# Re: \[RFC 2.6.26-rc9 2/5\] gumstix: conversion to MFP support and add bluetooth support

- From: eric miao \<hidden\>
- Date: 2008-07-16 07:13:03 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2008/07/13458498
- Thread: https://ratatoskr.run/linux-fbdev/2008/07/13458485/t.md

```text
On Wed, Jul 16, 2008 at 3:09 PM, Jaya Kumar [ref] wrote:
> On Tue, Jul 15, 2008 at 11:55 PM, eric miao [ref] wrote:
>> On Sun, Jul 13, 2008 at 9:26 PM, Jaya Kumar [ref] wrote:
>>> This patch converts gumstix over to the MFP configuration system and adds
>>> bluetooth support. Added a CLK_32K clock to enable bluetooth.
>>>
>>
>> The CLK_32KHz is assumed to be enabled always, so it's really not
>> necessary to create a struct clk for it. Please remove that from this
>> patch.
>>
>
> Hi Eric,
>
> Ok, I will take it out.
>
> To clarify, the bulk of gumstix's that have been shipped all come with
> U-boot 1.1.4 which does not turn it on by default and so my intention
> based on your previous feedback was basically: if CLK_32K not on, then
> warn the user, and then turn on the clk32k so that bluetooth works on
> such boards.
>

Then we should probably enable the 32K OSCC in the board init code
instead, maybe gumstix_init_32K() in gumstix_init(). Feel free to fire
another patch for this please, and leave enough comments.


> Thanks,
> jaya
>



-- 
Cheers
- eric

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
```