# Re: fb layer \& ioremap\_wc

- List: linux-fbdev
- 3 messages, 2 authors
- Page: https://ratatoskr.run/linux-fbdev/2008/05/1096110/t

## Re: fb layer \& ioremap\_wc

- From: Jesse Barnes \<hidden\>
- Date: 2008-05-05 19:06:26 
- Message: https://ratatoskr.run/linux-fbdev/2008/05/1096110.md

```text
On Monday, May 05, 2008 11:59 am Frans Pop wrote:
> On Monday 05 May 2008, you wrote:
> > On Monday, May 05, 2008 10:32 am Frans Pop wrote:
> > > I suspect it could be vesafb/fbcon related instead. Normally I boot my
> > > system with 'quiet vga=791', i.e. with vesafb. I then see the
> > > artifacts.
> > >
> > > When I boot without 'vga=791', I hit another, unrelated regression
> > > (which I'll report separately) [1].
> > >
> > > When I boot with 'video=vfb:off', I do _not_ get the artifacts when X
> > > exits.
> >
> > Ahhh, I missed that part of your config.  That could definitely have an
> > effect on things...  You'll probably want something like the attached
>
> Not sure what to make of this.
> With your patch I still get the artifacts, but they are displayed a lot
> shorter. I get only a flash instead of a-2 seconds.

Hm, so I guess some other user is still using UC on the region.  [Note to fb 
list:  the patch just made vesafb use ioremap_wc instead of ioremap).

> > (there are other places in the fb layer that want similar treatment,
> > iirc, maybe fb_pgprotect?).
>
> Do you want to try a more complete review/patch or should this be punted
> over to the framebuffer folks?

Yeah, those bits have changed since I last looked at them, hopefully the fb 
guys can help.

Jesse
```

## Re: fb layer \& ioremap\_wc

- From: Frans Pop \<hidden\>
- Date: 2008-05-05 19:30:30 
- Message: https://ratatoskr.run/linux-fbdev/2008/05/13458126.md

```text
FYI

This is from a thread started on lkml about a regression with 2.6.26-rc1 
where artifacts are shown when X is exited if X86_PAT is enabled. 

The full thread can be seen here:
http://www.gossamer-threads.com/lists/linux/kernel/914812?do=post_view_threaded

The most relevant part starts here:
http://www.gossamer-threads.com/lists/linux/kernel/915956?do=post_view_threaded

On Monday 05 May 2008, Jesse Barnes wrote:
> On Monday, May 05, 2008 11:59 am Frans Pop wrote:
> > On Monday 05 May 2008, you wrote:
> > > On Monday, May 05, 2008 10:32 am Frans Pop wrote:
> > > > I suspect it could be vesafb/fbcon related instead. Normally I boot
> > > > my system with 'quiet vga=791', i.e. with vesafb. I then see the
> > > > artifacts.
> > > >
> > > > When I boot with 'video=vfb:off', I do _not_ get the artifacts when
> > > > X exits.
> > >
> > > Ahhh, I missed that part of your config.  That could definitely have
> > > an effect on things...  You'll probably want something like the
> > > attached
> >
> > Not sure what to make of this.
> > With your patch I still get the artifacts, but they are displayed a lot
> > shorter. I get only a flash instead of a-2 seconds.
>
> Hm, so I guess some other user is still using UC on the region.  [Note to
> fb list:  the patch just made vesafb use ioremap_wc instead of ioremap).
>
> > > (there are other places in the fb layer that want similar treatment,
> > > iirc, maybe fb_pgprotect?).
> >
> > Do you want to try a more complete review/patch or should this be
> > punted over to the framebuffer folks?
>
> Yeah, those bits have changed since I last looked at them, hopefully the
> fb guys can help.


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
```

## Re: fb layer \& ioremap\_wc

- From: Frans Pop \<hidden\>
- Date: 2008-06-13 16:42:43 
- Message: https://ratatoskr.run/linux-fbdev/2008/06/1112616.md

```text
On Monday 05 May 2008, Jesse Barnes wrote:
> On Monday, May 05, 2008 11:59 am Frans Pop wrote:
> > On Monday 05 May 2008, you wrote:
> > > On Monday, May 05, 2008 10:32 am Frans Pop wrote:
> > > > I suspect it could be vesafb/fbcon related instead. Normally I
> > > > boot my system with 'quiet vga=791', i.e. with vesafb. I then see
> > > > the artifacts.
> > > >
> > > > When I boot with 'video=vfb:off', I do _not_ get the artifacts
> > > > when X exits.
> > >
> > > Ahhh, I missed that part of your config.  That could definitely
> > > have an effect on things...  You'll probably want something like
> > > the attached
> >
> > Not sure what to make of this.
> > With your patch I still get the artifacts, but they are displayed a
> > lot shorter. I get only a flash instead of a-2 seconds.
>
> Hm, so I guess some other user is still using UC on the region.  [Note
> to fb list:  the patch just made vesafb use ioremap_wc instead of
> ioremap).

AFAIK there has been no progress on this issue, which is now listed on the 
regression list for .26 [1]. As there has been no response from any fb 
devs, is someone else maybe willing to have a closer look at this?

I'm still seeing the artifacts with -rc6 and the severity seems to depend 
on what was last displayed: sometimes the whole display is covered with 
colored nonsense, artistic maybe but not desired...

Cheers,
FJP

[1] http://bugzilla.kernel.org/show_bug.cgi?id=10843

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
```