[PATCH 3/5] S5PC110: add machine specific MIPI-DSI setup code.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig      |    6 +++
 arch/arm/mach-s5pv210/Makefile     |    1 +
 arch/arm/mach-s5pv210/setup-mipi.c |   76 ++++++++++++++++++++++++++++++++++++
 3 files changed, 83 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s5pv210/setup-mipi.c

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 862f239..76da541 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig

@@ -53,6 +53,11 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
+config S5P_SETUP_MIPI_DSI
+	bool
+	help
+	  Common setup code for MIPI-DSI
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA

@@ -92,6 +97,7 @@ config MACH_GONI
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5P_SETUP_MIPI_DSI
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210

diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ff1a0db..638747c 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile

@@ -37,3 +37,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S5P_SETUP_MIPI_DSI)	+= setup-mipi.o

\ No newline at end of file

diff --git a/arch/arm/mach-s5pv210/setup-mipi.c b/arch/arm/mach-s5pv210/setup-mipi.c
new file mode 100644
index 0000000..2cc8cd1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-mipi.c

@@ -0,0 +1,76 @@
+/* linux/arch/arm/plat-s5p/setup-mipi.c
+ *
+ * Samsung MIPI-DSI DPHY driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/mipi-dsi.h>
+#include <plat/regs-dsim.h>
+
+static int s5p_mipi_enable_d_phy(struct dsim_device *dsim, unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);
+	reg |= (enable << 0);
+	writel(reg, S5P_MIPI_CONTROL);
+
+	return 0;
+}
+
+static int s5p_mipi_enable_dsi_master(struct dsim_device *dsim,
+	unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 2);
+	reg |= (enable << 2);
+	writel(reg, S5P_MIPI_CONTROL);
+
+	return 0;
+}
+
+int s5p_mipi_part_reset(struct dsim_device *dsim)
+{
+	writel(S5P_MIPI_M_RESETN, S5P_MIPI_PHY_CON0);
+
+	return 0;
+}
+
+int s5p_mipi_init_d_phy(struct dsim_device *dsim)
+{
+	/**
+	 * DPHY and Master block must be enabled at the system initialization
+	 * step before data access from/to DPHY begins.
+	 */
+	s5p_mipi_enable_d_phy(dsim, 1);
+
+	s5p_mipi_enable_dsi_master(dsim, 1);
+
+	return 0;
+}

-- 
1.7.0.4

InKi Dae wrote:

If this is for S5PV210, please use S5PV210_xxx as prefix. Or this is for S5P
SoCS, move into plat-s5p.

And as I know, this is _not_ only for MIPI DSI master...so need to re-name.

Is this really only for machine?

b/arch/arm/mach-s5pv210/Makefile

Hmm...I didn't find this header in your previous patch.

+#include <plat/regs-dsim.h>

Same.

+
+static int s5p_mipi_enable_d_phy(struct dsim_device *dsim, unsigned int
enable)

Why need struct dsim_device in argument?
As I said, this is for MIPI DSI and MIPI CSI...right?

+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);

Please use __raw_readl here, because no need memory barrier between
operations.

+	reg |= (enable << 0);
+	writel(reg, S5P_MIPI_CONTROL);

Same.

+
+	return 0;

Always, return 0?

If enabled by MIPI DSI and MIPI CSI, how each IP can know other IP's MIPI
enalbling?

+}
+
+static int s5p_mipi_enable_dsi_master(struct dsim_device *dsim,

Same.

+	unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 2);

Same.

+	reg |= (enable << 2);
+	writel(reg, S5P_MIPI_CONTROL);

Same.

+
+	return 0;
+}
+
+int s5p_mipi_part_reset(struct dsim_device *dsim)

Do we really need argument, struct dsim_device?

+{
+	writel(S5P_MIPI_M_RESETN, S5P_MIPI_PHY_CON0);
+
+	return 0;
+}
+
+int s5p_mipi_init_d_phy(struct dsim_device *dsim)
+{
+	/**
+	 * DPHY and Master block must be enabled at the system

initialization

+	 * step before data access from/to DPHY begins.
+	 */
+	s5p_mipi_enable_d_phy(dsim, 1);
+
+	s5p_mipi_enable_dsi_master(dsim, 1);
+
+	return 0;
+}
--

I can't get these needs...I mean need to re-think this for support MIPI
DSI(M) and MIPI CSI(S).
Actually MIPI control is needed in both.


