[Review Patch] V4L2 driver on Tomis DSS patches

@@ -44,7 +44,6 @@
 #include "twl4030-generic-scripts.h"
 #include "mmc-twl4030.h"

-
 static struct resource omap3evm_smc911x_resources[] = {
 	[0] =	{
 		.start  = OMAP3EVM_ETHR_START,

@@ -65,6 +64,25 @@ static struct platform_device omap3evm_smc911x_device = {
 	.resource	= &omap3evm_smc911x_resources [0],
 };

+static struct resource omap3evm_vout_resource[] = {
+	[0] =	{
+		.start  = OMAP34XX_VRFB_CTX4,
+		.end    = (OMAP34XX_VRFB_CTX4 + OMAP34XX_VRFB_CTX_SIZE - 1),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start  = OMAP34XX_VRFB_CTX8,
+		.end    = (OMAP34XX_VRFB_CTX8 + OMAP34XX_VRFB_CTX_SIZE - 1),
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap3evm_vout_device = {
+	.name			= "omap_vout",
+	.num_resources	= ARRAY_SIZE(omap3evm_vout_resource),
+	.resource 		= &omap3evm_vout_resource[0],
+	.id		= -1,
+};
 static inline void __init omap3evm_init_smc911x(void)
 {
 	int eth_cs;

@@ -348,7 +366,6 @@ static void evm_panel_disable_dvi(struct omap_display *display)
 	dvi_enabled = 0;
 }

-
 static struct omap_display_data evm_display_data_dvi = {
 	.type = OMAP_DISPLAY_TYPE_DPI,
 	.name = "dvi",

@@ -438,6 +455,8 @@ static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&evm_dss_device,
 	&omap3evm_smc911x_device,
+	&omap3evm_vout_device,
+
 };

 static struct twl4030_hsmmc_info mmc[] __initdata = {

@@ -56,6 +56,19 @@
 #define OMAP34XX_SR1_BASE	0x480C9000
 #define OMAP34XX_SR2_BASE	0x480CB000

+#define OMAP34XX_VRFB_CTX0	0x70000000
+#define OMAP34XX_VRFB_CTX1	0x74000000
+#define OMAP34XX_VRFB_CTX2	0x78000000
+#define OMAP34XX_VRFB_CTX3	0x7C000000
+#define OMAP34XX_VRFB_CTX4	0xE0000000
+#define OMAP34XX_VRFB_CTX5	0xE4000000
+#define OMAP34XX_VRFB_CTX6	0xE8000000
+#define OMAP34XX_VRFB_CTX7	0xEC000000
+#define OMAP34XX_VRFB_CTX8	0xF0000000
+#define OMAP34XX_VRFB_CTX9	0xF4000000
+#define OMAP34XX_VRFB_CTX10	0xF8000000
+#define OMAP34XX_VRFB_CTX11	0xFC000000
+#define OMAP34XX_VRFB_CTX_SIZE	0x4000000

 #if defined(CONFIG_ARCH_OMAP3430)

@@ -700,6 +700,15 @@ config VIDEO_CAFE_CCIC
 	  CMOS camera controller.  This is the controller found on first-
 	  generation OLPC systems.

+config VIDEO_OMAP3
+	bool "OMAP2/OMAP3 V4L2-DSS drivers"
+	depends on VIDEO_DEV && (ARCH_OMAP24XX || ARCH_OMAP34XX)
+	default y
+	---help---
+        V4L2 DSS driver support for OMAP2/3 based boards.
+
+source "drivers/media/video/omap/Kconfig"
+
 config SOC_CAMERA
 	tristate "SoC camera support"
 	depends on VIDEO_V4L2 && HAS_DMA

@@ -99,6 +99,8 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o

+obj-$(CONFIG_VIDEO_OMAP3) += omap/
+
 obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o

 obj-$(CONFIG_USB_DABUSB)        += dabusb.o

@@ -0,0 +1,12 @@
+config VIDEO_OMAP_VIDEOLIB
+	tristate "OMAP Video out library"
+	depends on VIDEO_OMAP3
+	default VIDEO_OMAP3
+
+config VIDEO_OMAP_VIDEOOUT
+	tristate "OMAP Video out driver"
+	select VIDEOBUF_DMA_SG
+	select VIDEOBUF_GEN
+	depends on VIDEO_OMAP3
+	default VIDEO_OMAP3
+

@@ -0,0 +1,3 @@
+obj-$(CONFIG_VIDEO_OMAP_VIDEOLIB) += omap_voutlib.o
+obj-$(CONFIG_VIDEO_OMAP_VIDEOOUT) += omap_vout.o
+

