Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.
PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.
PATCH 3/3: add MIPI-DSI driver for S5PV210.
driver features:
. Maximum resolution ranges up to XGA (1024x760)
. CSIS0 supports 1,2,3 or 4 data lanes
. CSIS1 supports 1 or 2 data lanes
. supports pixel format : 16bpp, 18bpp packed,
18bpp loosely packed (3 byte format), and 24bpp
. supports RGB interface for video image from display controller
. support I80 interface for command mode image input from display controller
. supports PMS control inteerface for PLL to configure byte clock frequency
. supports Prescaler to generate escape clock from byte clock
thank you.
signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
Hello, Paul.
I had posted patch sets below on 15 Apr.
but there is no any comments.
please review this patch sets.
thank you.
---------- Forwarded message ----------
From: daeinki <inki.dae@samsung.com>
Date: 2011/4/14
Subject: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
To: linux-fbdev@vger.kernel.org, lethal@linux-sh.org
ÂüÁ¶: kyungmin.park@samsung.com, Kukjin Kim [off-list ref],
akpm@linux-foundation.org, linux-arm-kernel@lists.infradead.org
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel