be built as modules
Also, the generic dpi, sharp & nec panels are also
enabled as modules.

I've just posted a patch which fixes the problem with the regulators in
DSS. With that patch we can safely enable all DSS interfaces (and thus
panels) and the resulting binary will work on all boards.

So can you make one more version which enables all the interfaces and
panels as modules, based on
git://gitorious.org/linux-omap-dss2/linux.git master

 Tomi

Hi,
Valkeinen, Tomi wrote:

Hi,

On Wed, 2011-02-23 at 06:22 -0600, Nilofer, Samreen wrote:

quoted

Enabling Display options to be built as modules Also, the generic dpi,
sharp & nec panels are also enabled as modules.

I've just posted a patch which fixes the problem with the
regulators in DSS. With that patch we can safely enable all DSS interfaces
(and thus panels) and the resulting binary will work on all boards.

So can you make one more version which enables all the
interfaces and panels as modules, based on
git://gitorious.org/linux-omap-dss2/linux.git master

[samreen]
Sure. Will post out the next version soon.

 Tomi