# Re: \[PATCH v3\] Frame Buffer driver for TI DA8xx/OMAP-L1xx

- From: Rajashekhara, Sudhakar \<hidden\>
- Date: 2009-06-30 06:26:36 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2009/06/13459719
- Thread: https://ratatoskr.run/linux-fbdev/2009/06/13459708/t.md

```text
Hi,

On Fri, Jun 26, 2009 at 10:48:55, Krzysztof Helt wrote:
> On Wed, 24 Jun 2009 06:58:21 -0400
> "Rajashekhara, Sudhakar" [ref] wrote:
> 
> > Adds LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture.
> > LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a.
> > 
> > LCDC on DA8xx consists of two independent controllers, the Raster Controller
> > and the LCD Interface Display Driver (LIDD) controller. LIDD further supports
> > character and graphic displays.
> > 
> > This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on
> > the DA830 based EVM. The EVM details can be found at:
> > http://support.spectrumdigital.com/boards/dskda830/revc/.
> > 
> > Signed-off-by: Sudhakar Rajashekhara <redacted>
> > Signed-off-by: Pavel Kiryukhin <redacted>
> > Signed-off-by: Steve Chen <redacted>
> > ---

[...]

> 
> The true color modes do not use the palette entry. I assume
> that the value below forces controller to use true color mode.
> 
> > +		palette[0] = 0x4000;
> > +	}
> > +

You are right. The above line enables the true color mode.

I tested the driver with the changes suggested by you. I'll
be submitting the v4 version of the patch soon.

Regards,
Sudhakar



------------------------------------------------------------------------------
```