# \[PATCH\] Drivers: video: Add modes for Devkit8000 displays

- Subsystems: FRAMEBUFFER LAYER, THE REST
- Maintainers: Helge Deller, Linus Torvalds
- List: linux-fbdev
- 2 messages, 2 authors
- Page: https://ratatoskr.run/linux-fbdev/2011/01/3663875/t

## \[PATCH\] Drivers: video: Add modes for Devkit8000 displays

- From: Thomas Weber \<hidden\>
- Date: 2011-01-10 15:36:28 
- Message: https://ratatoskr.run/linux-fbdev/2011/01/3663875.md

```text
This patch adds the video modes for the 4.3, 5.6 and 7 inch panels that
are sold with the devkit8000.

Signed-off-by: Thomas Weber <redacted>
---
 drivers/video/modedb.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index de450c1..7b2581c 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -274,7 +274,19 @@ static const struct fb_videomode modedb[] = {
        /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
        NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5,
        0, FB_VMODE_INTERLACED
-    },
+    }, {
+       /* 480x272 @ 60 Hz */
+       NULL, 60, 480, 272, KHZ2PICOS(10164), 2, 2, 2, 2, 41, 10,
+       0, FB_VMODE_NONINTERLACED
+    }, {
+       /* 640x480 @ 60 Hz */
+       NULL, 60, 640, 480, KHZ2PICOS(25000), 16, 134, 32, 11, 10, 2,
+       0, FB_VMODE_NONINTERLACED
+    }, {
+       /* 800x480 @ 60 Hz */
+       NULL, 60, 800, 480, KHZ2PICOS(30000), 40, 40, 13, 29, 48, 3,
+       0, FB_VMODE_NONINTERLACED
+    }
 };
 
 #ifdef CONFIG_FB_MODE_HELPERS
-- 
1.7.4.rc1

```

## Re: \[PATCH\] Drivers: video: Add modes for Devkit8000 displays

- From: Paul Mundt \<hidden\>
- Date: 2011-01-11 03:06:37 
- Message: https://ratatoskr.run/linux-fbdev/2011/01/3664178.md

```text
On Mon, Jan 10, 2011 at 04:34:32PM +0100, Thomas Weber wrote:
> This patch adds the video modes for the 4.3, 5.6 and 7 inch panels that
> are sold with the devkit8000.
> 
> Signed-off-by: Thomas Weber <redacted>

The modedb is primarily intended for generic modes that are going to be
used by a multiple of drivers. If you're simply dealing with modes for
panels for a one-off board that no one else is using, then simply keep it
local to the driver. If there are multiple users of the same modes, then
it's of course possible to make it generally available.
```