@@ -0,0 +1,1589 @@
+/*
+ * drivers/media/video/omap/omap_vout.c
+ *
+ * Copyright (C) 2005-2006 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * Leveraged code from the OMAP2 camera driver
+ * Video-for-Linux (Version 2) camera capture driver for
+ * the OMAP24xx camera controller.
+ *
+ * Author: Andy Lowe (source@mvista.com)
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * History:
+ * 20-APR-2006	Khasim		Modified VRFB based Rotation,
+ *				The image data is always read from 0 degree
+ *				view and written
+ *				to the virtual space of desired rotation angle
+ * 4-DEC-2006 Jian		Changed to support better memory management
+ *
+ * 17-Nov-2008 Hardik		Changed to used the new DSS paches by Tomi
+ *				Changed driver to use video_ioctl2
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/videodev2.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <media/videobuf-dma-sg.h>
+#include <linux/input.h>
+#include <linux/dma-mapping.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#ifdef CONFIG_PM
+#include <linux/notifier.h>
+#include <linux/pm.h>
+#endif
+#ifdef CONFIG_DPM
+#include <linux/dpm.h>
+#endif
+
+#include <mach/display.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/semaphore.h>
+#include <asm/processor.h>
+#include <mach/dma.h>
+
+#include "omap_voutlib.h"
+
+/*
+ * Un-comment this to use Debug Write call
+ */
+/* #define DEBUG_ALLOW_WRITE */
+
+#include "omap_voutdef.h"
+
+unsigned long timeout;
+
+#define OMAP_VIDEO1 0
+#define OMAP_VIDEO2 1
+
+/*
+ * Uncomment this if debugging support needs to be enabled
+ */
+
+/* #define DEBUG */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK(ARGS...)  (printk(KERN_DEBUG "<%s>: ", __func__); \
+				printk(KERN_DEBUG ARGS))
+#else
+#define DPRINTK(x...)
+#endif
+
+struct omap_display *def_display;
+
+/* configuration macros */
+#define VOUT_NAME		"omap_vout"
+
+#define QQVGA_WIDTH		160
+#define QQVGA_HEIGHT		120
+
+#define NUM_OF_VIDEO_CHANNELS	2
+
+#define VID_MAX_WIDTH		480	/* Largest width */
+#define VID_MAX_HEIGHT		640	/* Largest height */
+
+#define VID_MIN_WIDTH		0
+#define VID_MIN_HEIGHT		0
+
+#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
+
+static struct omap_vout_device *saved_v1out, *saved_v2out;
+
+#define STREAMING_IS_ON()	((saved_v1out && saved_v1out->streaming) || \
+				(saved_v2out && saved_v2out->streaming))
+
+/*
+ * this is the layer being linked to (slave layer). possible values are:
+ * OMAP_VIDEO1:  V1 is linked to V2. V1 uses V2's pix and crop.
+ * OMAP_VIDEO2:  V2 is linked to V1. V2 uses V1's pix and crop.
+ * -1: no link.
+ */
+
+static int vout_linked;
+static spinlock_t vout_link_lock;
+
+static struct videobuf_queue_ops video_vbq_ops;
+
+static u32 video1_numbuffers = 3;
+static u32 video2_numbuffers = 3;
+static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
+static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
+module_param(video1_numbuffers, uint, S_IRUGO);
+module_param(video2_numbuffers, uint, S_IRUGO);
+module_param(video1_bufsize, uint, S_IRUGO);
+module_param(video2_bufsize, uint, S_IRUGO);
+
+static int omapvout_create_vout_devices(struct platform_device *pdev);
+static int omapvid_apply_changes(struct omap_vout_device *vout, u32 addr,
+		int init);
+static int omapvid_setup_overlay(struct omap_vout_device *vout,
+		struct omap_overlay *ovl, int posx, int posy,
+		int outw, int outh, u32 addr);
+static enum omap_color_mode video_mode_to_dss_mode(struct v4l2_pix_format *pix);
+static void omap_vout_isr(void *arg, unsigned int irqstatus);
+static void omap_vout_cleanup_device(struct omap_vout_device *vout);
+/* module parameters */
+
+/*
+ * Maximum amount of memory to use for rendering buffers.
+ * Default is enough to four (RGB24) VGA buffers.
+ */
+#define MAX_ALLOWED_VIDBUFFERS            4
+#if 0
+static struct v4l2_queryctrl omap_vout_qctrl[] = {
+	{
+		.id            = V4L2_CID_ROTATION,
+		.name          = "Rotation",
+		.minimum       = 0,
+		.maximum       = 270,
+		.step          = 90,
+		.default_value = -1,
+		.flags         = 0,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+	}, {
+		.id            = V4L2_CID_BG_COLOR,
+		.name          = "Background Color",
+		.minimum       = 0,
+		.maximum       = 0xFFFFFF,
+		.step          = 1,
+		.default_value = 0,
+		.flags         = 0,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+	}, {
+		.id            = V4L2_CID_VFLIP,
+		.name          = "Mirroring",
+		.minimum       = 0,
+		.maximum       = 1,
+		.step          = 1,
+		.default_value = 0,
+		.flags         = 0,
+		.type          = V4L2_CTRL_TYPE_BOOLEAN,
+	}
+};
+#endif
+/* list of image formats supported by OMAP2 video pipelines */
+const static struct v4l2_fmtdesc omap_formats[] = {
+	{
+	 /* Note:  V4L2 defines RGB565 as:
+	  *
+	  *      Byte 0                    Byte 1
+	  *      g2 g1 g0 r4 r3 r2 r1 r0   b4 b3 b2 b1 b0 g5 g4 g3
+	  *
+	  * We interpret RGB565 as:
+	  *
+	  *      Byte 0                    Byte 1
+	  *      g2 g1 g0 b4 b3 b2 b1 b0   r4 r3 r2 r1 r0 g5 g4 g3
+	  */
+	 .description = "RGB565, le",
+	 .pixelformat = V4L2_PIX_FMT_RGB565,
+	 },
+	{
+	 /* Note:  V4L2 defines RGB565X as:
+	  *
+	  *      Byte 0                    Byte 1
+	  *      b4 b3 b2 b1 b0 g5 g4 g3   g2 g1 g0 r4 r3 r2 r1 r0
+	  *
+	  * We interpret RGB565X as:
+	  *
+	  *      Byte 0                    Byte 1
+	  *      r4 r3 r2 r1 r0 g5 g4 g3   g2 g1 g0 b4 b3 b2 b1 b0
+	  */
+	 .description = "RGB565, be",
+	 .pixelformat = V4L2_PIX_FMT_RGB565X,
+	 },
+	{
+	 /* Note:  V4L2 defines RGB32 as: RGB-8-8-8-8  we use
+	  *  this for RGB24 unpack mode, the last 8 bits are ignored
+	  * */
+	 .description = "RGB32, le",
+	 .pixelformat = V4L2_PIX_FMT_RGB32,
+	 },
+	{
+	 /* Note:  V4L2 defines RGB24 as: RGB-8-8-8  we use
+	  *        this for RGB24 packed mode
+	  *
+	  */
+	 .description = "RGB24, le",
