# Re: \[PATCH 1/5\] xen: Enable console tty by default in domU if it's not a dummy

- From: Andrew Morton \<akpm@linux-foundation.org\>
- Date: 2008-05-22 00:27:34 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2008/05/1103518
- Thread: https://ratatoskr.run/linux-input/2008/05/8909834/t.md

```text
On Wed, 21 May 2008 10:38:50 +0200
Markus Armbruster [ref] wrote:

> Without console= arguments on the kernel command line, the first
> console to register becomes enabled and the preferred console (the one
> behind /dev/console).  This is normally tty (assuming
> CONFIG_VT_CONSOLE is enabled, which it commonly is).
> 
> This is okay as long tty is a useful console.  But unless we have the
> PV framebuffer, and it is enabled for this domain, tty0 in domU is
> merely a dummy.  In that case, we want the preferred console to be the
> Xen console hvc0, and we want it without having to fiddle with the
> kernel command line.  Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7
> did that for us.
> 
> Since we now have the PV framebuffer, we want to enable and prefer tty
> again, but only when PVFB is enabled.  But even then we still want to
> enable the Xen console as well.
> 
> Problem: when tty registers, we can't yet know whether the PVFB is
> enabled.  By the time we can know (xenstore is up), the console setup
> game is over.
> 
> Solution: enable console tty by default, but keep hvc as the preferred
> console.  Change the preferred console to tty when PVFB probes
> successfully, unless we've been given console kernel parameters.

What a stunningly good changelog - I'd buy the tee-shirt.

Ack on the non-xen bits.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
```