Thanks.

Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

Kukjin Kim 쓴 글:

InKi Dae wrote:

quoted

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig      |    6 +++
 arch/arm/mach-s5pv210/Makefile     |    1 +
 arch/arm/mach-s5pv210/setup-mipi.c |   76
++++++++++++++++++++++++++++++++++++
 3 files changed, 83 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s5pv210/setup-mipi.c

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 862f239..76da541 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig

@@ -53,6 +53,11 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.

+config S5P_SETUP_MIPI_DSI

If this is for S5PV210, please use S5PV210_xxx as prefix. Or this is for S5P
SoCS, move into plat-s5p.

And as I know, this is _not_ only for MIPI DSI master...so need to re-name.

Ok, moved to plat-s5p.

quoted

+	bool
+	help
+	  Common setup code for MIPI-DSI
+
 menu "S5PC110 Machines"

 config MACH_AQUILA

@@ -92,6 +97,7 @@ config MACH_GONI
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5P_SETUP_MIPI_DSI

Is this really only for machine?

quoted

 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210

diff --git a/arch/arm/mach-s5pv210/Makefile

b/arch/arm/mach-s5pv210/Makefile

quoted

index ff1a0db..638747c 100644

--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile

@@ -37,3 +37,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE)		+> setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S5P_SETUP_MIPI_DSI)	+= setup-mipi.o

\ No newline at end of file

diff --git a/arch/arm/mach-s5pv210/setup-mipi.c b/arch/arm/mach-

s5pv210/setup-mipi.c
new file mode 100644
index 0000000..2cc8cd1

--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-mipi.c

@@ -0,0 +1,76 @@
+/* linux/arch/arm/plat-s5p/setup-mipi.c
+ *
+ * Samsung MIPI-DSI DPHY driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/mipi-dsi.h>

Hmm...I didn't find this header in your previous patch.

previous patch??

quoted

+#include <plat/regs-dsim.h>

Same.

quoted

+
+static int s5p_mipi_enable_d_phy(struct dsim_device *dsim, unsigned int
enable)

Why need struct dsim_device in argument?
As I said, this is for MIPI DSI and MIPI CSI...right?

quoted

+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);

Please use __raw_readl here, because no need memory barrier between
operations.

quoted

+	reg |= (enable << 0);
+	writel(reg, S5P_MIPI_CONTROL);

Same.

quoted

+
+	return 0;

Always, return 0?

If enabled by MIPI DSI and MIPI CSI, how each IP can know other IP's MIPI
enalbling?

ok, naming issue sould be considered more.
hm, how about using "DSIM"? I think S5P_MIPI_DSI or MIPI_DSI is too long.

quoted

+}
+
+static int s5p_mipi_enable_dsi_master(struct dsim_device *dsim,

Same.

quoted

+	unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(S5P_MIPI_CONTROL) & ~(1 << 2);

Same.

quoted

+	reg |= (enable << 2);
+	writel(reg, S5P_MIPI_CONTROL);

Same.

quoted

+
+	return 0;
+}
+
+int s5p_mipi_part_reset(struct dsim_device *dsim)

Do we really need argument, struct dsim_device?

It doesn't. setup-mipi.c is specific to SoC platform.
these functions should be registered to mipi-dsi platform data as 
callbacks in other words, mipi-dsi driver calls them so according to 
mipi-dsi master framework rule, I added dsim_device as argument.
anyway, don't care.

quoted

+{
+	writel(S5P_MIPI_M_RESETN, S5P_MIPI_PHY_CON0);
+
+	return 0;
+}
+
+int s5p_mipi_init_d_phy(struct dsim_device *dsim)
+{
+	/**
+	 * DPHY and Master block must be enabled at the system

initialization

quoted

+	 * step before data access from/to DPHY begins.
+	 */
+	s5p_mipi_enable_d_phy(dsim, 1);
+
+	s5p_mipi_enable_dsi_master(dsim, 1);
+
+	return 0;
+}
--

I can't get these needs...I mean need to re-think this for support MIPI
DSI(M) and MIPI CSI(S).
Actually MIPI control is needed in both.

