# Re: \[RFC 2.6.26-rc9 1/5\] pxafb: add shared framebuffer interface

- From: Russell King - ARM Linux \<hidden\>
- Date: 2008-07-16 09:39:20 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2008/07/13458501
- Thread: https://ratatoskr.run/linux-fbdev/2008/07/13458485/t.md

```text
On Wed, Jul 16, 2008 at 01:59:42AM -0700, Jaya Kumar wrote:
> On Wed, Jul 16, 2008 at 12:00 AM, eric miao [ref] wrote:
> > On Sun, Jul 13, 2008 at 9:26 PM, Jaya Kumar [ref] wrote:
> >> These changes are to make it possible for a secondary driver to share the
> >> pxafb framebuffer. The changes include:
> >> - adding clkdev entry in pxafb_mach_info so that a driver can pass in the
> >>  correct struct device owner for the LCDCLK.
> >
> > Is it possible that LCDCLK being requested by device other than
> > pxa_device_fb?? Could you give an example and we may work out
> > a better solution.
> 
> You're right. I think LCDCLK is only ever requested by pxa_device_fb.
> 
> I see now that instead of doing:
> -       fbi->clk = clk_get(dev, "LCDCLK");
> +       fbi->clk = clk_get(inf->clkdev, "LCDCLK");
> 
> a better solution would be to directly use pxa_device_fb:
> -       fbi->clk = clk_get(dev, "LCDCLK");
> +       fbi->clk = clk_get(pxa_device_fb.dev, "LCDCLK");
> 
> and then I can avoid doing the clkdev ugliness.

PXA devices (intentionally) aren't exported.  Nor are they going to be,
so the above will fail if built as a module.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
```