+	 .pixelformat = V4L2_PIX_FMT_RGB24,
+	 },
+	{
+	 .description = "YUYV (YUV 4:2:2), packed",
+	 .pixelformat = V4L2_PIX_FMT_YUYV,
+	 },
+	{
+	 .description = "UYVY, packed",
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 },
+};
+
+#define NUM_OUTPUT_FORMATS (sizeof(omap_formats)/sizeof(omap_formats[0]))
+
+struct omap_vout_std_id_name {
+	v4l2_std_id id;
+	char name[25];
+};
+
+static unsigned long
+omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
+{
+	unsigned long virt_addr, addr;
+	u32 order, size;
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+	virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order);
+	addr = virt_addr;
+	if (virt_addr) {
+		while (size > 0) {
+			SetPageReserved(virt_to_page(addr));
+			addr += PAGE_SIZE;
+			size -= PAGE_SIZE;
+		}
+	}
+	*phys_addr = (u32) virt_to_phys((void *) virt_addr);
+	return virt_addr;
+}
+
+static void
+omap_vout_free_buffer(unsigned long virtaddr, u32 phys_addr,
+			 u32 buf_size)
+{
+	unsigned long addr = virtaddr;
+	u32 order, size;
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+	while (size > 0) {
+		ClearPageReserved(virt_to_page(addr));
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	free_pages((unsigned long) virtaddr, order);
+}
+
+static int omap_vout_try_format(struct v4l2_pix_format *pix,
+				struct v4l2_pix_format *def_pix)
+{
+	int ifmt, bpp = 0;
+
+	if (pix->width > VID_MAX_WIDTH)
+		pix->width = VID_MAX_WIDTH;
+	if (pix->height > VID_MAX_HEIGHT)
+		pix->height = VID_MAX_HEIGHT;
+
+	if (pix->width <= VID_MIN_WIDTH)
+		pix->width = def_pix->width;
+	if (pix->height <= VID_MIN_HEIGHT)
+		pix->height = def_pix->height;
+
+	for (ifmt = 0; ifmt < NUM_OUTPUT_FORMATS; ifmt++) {
+		if (pix->pixelformat == omap_formats[ifmt].pixelformat)
+			break;
+	}
+
+	if (ifmt == NUM_OUTPUT_FORMATS)
+		ifmt = 0;
+
+	pix->pixelformat = omap_formats[ifmt].pixelformat;
+	pix->field = V4L2_FIELD_ANY;
+	pix->priv = 0;
+
+	switch (pix->pixelformat) {
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_UYVY:
+	default:
+		pix->colorspace = V4L2_COLORSPACE_JPEG;
+		bpp = YUYV_BPP;
+		break;
+	case V4L2_PIX_FMT_RGB565:
+	case V4L2_PIX_FMT_RGB565X:
+		pix->colorspace = V4L2_COLORSPACE_SRGB;
+		bpp = RGB565_BPP;
+		break;
+	case V4L2_PIX_FMT_RGB24:
+		pix->colorspace = V4L2_COLORSPACE_SRGB;
+		bpp = RGB24_BPP;
+		break;
+	case V4L2_PIX_FMT_RGB32:
+	case V4L2_PIX_FMT_BGR32:
+		pix->colorspace = V4L2_COLORSPACE_SRGB;
+		bpp = RGB32_BPP;
+		break;
+	}
+	pix->bytesperline = pix->width * bpp;
+	pix->sizeimage = pix->bytesperline * pix->height;
+	return bpp;
+}
+
+/*
+ * omap_vout_uservirt_to_phys: This inline function is used to convert user
+ * space virtual address to physical address.
+ */
+	static inline u32 omap_vout_uservirt_to_phys(u32 virtp)
+{
+	unsigned long physp = 0;
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+
+	vma = find_vma(mm, virtp);
+	/* For kernel direct-mapped memory, take the easy way */
+	if (virtp >= PAGE_OFFSET) {
+		physp = virt_to_phys((void *) virtp);
+	} else if ((vma) && (vma->vm_flags & VM_IO)
+		   && (vma->vm_pgoff)) {
+		/* this will catch, kernel-allocated,
+		   mmaped-to-usermode addresses */
+		physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
+	} else {
+		/* otherwise, use get_user_pages() for general userland pages */
+		int res, nr_pages = 1;
+		struct page *pages;
+		down_read(&current->mm->mmap_sem);
+
+		res = get_user_pages(current, current->mm, virtp, nr_pages,
+				1, 0, &pages, NULL);
+		up_read(&current->mm->mmap_sem);
+
+		if (res == nr_pages) {
+			physp =  __pa(page_address(&pages[0]) +
+					(virtp & ~PAGE_MASK));
+		} else {
+			printk(KERN_WARNING "omap_vout_uservirt_to_phys:\
+					get_user_pages failed\n");
+			return 0;
+		}
+	}
+
+	return physp;
+}
+
+/* Buffer setup function is called by videobuf layer when REQBUF ioctl is
+ * called. This is used to setup buffers and return size and count of
+ * buffers allocated. After the call to this buffer, videobuf layer will
+ * setup buffer queue depending on the size and count of buffers
+ */
+static int
+omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
+			  unsigned int *size)
+{
+	struct omap_vout_fh *fh = (struct omap_vout_fh *) q->priv_data;
+	struct omap_vout_device *vout = fh->vout;
+	int startindex = 0, i;
+	u32 phy_addr = 0, virt_addr = 0;
+
+	if (!vout)
+		return -EINVAL;
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != q->type)
+		return -EINVAL;
+
+	startindex = (vout->vid == OMAP_VIDEO1) ?
+		video1_numbuffers : video2_numbuffers;
+	if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex)
+		*count = startindex;
+
+	*count = 4;
+
+	if (V4L2_MEMORY_MMAP != vout->memory)
+		return 0;
+
+	*size = vout->buffer_size;
+	startindex = (vout->vid == OMAP_VIDEO1) ?
+		video1_numbuffers : video2_numbuffers;
+	for (i = startindex; i < *count; i++) {
+		vout->buffer_size = *size;
+
+		virt_addr = omap_vout_alloc_buffer(vout->buffer_size,
+				&phy_addr);
+		if (!virt_addr)
+			break;
+
+		vout->buf_virt_addr[i] = virt_addr;
+		vout->buf_phy_addr[i] = phy_addr;
+	}
+
+	*count = vout->buffer_allocated = i;
+	return 0;
+}
+
+/* This function will be called when VIDIOC_QBUF ioctl is called.
+ * It prepare buffers before give out for the display. This function
+ * user space virtual address into physical address if userptr memory
+ * exchange mechanism is used. If rotation is enabled, it copies entire
+ * buffer into VRFB memory space before giving it to the DSS.
+ */
+static int
+omap_vout_buffer_prepare(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb,
+			    enum v4l2_field field)
+{
+	struct omap_vout_fh *fh = (struct omap_vout_fh *) q->priv_data;
+	struct omap_vout_device *vout = fh->vout;
+	struct videobuf_dmabuf *dmabuf = NULL;
+
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = vout->pix.width;
+		vb->height = vout->pix.height;
+		vb->size = vb->width * vb->height * vout->bpp;
+		vb->field = field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+	/* if user pointer memory mechanism is used, get the physical
+	 * address of the buffer
+	 */
+	if (V4L2_MEMORY_USERPTR == vb->memory) {
+		if (0 == vb->baddr)
+			return -EINVAL;
+		/* Virtual address */
+		/* priv points to struct videobuf_pci_sg_memory. But we went
+		 * pointer to videobuf_dmabuf, which is member of
+		 * videobuf_pci_sg_memory */
+		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
+		dmabuf->vmalloc = (void *) vb->baddr;
+
+		/* Physical address */
+		dmabuf->bus_addr = (dma_addr_t)
+			omap_vout_uservirt_to_phys(vb->baddr);
+	}
+
+	{
+		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
+
+		vout->queued_buf_addr[vb->i] = (u8 *) dmabuf->bus_addr;
+	}
+	return 0;
+}
+
+/* Buffer queue funtion will be called from the videobuf layer when _QBUF
+ * ioctl is called. It is used to enqueue buffer, which is ready to be
+ * displayed. */
+static void
+omap_vout_buffer_queue(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb)
+{
+	struct omap_vout_fh *fh =
+	    (struct omap_vout_fh *) q->priv_data;
+	struct omap_vout_device *vout = fh->vout;
+
+	/* Driver is also maintainig a queue. So enqueue buffer in the driver
+	 * queue */
+	list_add_tail(&vb->queue, &vout->dma_queue);
+
+	vb->state = VIDEOBUF_PREPARED;
+}
+
+/* Buffer release function is called from videobuf layer to release buffer
+ * which are already allocated */
+static void
+omap_vout_buffer_release(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb)
+{
+	struct omap_vout_fh *fh = (struct omap_vout_fh *) q->priv_data;
+	struct omap_vout_device *vout = fh->vout;
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+
+	if (V4L2_MEMORY_MMAP != vout->memory)
+		return;
+}
+
+/*
+ *  file operations
+ */
+static void omap_vout_vm_open(struct vm_area_struct *vma)
+{
+	struct omap_vout_device *vout = vma->vm_private_data;
+	DPRINTK("vm_open [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end);
+	vout->mmap_count++;
+}
+
+static void omap_vout_vm_close(struct vm_area_struct *vma)
+{
+	struct omap_vout_device *vout = vma->vm_private_data;
+	DPRINTK("vm_close [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end);
+	vout->mmap_count--;
+}
+
+static struct vm_operations_struct omap_vout_vm_ops = {
+	.open = omap_vout_vm_open,
+	.close = omap_vout_vm_close,
+};
+
+static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct omap_vout_fh *fh = file->private_data;
+	struct omap_vout_device *vout = fh->vout;
+	struct videobuf_queue *q = &fh->vbq;
+	unsigned long size = (vma->vm_end - vma->vm_start);
+	unsigned long start = vma->vm_start;
+	int i;
+	void *pos;
+	struct videobuf_dmabuf *dmabuf = NULL;
+
+	DPRINTK("pgoff=0x%lx, start=0x%lx, end=0x%lx\n", vma->vm_pgoff,
+		vma->vm_start, vma->vm_end);
+
+	/* look for the buffer to map */
+	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+		if (NULL == q->bufs[i])
+			continue;
+		if (V4L2_MEMORY_MMAP != q->bufs[i]->memory)
+			continue;
+		if (q->bufs[i]->boff == (vma->vm_pgoff << PAGE_SHIFT))
+			break;
+	}
+
+	if (VIDEO_MAX_FRAME == i) {
+		DPRINTK("offset invalid [offset=0x%lx]\n",
+			(vma->vm_pgoff << PAGE_SHIFT));
+		return -EINVAL;
+	}
+	q->bufs[i]->baddr = vma->vm_start;
+
+	vma->vm_flags |= VM_RESERVED;
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	vma->vm_ops = &omap_vout_vm_ops;
+	vma->vm_private_data = (void *) vout;
+	dmabuf = videobuf_to_dma(q->bufs[i]);
+	pos = dmabuf->vmalloc;
+	while (size > 0) {
+		unsigned long pfn;
+		pfn = virt_to_phys((void *) pos) >> PAGE_SHIFT;
+		if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vout->mmap_count++;
+	return 0;
+}
+
+static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
+{
+	int num_buffers = 0, i;
+	num_buffers = (vout->vid == OMAP_VIDEO1) ?
+	    video1_numbuffers : video2_numbuffers;
+	for (i = num_buffers; i < vout->buffer_allocated; i++) {
+		if (vout->buf_virt_addr[i]) {
+			omap_vout_free_buffer(vout->buf_virt_addr[i],
+				 vout->buf_phy_addr[i], vout->buffer_size);
+		}
+		vout->buf_virt_addr[i] = 0;
+		vout->buf_phy_addr[i] = 0;
+	}
+	for (i = 0; i < 4; i++) {
+		if (vout->smsshado_virt_addr[i]) {
+			omap_vout_free_buffer(vout->smsshado_virt_addr[i],
+					vout->smsshado_phy_addr[i],
+					vout->smsshado_size);
+			vout->smsshado_virt_addr[i] = 0;
+			vout->smsshado_phy_addr[i] = 0;
+		}
+	}
+	vout->buffer_allocated = num_buffers;
+}
+
+static int omap_vout_release(struct inode *inode, struct file *file)
+{
+
+	struct omap_vout_fh *fh = file->private_data;
+	struct omap_vout_device *vout;
+	struct videobuf_queue *q;
+	unsigned int t;
+	struct omapvideo_info *ovid;
+	unsigned int r;
+
+	vout = fh->vout;
+
+	ovid = &(vout->vid_info);
+	if (fh == 0)
+		return 0;
+	if (!vout)
+		return 0;
+	q = &fh->vbq;
+
+	/* Disable all the overlay managers connected with this interface */
+	for (t = 0; t < ovid->num_overlays; t++) {
+			struct omap_overlay *ovl = ovid->overlays[t];
+			if (ovl->manager && ovl->manager->display)
+				ovl->enable(ovl, 0);
+		}
+
+	r = omapvid_apply_changes(vout, 0, 0);
+		if (r)
+			printk(KERN_ERR VOUT_NAME "failed to change mode\n");
+
+	/* Even if apply changes fails we should continue
+	   freeing allocated memeory */
+	if (fh->io_allowed) {
+		videobuf_streamoff(q);
+		videobuf_queue_cancel(q);
+		/* Free all buffers */
+		omap_vout_free_allbuffers(vout);
+		videobuf_mmap_free(q);
+	}
+
+	if (vout->streaming == fh) {
+		omap_dispc_unregister_isr(omap_vout_isr);
+		vout->streaming = NULL;
+	}
+
+	if (vout->mmap_count != 0)
+		vout->mmap_count = 0;
+
+	vout->opened -= 1;
+	file->private_data = NULL;
+
+	if (vout->buffer_allocated)
+		videobuf_mmap_free(q);
+
+	kfree(fh);
+
+	/* need to remove the link when the either slave or master is gone */
+	spin_lock(&vout_link_lock);
+	if (vout_linked != -1)
+		vout_linked = -1;
+	spin_unlock(&vout_link_lock);
+
+	return r;
+}
+
+static int omap_vout_open(struct inode *inode, struct file *file)
+{
+	int minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	struct omap_vout_device *vout = NULL;
+	struct omap_vout_fh *fh;
+	struct videobuf_queue *q;
+
+	DPRINTK("entering\n");
+
+	if (saved_v1out && saved_v1out->vfd
+	    && (saved_v1out->vfd->minor == minor)) {
+		vout = saved_v1out;
+	}
+
+	if (vout == NULL) {
+		if (saved_v2out && saved_v2out->vfd
+		    && (saved_v2out->vfd->minor == minor)) {
+			vout = saved_v2out;
+		}
+	}
+
+	if (vout == NULL)
+		return -ENODEV;
+
+	/* for now, we only support single open */
+	if (vout->opened)
+		return -EBUSY;
+
+	vout->opened += 1;
+
+	fh = kmalloc(sizeof(*fh), GFP_KERNEL);
+	if (NULL == fh)
+		return -ENOMEM;
+	memset(fh, 0, sizeof(*fh));
+
+	file->private_data = fh;
+	fh->vout = vout;
+	fh->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+	q = &fh->vbq;
+	video_vbq_ops.buf_setup = omap_vout_buffer_setup;
+	video_vbq_ops.buf_prepare = omap_vout_buffer_prepare;
+	video_vbq_ops.buf_release = omap_vout_buffer_release;
+	video_vbq_ops.buf_queue = omap_vout_buffer_queue;
+	spin_lock_init(&vout->vbq_lock);
+
+	videobuf_queue_sg_init(q, &video_vbq_ops, NULL, &vout->vbq_lock,
+			       fh->type, V4L2_FIELD_NONE, sizeof
+			       (struct videobuf_buffer), fh);
+
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *fh,
+		struct v4l2_capability *cap)
+{
+	struct omap_vout_device *vout = ((struct omap_vout_fh *) fh)->vout;
+
+	memset(cap, 0, sizeof(*cap));
+	strncpy(cap->driver, VOUT_NAME,
+		sizeof(cap->driver));
+	strncpy(cap->card, vout->vfd->name, sizeof(cap->card));
+	cap->bus_info[0] = '\0';
+	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_OUTPUT;
+	return 0;
+}
+static int vidioc_enum_fmt_vid_out(struct file *file, void *fh,
+			struct v4l2_fmtdesc *fmt)
+{
+	int index = fmt->index;
+	enum v4l2_buf_type type = fmt->type;
+
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = index;
+	fmt->type = type;
+	if (index >= NUM_OUTPUT_FORMATS)
+		return -EINVAL;
+
+	fmt->flags = omap_formats[index].flags;
+	strncpy(fmt->description, omap_formats[index].description,
+			sizeof(fmt->description));
+	fmt->pixelformat = omap_formats[index].pixelformat;
+	return 0;
+}
+static int vidioc_g_fmt_vid_out(struct file *file, void *fh,
+			struct v4l2_format *f)
+{
+	struct omap_vout_device *vout = ((struct omap_vout_fh *) fh)->vout;
+
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	memset(pix, 0, sizeof(*pix));
+	*pix = vout->pix;
+	return 0;
+
+}
+
+static int vidioc_try_fmt_vid_out(struct file *file, void *fh,
+			struct v4l2_format *f)
+{
+	struct omap_vout_device *vout = ((struct omap_vout_fh *) fh)->vout;
+
+	if (vout->streaming)
+		return -EBUSY;
+
+	vout->fbuf.fmt.height = def_display->y_res;
+	vout->fbuf.fmt.width = def_display->x_res;
+
+	omap_vout_try_format(&f->fmt.pix, &vout->fbuf.fmt);
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
+			struct v4l2_format *f)
+{
+	struct omap_vout_fh *ofh = (struct omap_vout_fh *)fh;
+	struct omap_vout_device *vout = ofh->vout;
+	int bpp;
+	int r;
+
+	if (vout->streaming)
+		return -EBUSY;
+
+	if (down_interruptible(&vout->lock))
+		return -EINVAL;
+
+	/* get the framebuffer parameters */
+	vout->fbuf.fmt.height = def_display->y_res;
+	vout->fbuf.fmt.width = def_display->x_res;
+
+	/* change to samller size is OK */
+	bpp = omap_vout_try_format(&f->fmt.pix, &vout->fbuf.fmt);
+	f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
+
+	/* try & set the new output format */
+	vout->bpp = bpp;
+	vout->pix = f->fmt.pix;
+
+	/* set default crop and win */
+	omap_vout_new_format(&vout->pix, &vout->fbuf, &vout->crop, &vout->win);
+
+	/* Save the changes in the overlay strcuture */
+	r = omapvid_apply_changes(vout, 0, 0);
+		if (r)
+			printk(KERN_ERR VOUT_NAME "failed to change mode\n");
+
+	up(&vout->lock);
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *fh,
+			struct v4l2_requestbuffers *req)
+{
+	struct omap_vout_device *vout = ((struct omap_vout_fh *) fh)->vout;
+	struct videobuf_queue *q = &(((struct omap_vout_fh *) fh)->vbq);
+	unsigned int i, num_buffers = 0;
+	int ret = 0;
+	struct videobuf_dmabuf *dmabuf = NULL;
+
+	if (down_interruptible(&vout->lock))
+		return -EINVAL;
+	/* don't allow to buffer request for the linked layer */
+	if (vout->vid == vout_linked) {
+		up(&vout->lock);
+		return -EINVAL;
+	}
+
+	if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0)) {
+		up(&vout->lock);
+		return -EINVAL;
+	}
+	/* if memory is not mmp or userptr
+	   return error */
+	if ((V4L2_MEMORY_MMAP != req->memory) &&
+		(V4L2_MEMORY_USERPTR != req->memory)) {
+		up(&vout->lock);
+		return -EINVAL;
+	}
+
+	/* Cannot be requested when streaming is on */
+	if (vout->streaming) {
+		up(&vout->lock);
+		return -EBUSY;
+	}
+
+	/* If buffers are already allocated free them */
+	if (q->bufs[0] && (V4L2_MEMORY_MMAP == q->bufs[0]->memory)) {
+		if (vout->mmap_count) {
+			up(&vout->lock);
+			return -EBUSY;
+		}
+		num_buffers = (vout->vid == OMAP_VIDEO1) ?
+			video1_numbuffers : video2_numbuffers;
+		for (i = num_buffers; i < vout->buffer_allocated; i++) {
+			dmabuf = videobuf_to_dma(q->bufs[i]);
+			omap_vout_free_buffer((u32)dmabuf->vmalloc,
+				dmabuf->bus_addr, vout->buffer_size);
+			vout->buf_virt_addr[i] = 0;
+			vout->buf_phy_addr[i] = 0;
+		}
+		vout->buffer_allocated = num_buffers;
+		videobuf_mmap_free(q);
+	} else if (q->bufs[0] && (V4L2_MEMORY_USERPTR == q->bufs[0]->memory)) {
+		if (vout->buffer_allocated) {
+			videobuf_mmap_free(q);
+			for (i = 0; i < vout->buffer_allocated; i++) {
+				kfree(q->bufs[i]);
+				q->bufs[i] = NULL;
+			}
+			vout->buffer_allocated = 0;
+		}
+	}
+	((struct omap_vout_fh *) fh)->io_allowed = 1;
+
+	/*store the memory type in data structure */
+	vout->memory = req->memory;
+
+	INIT_LIST_HEAD(&vout->dma_queue);
+
+	/* call videobuf_reqbufs api */
+	ret = videobuf_reqbufs(q, req);
+	if (ret < 0) {
+		up(&vout->lock);
+		return ret;
+	}
+
+	vout->buffer_allocated = req->count;
+	for (i = 0; i < req->count; i++) {
+		dmabuf = videobuf_to_dma(q->bufs[i]);
+		dmabuf->vmalloc = (void *) vout->buf_virt_addr[i];
+		dmabuf->bus_addr = (dma_addr_t) vout->buf_phy_addr[i];
+		dmabuf->sglen = 1;
+	}
+	up(&vout->lock);
+	return 0;
+}
+static int vidioc_querybuf(struct file *file, void *fh,
+			struct v4l2_buffer *b)
+{
+	return videobuf_querybuf(&(((struct omap_vout_fh *) fh)->vbq), b);
+}
+static int vidioc_qbuf(struct file *file, void *fh,
+			struct v4l2_buffer *buffer)
+{
+	struct omap_vout_fh *ofh = (struct omap_vout_fh *)fh;
+	struct omap_vout_device *vout = ofh->vout;
+	struct videobuf_queue *q = &ofh->vbq;
+	int ret = 0;
+
+	if (!ofh->io_allowed)
+		return -EINVAL;
+
+	timeout = HZ / 5;
+	timeout += jiffies;
+
+	if ((V4L2_BUF_TYPE_VIDEO_OUTPUT != buffer->type) ||
+			(buffer->index >= vout->buffer_allocated) ||
+			(q->bufs[buffer->index]->memory != buffer->memory)) {
+		return -EINVAL;
+	}
+	if (V4L2_MEMORY_USERPTR == buffer->memory) {
+		if ((buffer->length < vout->pix.sizeimage) ||
+			(0 == buffer->m.userptr)) {
+			return -EINVAL;
+		}
+	}
+
+	ret = videobuf_qbuf(q, buffer);
+	return ret;
+}
+static int vidioc_dqbuf(struct file *file, void *fh,
+			struct v4l2_buffer *b)
+{
+	struct omap_vout_fh *ofh = (struct omap_vout_fh *)fh;
+	struct omap_vout_device *vout = ofh->vout;
+	struct videobuf_queue *q = &ofh->vbq;
+	int ret = 0;
+	/* don't allow to dequeue buffer for the linked layer */
+	if (vout->vid == vout_linked)
+		return -EINVAL;
+
+	if (!vout->streaming || !ofh->io_allowed)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		/* Call videobuf_dqbuf for non blocking mode */
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
+	else
+		/* Call videobuf_dqbuf for  blocking mode */
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+	return ret;
+}
+#define DISPC_IRQSTATUS_VSYNC                           (1 <<  1)
+static int vidioc_streamon(struct file *file, void *fh,
+			enum v4l2_buf_type i)
+{
+	struct omap_vout_fh *ofh = (struct omap_vout_fh *)fh;
+	struct omap_vout_device *vout = ofh->vout;
+	struct videobuf_queue *q = &ofh->vbq;
+	u32 addr = 0;
+	int r = 0;
+	int t;
+	struct omapvideo_info *ovid = &(vout->vid_info);
+	u32 mask = 0;
+
+	if (down_interruptible(&vout->lock))
+		return -EINVAL;
+	if (!ofh->io_allowed) {
+		up(&vout->lock);
+		return -EINVAL;
+	}
+
+	if (vout->streaming) {
+		up(&vout->lock);
+		return -EBUSY;
+	}
+
+	r = videobuf_streamon(q);
+	if (r < 0) {
+		up(&vout->lock);
+		return r;
+	}
+
+	if (list_empty(&vout->dma_queue)) {
+		up(&vout->lock);
+		return -EIO;
+	}
+	/* Get the next frame from the buffer queue */
+	vout->nextFrm = vout->curFrm = list_entry(vout->dma_queue.next,
+				struct videobuf_buffer, queue);
+	/* Remove buffer from the buffer queue */
+	list_del(&vout->curFrm->queue);
+	/* Mark state of the current frame to active */
+	vout->curFrm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	vout->field_id = 0;
+
+	/* set flag here. Next QBUF will start DMA */
+	vout->streaming = ofh;
+
+	vout->first_int = 1;
+
+	addr = (unsigned long) vout->queued_buf_addr[vout->curFrm->i] +
+		vout->cropped_offset;
+
+	mask = DISPC_IRQSTATUS_VSYNC;
+		r = omap_dispc_register_isr(omap_vout_isr, vout, mask);
+
+	for (t = 0; t < ovid->num_overlays; t++) {
+		struct omap_overlay *ovl = ovid->overlays[t];
+		if (ovl->manager && ovl->manager->display)
+			ovl->enable(ovl, 1);
+	}
+
+	r = omapvid_apply_changes(vout, addr, 0);
+	if (r)
+		printk(KERN_ERR VOUT_NAME "failed to change mode\n");
+
+	up(&vout->lock);
+	return 0;
+}
+static int vidioc_streamoff(struct file *file, void *fh,
+			enum v4l2_buf_type i)
+{
+
+	struct omap_vout_fh *ofh = (struct omap_vout_fh *)fh;
+	struct omap_vout_device *vout = ofh->vout;
+	int t, r = 0;
+	struct omapvideo_info *ovid = &(vout->vid_info);
+
+	if (!ofh->io_allowed)
+		return -EINVAL;
+	if (!vout->streaming)
+		return -EINVAL;
+	if (vout->streaming == fh) {
+		vout->streaming = NULL;
+
+		omap_dispc_unregister_isr(omap_vout_isr);
+
+		for (t = 0; t < ovid->num_overlays; t++) {
+			struct omap_overlay *ovl = ovid->overlays[t];
+			if (ovl->manager && ovl->manager->display)
+				ovl->enable(ovl, 0);
+		}
+
+		r = omapvid_apply_changes(vout, 0, 0);
+		if (r) {
+			printk(KERN_ERR VOUT_NAME "failed to change mode\n");
+			return r;
+		}
+	}
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops vout_ioctl_ops = {
+	.vidioc_querycap      			= vidioc_querycap,
+	.vidioc_querycap	 			= vidioc_querycap,
+	.vidioc_enum_fmt_vid_out 		= vidioc_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_out			= vidioc_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out			= vidioc_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out			= vidioc_s_fmt_vid_out,
+	.vidioc_reqbufs					= vidioc_reqbufs,
+	.vidioc_querybuf				= vidioc_querybuf,
+	.vidioc_qbuf					= vidioc_qbuf,
+	.vidioc_dqbuf					= vidioc_dqbuf,
+	.vidioc_streamon				= vidioc_streamon,
+	.vidioc_streamoff				= vidioc_streamoff,
+};
+
+static struct file_operations omap_vout_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.ioctl = video_ioctl2,
+	.mmap = omap_vout_mmap,
+	.open = omap_vout_open,
+	.release = omap_vout_release,
+};
+
+static int omap_vout_remove(struct platform_device *pdev)
+{
+
+	struct omap2video_device *vid_dev = platform_get_drvdata(pdev);
+	int k;
+
+	for (k = 0; k < pdev->num_resources; k++)
+		omap_vout_cleanup_device(vid_dev->vouts[k]);
+
+	for (k = 0; k < vid_dev->num_displays; k++) {
+		if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED)
+			vid_dev->displays[k]->disable(vid_dev->displays[k]);
+
+		omap_dss_put_display(vid_dev->displays[k]);
+	}
+	kfree(vid_dev);
+	return 0;
+}
+
+static int omap_vout_probe(struct platform_device *pdev)
+{
+	int r = 0, i, t;
+	struct omap2video_device *vid_dev = NULL;
+	struct omap_overlay *ovl;
+
+	if (pdev->num_resources == 0) {
+		dev_err(&pdev->dev, "probed for an unknown device\n");
+		r = -ENODEV;
+		return r;
+	}
+
+	vid_dev = kzalloc(sizeof(struct omap2video_device), GFP_KERNEL);
+	if (vid_dev == NULL) {
+		r = -ENOMEM;
+		return r;
+	}
+
+	platform_set_drvdata(pdev, vid_dev);
+
+	vid_dev->num_displays = 0;
+	t = omap_dss_get_num_displays();
+	for (i = 0; i < t; i++) {
+		struct omap_display *display;
+		display = omap_dss_get_display(i);
+		if (!display) {
+			dev_err(&pdev->dev, "probed for an unknown device\n");
+			r = -EINVAL;
+			goto error0;
+		}
+		vid_dev->displays[vid_dev->num_displays++] = display;
+	}
+
+	if (vid_dev->num_displays == 0) {
+		dev_err(&pdev->dev, "probed for an unknown device\n");
+		r = -EINVAL;
+		goto error0;
+	}
+
+	vid_dev->num_overlays = omap_dss_get_num_overlays();
+	for (i = 0; i < vid_dev->num_overlays; i++)
+		vid_dev->overlays[i] = omap_dss_get_overlay(i);
+
+	vid_dev->num_managers = omap_dss_get_num_overlay_managers();
+	for (i = 0; i < vid_dev->num_managers; i++)
+		vid_dev->managers[i] = omap_dss_get_overlay_manager(i);
+
+	/* video1 overlay should be the default one. find a display
+	 * connected to that, and use it as default display */
+	ovl = omap_dss_get_overlay(1);
+	if (ovl->manager && ovl->manager->display) {
+		def_display = ovl->manager->display;
+	} else {
+		dev_err(&pdev->dev, "probed for an unknown device\n");
+		r = -EINVAL;
+		goto error0;
+	}
+
+	r = omapvout_create_vout_devices(pdev);
+	if (r)
+		goto error0;
+
+	r = def_display->enable(def_display);
+	if (r) {
+		/* Here we are not considering a error as display may be
+		   enabled by frame buffer driver */
+		printk(KERN_WARNING "Display already enabled\n");
+	}
+
+	/* set the update mode */
+	if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
+		if (def_display->set_update_mode)
+			def_display->set_update_mode(def_display,
+					OMAP_DSS_UPDATE_AUTO);
+		if (def_display->enable_te)
+			def_display->enable_te(def_display, 1);
+#else
+		if (def_display->set_update_mode)
+			def_display->set_update_mode(def_display,
+					OMAP_DSS_UPDATE_MANUAL);
+		if (def_display->enable_te)
+			def_display->enable_te(def_display, 0);
+#endif
+	} else {
+		if (def_display->set_update_mode)
+			def_display->set_update_mode(def_display,
+					OMAP_DSS_UPDATE_AUTO);
+	}
+
+	for (i = 0; i < vid_dev->num_displays; i++) {
+		struct omap_display *display = vid_dev->displays[i];
+
+		if (display->update)
+			display->update(display,
+					0, 0,
+					display->x_res, display->y_res);
+	}
+	printk(KERN_INFO "display->updated\n");
+	return 0;
+
+error0:
+	kfree(vid_dev);
+	return r;
+}
+
+static int omapvout_create_vout_devices(struct platform_device *pdev)
+{
+	int r = 0, i, k;
+	struct omap_vout_device *vout;
+	struct video_device *vfd;
+	struct v4l2_pix_format *pix;
+	u32 numbuffers;
+	int index_i, index_j;
+	struct omap2video_device *vid_dev = platform_get_drvdata(pdev);
+
+	for (k = 0; k < pdev->num_resources; k++) {
+		vout = kmalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
+		if (!vout) {
+			printk(KERN_ERR VOUT_NAME ": could not allocate \
+					memory\n");
+			return -ENOMEM;
+		}
+
+		memset(vout, 0, sizeof(struct omap_vout_device));
+		vout->vid = k + 1;
+
+		/* set the default pix */
+		pix = &vout->pix;
+
+		/* Set the default picture of QVGA  */
+		pix->width = QQVGA_WIDTH;
+		pix->height = QQVGA_HEIGHT;
+
+		/* Default pixel format is RGB 5-6-5 */
+		pix->pixelformat = V4L2_PIX_FMT_RGB565;
+		pix->field = V4L2_FIELD_ANY;
+		pix->bytesperline = pix->width * 2;
+		pix->sizeimage = pix->bytesperline * pix->height;
+		pix->priv = 0;
+		pix->colorspace = V4L2_COLORSPACE_JPEG;
+
+		vout->bpp = RGB565_BPP;
+
+		vout->fbuf.fmt.width = def_display->x_res;
+		vout->fbuf.fmt.height = def_display->y_res;
+
+		omap_vout_new_format(pix, &vout->fbuf, &vout->crop, &vout->win);
+
+		/* initialize the video_device struct */
+		vfd = vout->vfd = video_device_alloc();
+
+		if (!vfd) {
+			printk(KERN_ERR VOUT_NAME ": could not allocate video \
+					device struct\n");
+			kfree(vout);
+			return -ENOMEM;
+		}
+		vfd->release = video_device_release;
+		vfd->ioctl_ops = &vout_ioctl_ops;
+
+		strncpy(vfd->name, VOUT_NAME, sizeof(vfd->name));
+		vfd->vfl_type = VID_TYPE_OVERLAY | VID_TYPE_CHROMAKEY;
+		/* need to register for a VID_HARDWARE_* ID in videodev.h */
+		vfd->fops = &omap_vout_fops;
+		video_set_drvdata(vfd, vout);
+		vfd->minor = -1;
+
+		index_i = 4;
+		index_j = 0;
+
+		numbuffers = (k == 0) ?
+			video1_numbuffers : video2_numbuffers;
+		vout->buffer_size = (k == 0) ?
+			video1_bufsize : video2_bufsize;
+		printk(KERN_INFO "Buffer Size = %d\n", vout->buffer_size);
+		for (i = 0; i < numbuffers; i++) {
+			vout->buf_virt_addr[i] =
+				omap_vout_alloc_buffer(vout->buffer_size,
+						(u32 *) &vout->buf_phy_addr[i]);
+			if (!vout->buf_virt_addr[i]) {
+				numbuffers = i;
+				goto error;
+			}
+		}
+
+		vout->suspended = 0;
+		init_waitqueue_head(&vout->suspend_wq);
+		init_MUTEX(&vout->lock);
+
+		if (video_register_device(vfd, VFL_TYPE_GRABBER, k) < 0) {
+			printk(KERN_ERR VOUT_NAME ": could not register \
+					Video for Linux device\n");
+			vfd->minor = -1;
+			goto error;
+		}
+
+		printk(KERN_INFO VOUT_NAME ": registered device video%d \
+				[v4l2]\n",
+				vfd->minor);
+
+		if (k == 0)
+			saved_v1out = vout;
+		else
+			saved_v2out = vout;
+
+		vid_dev->vouts[k] = vout;
+		vout->vid_info.vid_dev = vid_dev;
+		vout->vid_info.overlays[0] = vid_dev->overlays[k + 1];
+		vout->vid_info.num_overlays = 1;
+		vout->vid_info.id = k + 1;