I agree to your opinion.
it would be corrected, "MIPI" -> "DSIM"

Thanks.

Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

On 01/03/2011 02:48 AM, daeinki wrote:

Kukjin Kim 쓴 글:

quoted

InKi Dae wrote:

quoted

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
arch/arm/mach-s5pv210/Kconfig | 6 +++
arch/arm/mach-s5pv210/Makefile | 1 +
arch/arm/mach-s5pv210/setup-mipi.c | 76
++++++++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5pv210/setup-mipi.c

diff --git a/arch/arm/mach-s5pv210/Kconfig

b/arch/arm/mach-s5pv210/Kconfig
index 862f239..76da541 100644

--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig

@@ -53,6 +53,11 @@ config S5PV210_SETUP_SDHCI_GPIO

help
Common setup code for SDHCI gpio.

+config S5P_SETUP_MIPI_DSI

If this is for S5PV210, please use S5PV210_xxx as prefix. Or this is
for S5P
SoCS, move into plat-s5p.

And as I know, this is _not_ only for MIPI DSI master...so need to
re-name.

Ok, moved to plat-s5p.

quoted

quoted

+ bool
+ help
+ Common setup code for MIPI-DSI
+
menu "S5PC110 Machines"

config MACH_AQUILA

@@ -92,6 +97,7 @@ config MACH_GONI

select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5P_SETUP_MIPI_DSI

Is this really only for machine?

quoted

help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210

diff --git a/arch/arm/mach-s5pv210/Makefile

b/arch/arm/mach-s5pv210/Makefile

quoted

index ff1a0db..638747c 100644

--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile

@@ -37,3 +37,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE) +>> setup-ide.o

obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5P_SETUP_MIPI_DSI) += setup-mipi.o
\ No newline at end of file

diff --git a/arch/arm/mach-s5pv210/setup-mipi.c b/arch/arm/mach-

s5pv210/setup-mipi.c
new file mode 100644
index 0000000..2cc8cd1

--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-mipi.c

@@ -0,0 +1,76 @@
+/* linux/arch/arm/plat-s5p/setup-mipi.c
+ *
+ * Samsung MIPI-DSI DPHY driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/mipi-dsi.h>

Hmm...I didn't find this header in your previous patch.

previous patch??

quoted

quoted

+#include <plat/regs-dsim.h>

Same.

quoted

+
+static int s5p_mipi_enable_d_phy(struct dsim_device *dsim, unsigned int
enable)

Why need struct dsim_device in argument?
As I said, this is for MIPI DSI and MIPI CSI...right?

quoted

+{
+ unsigned int reg;
+
+ reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);

Please use __raw_readl here, because no need memory barrier between
operations.

quoted

+ reg |= (enable << 0);
+ writel(reg, S5P_MIPI_CONTROL);

Same.

quoted

+
+ return 0;

Always, return 0?

If enabled by MIPI DSI and MIPI CSI, how each IP can know other IP's MIPI
enalbling?

ok, naming issue sould be considered more.
hm, how about using "DSIM"? I think S5P_MIPI_DSI or MIPI_DSI is too long.

I think that Kukjin's question is not about naming but about the logic 
behind your interface. If I understand correctly bit 0 in
"S5P_MIPI_CONTROL" register is a common enable bit for both the camera
and display MIPI PHYs. Only the PHY reset bits are separate for both
PHYs. We need to create callbacks for both (DSIM, CSIS) drivers here.
And S5P_MIPI_CONTROL register access must be protected from possible 
races when CSIS and DSIM drivers are trying to use it at the same time.
Actually I did some work towards camera interface support, in regards of 
the PHY control, possibly I can post some RFC patches tomorrow.

I have also tried to exploit the shared I/O region support as described 
here: http://lwn.net/Articles/338837 . However it seems not really 
applicable to our case or would need an extension. And it would add
a relatively large overhead for controlling just a single shared memory 
mapped register..

Regards,
Sylwester

Sylwester Nawrocki 쓴 글:

On 01/03/2011 02:48 AM, daeinki wrote:

quoted

Kukjin Kim 쓴 글:

quoted

InKi Dae wrote:

quoted

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
arch/arm/mach-s5pv210/Kconfig | 6 +++
arch/arm/mach-s5pv210/Makefile | 1 +
arch/arm/mach-s5pv210/setup-mipi.c | 76
++++++++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5pv210/setup-mipi.c

diff --git a/arch/arm/mach-s5pv210/Kconfig

b/arch/arm/mach-s5pv210/Kconfig
index 862f239..76da541 100644

--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig

@@ -53,6 +53,11 @@ config S5PV210_SETUP_SDHCI_GPIO

help
Common setup code for SDHCI gpio.

+config S5P_SETUP_MIPI_DSI

If this is for S5PV210, please use S5PV210_xxx as prefix. Or this is
for S5P
SoCS, move into plat-s5p.

And as I know, this is _not_ only for MIPI DSI master...so need to
re-name.

Ok, moved to plat-s5p.

quoted

quoted

+ bool
+ help
+ Common setup code for MIPI-DSI
+
menu "S5PC110 Machines"

config MACH_AQUILA

@@ -92,6 +97,7 @@ config MACH_GONI

select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5P_SETUP_MIPI_DSI

Is this really only for machine?

quoted

help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210

diff --git a/arch/arm/mach-s5pv210/Makefile

b/arch/arm/mach-s5pv210/Makefile

quoted

index ff1a0db..638747c 100644

--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile

@@ -37,3 +37,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE) +>>> setup-ide.o

obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5P_SETUP_MIPI_DSI) += setup-mipi.o
\ No newline at end of file

diff --git a/arch/arm/mach-s5pv210/setup-mipi.c b/arch/arm/mach-

s5pv210/setup-mipi.c
new file mode 100644
index 0000000..2cc8cd1

--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-mipi.c

@@ -0,0 +1,76 @@
+/* linux/arch/arm/plat-s5p/setup-mipi.c
+ *
+ * Samsung MIPI-DSI DPHY driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/mipi-dsi.h>

Hmm...I didn't find this header in your previous patch.

previous patch??

quoted

quoted

+#include <plat/regs-dsim.h>

Same.

quoted

+
+static int s5p_mipi_enable_d_phy(struct dsim_device *dsim, unsigned 
int
enable)

Why need struct dsim_device in argument?
As I said, this is for MIPI DSI and MIPI CSI...right?

quoted

+{
+ unsigned int reg;
+
+ reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);

Please use __raw_readl here, because no need memory barrier between
operations.

quoted

+ reg |= (enable << 0);
+ writel(reg, S5P_MIPI_CONTROL);

Same.

quoted

+
+ return 0;

Always, return 0?

If enabled by MIPI DSI and MIPI CSI, how each IP can know other IP's 
MIPI
enalbling?

ok, naming issue sould be considered more.
hm, how about using "DSIM"? I think S5P_MIPI_DSI or MIPI_DSI is too long.

I think that Kukjin's question is not about naming but about the logic 
behind your interface. If I understand correctly bit 0 in
"S5P_MIPI_CONTROL" register is a common enable bit for both the camera
and display MIPI PHYs. Only the PHY reset bits are separate for both
PHYs. We need to create callbacks for both (DSIM, CSIS) drivers here.
And S5P_MIPI_CONTROL register access must be protected from possible 
races when CSIS and DSIM drivers are trying to use it at the same time.
Actually I did some work towards camera interface support, in regards of 
the PHY control, possibly I can post some RFC patches tomorrow.

I have also tried to exploit the shared I/O region support as described 
here: http://lwn.net/Articles/338837 . However it seems not really 
applicable to our case or would need an extension. And it would add
a relatively large overhead for controlling just a single shared memory 
mapped register..

I and Mr. Kukjin had discussion about MIPI DPHY issue yesterday.(they, 
DSI and CSI, share MIPI CONTROL register.) the issue was holded(you 
tried to resolve that before) so we need to have discussion about that.
post your RFC patches please then we could get any good idea.

thank you.

Regards,
Sylwester
-- 
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html