+		vid_dev->num_videos++;
+
+		r = omapvid_apply_changes(vid_dev->vouts[k], 0, 1);
+
+		if (!r)
+			return 0;
+
+		printk(KERN_ERR VOUT_NAME ": could not register Video for \
+					Linux device\n");
+error:
+		for (i = 0; i < numbuffers; i++) {
+			omap_vout_free_buffer(vout->buf_virt_addr[i],
+					vout->buf_phy_addr[i],
+					vout->buffer_size);
+			vout->buf_virt_addr[i] = 0;
+			vout->buf_phy_addr[i] = 0;
+		}
+		video_device_release(vfd);
+		kfree(vout);
+		return r;
+	}
+	return -ENODEV;
+}
+
+int omapvid_apply_changes(struct omap_vout_device *vout, u32 addr, int init)
+{
+	int r = 0;
+	struct omapvideo_info *ovid = &(vout->vid_info);
+	struct omap_overlay *ovl;
+	int posx, posy;
+	int outw, outh;
+	int i;
+
+	for (i = 0; i < ovid->num_overlays; i++) {
+		ovl = ovid->overlays[i];
+
+		if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
+			outw = vout->win.w.width;
+			outh = vout->win.w.height;
+
+		} else {
+			outw = vout->win.w.width;
+			outh = vout->win.w.height;
+		}
+		if (init) {
+			posx = 0;
+			posy = 0;
+		} else {
+			posx = vout->win.w.left;
+			posy = vout->win.w.top;
+		}
+
+		r = omapvid_setup_overlay(vout, ovl, posx, posy, outw,
+				outh, addr);
+		if (r)
+			goto err;
+
+		/* disabled for now. if the display has changed, var
+		 * still contains the old timings. */
+#if 0
+		if (display && display->set_timings) {
+			struct omap_video_timings timings;
+			timings.pixel_clock = PICOS2KHZ(var->pixclock);
+			timings.hfp = var->left_margin;
+			timings.hbp = var->right_margin;
+			timings.vfp = var->upper_margin;
+			timings.vbp = var->lower_margin;
+			timings.hsw = var->hsync_len;
+			timings.vsw = var->vsync_len;
+
+			display->set_timings(display, &timings);
+		}
+#endif
+	if (!init && ovl->manager)
+			ovl->manager->apply(ovl->manager);
+
+	}
+	return 0;
+err:
+	printk("apply_changes failed\n");
+	return r;
+}
+
+int omapvid_setup_overlay(struct omap_vout_device *vout,
+		struct omap_overlay *ovl, int posx, int posy, int outw,
+		int outh, u32 addr)
+{
+	int r = 0;
+	enum omap_color_mode mode = 0;
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 &&
+			(outw != vout->pix.width || outh != vout->pix.height)) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	mode = video_mode_to_dss_mode(&(vout->pix));
+
+	if (mode == -EINVAL) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	r = ovl->setup_input(ovl, (u32)addr, (void *)addr, vout->pix.width,
+			vout->crop.width, vout->crop.height, mode);
+
+	if (r)
+		goto err;
+
+	r = ovl->setup_output(ovl, posx, posy, outw, outh);
+
+	if (r)
+		goto err;
+
+	return 0;
+
+err:
+	printk(KERN_WARNING "setup_overlay failed\n");
+	return r;
+}
+
+static enum omap_color_mode video_mode_to_dss_mode(struct v4l2_pix_format *pix)
+{
+	switch (pix->pixelformat) {
+
+	case 0:
+		break;
+	case V4L2_PIX_FMT_YUYV:
+		return OMAP_DSS_COLOR_YUV2;
+
+	case V4L2_PIX_FMT_UYVY:
+		return OMAP_DSS_COLOR_UYVY;
+
+	case V4L2_PIX_FMT_RGB565:
+		return OMAP_DSS_COLOR_RGB16;
+
+	case V4L2_PIX_FMT_RGB24:
+		return OMAP_DSS_COLOR_RGB24P;
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static struct platform_driver omap_vout_driver = {
+	.driver = {
+		   .name = VOUT_NAME,
+		   },
+	.probe = omap_vout_probe,
+	.remove = omap_vout_remove,
+};
+
+void
+omap_vout_isr(void *arg, unsigned int irqstatus)
+{
+	int r;
+
+	struct timeval timevalue;
+	struct omap_vout_device *vout =
+	    (struct omap_vout_device *) arg;
+	u32 addr;
+
+	if (!vout->streaming)
+		return;
+
+	spin_lock(&vout->vbq_lock);
+	do_gettimeofday(&timevalue);
+
+	if (!(irqstatus & DISPC_IRQSTATUS_VSYNC))
+		return;
+
+	if (!vout->first_int && (vout->curFrm != vout->nextFrm)) {
+		vout->curFrm->ts = timevalue;
+		vout->curFrm->state = VIDEOBUF_DONE;
+		wake_up_interruptible(&vout->curFrm->done);
+		vout->curFrm = vout->nextFrm;
+	}
+	vout->first_int = 0;
+	if (list_empty(&vout->dma_queue)) {
+		spin_unlock(&vout->vbq_lock);
+		return;
+	}
+
+	vout->nextFrm = list_entry(vout->dma_queue.next,
+				   struct videobuf_buffer, queue);
+	list_del(&vout->nextFrm->queue);
+
+	vout->nextFrm->state = VIDEOBUF_ACTIVE;
+
+	addr = (unsigned long) vout->queued_buf_addr[vout->nextFrm->i] +
+		    vout->cropped_offset;
+
+	r = omapvid_apply_changes(vout, addr, 0);
+	if (r)
+		printk(KERN_ERR VOUT_NAME "failed to change mode\n");
+	spin_unlock(&vout->vbq_lock);
+}
+
+static void omap_vout_cleanup_device(struct omap_vout_device *vout)
+{
+
+	struct video_device *vfd;
+	int i, numbuffers;
+
+	if (!vout)
+		return;
+	vfd = vout->vfd;
+
+	if (vfd) {
+		if (vfd->minor == -1) {
+			/*
+			 * The device was never registered, so release the
+			 * video_device struct directly.
+			 */
+			video_device_release(vfd);
+		} else {
+			/*
+			 * The unregister function will release the video_device
+			 * struct as well as unregistering it.
+			 */
+			video_unregister_device(vfd);
+		}
+	}
+
+	/* Allocate memory for the buffes */
+	numbuffers = (vout->vid) ?  video2_numbuffers : video1_numbuffers;
+	vout->buffer_size = (vout->vid) ? video2_bufsize : video1_bufsize;
+
+	for (i = 0; i < numbuffers; i++) {
+		omap_vout_free_buffer(vout->buf_virt_addr[i],
+			 vout->buf_phy_addr[i], vout->buffer_size);
+		vout->buf_phy_addr[i] = 0;
+		vout->buf_virt_addr[i] = 0;
+	}
+
+	kfree(vout);
+
+	if (!(vout->vid))
+		saved_v1out = NULL;
+	else
+		saved_v2out = NULL;
+}
+
+static int __init omap_vout_init(void)
+{
+
+	if (platform_driver_register(&omap_vout_driver) != 0) {
+		printk(KERN_ERR VOUT_NAME ": could not register \
+				Video driver\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void omap_vout_cleanup(void)
+{
+	platform_driver_unregister(&omap_vout_driver);
+}
+
+MODULE_AUTHOR("Texas Instruments.");
+MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
+MODULE_LICENSE("GPL");
+
+late_initcall(omap_vout_init);
+module_exit(omap_vout_cleanup);