[PATCH 12/20] cirrusfb: remove typedefs

@@ -110,7 +110,7 @@ #define MAX_NUM_BOARDS 7
  */
 
 /* board types */
-typedef enum {
+enum cirrus_board {
 	BT_NONE = 0,
 	BT_SD64,
 	BT_PICCOLO,

@@ -120,12 +120,12 @@ typedef enum {
 	BT_ALPINE,	/* GD543x/4x */
 	BT_GD5480,
 	BT_LAGUNA,	/* GD546x */
-} cirrusfb_board_t;
+};
 
 /*
  * per-board-type information, used for enumerating and abstracting
  * chip-specific information
- * NOTE: MUST be in the same order as cirrusfb_board_t in order to
+ * NOTE: MUST be in the same order as enum cirrus_board in order to
  * use direct indexing on this array
  * NOTE: '__initdata' cannot be used as some of this info
  * is required at runtime.  Maybe separate into an init-only and

@@ -361,10 +361,10 @@ struct cirrusfb_regs {
 };
 
 #ifdef CIRRUSFB_DEBUG
-typedef enum {
+enum cirrusfb_dbg_reg_class {
 	CRT,
 	SEQ
-} cirrusfb_dbg_reg_class_t;
+};
 #endif		/* CIRRUSFB_DEBUG */
 
 /* info about board */

@@ -375,7 +375,7 @@ struct cirrusfb_info {
 	u8 __iomem *regbase;
 	u8 __iomem *mem;
 	unsigned long size;
-	cirrusfb_board_t btype;
+	enum cirrus_board btype;
 	unsigned char SFR;	/* Shadow of special function register */
 
 	unsigned long fbmem_phys;

@@ -571,7 +571,7 @@ #ifdef CIRRUSFB_DEBUG
 static void cirrusfb_dump(void);
 static void cirrusfb_dbg_reg_dump(caddr_t regbase);
 static void cirrusfb_dbg_print_regs(caddr_t regbase,
-				    cirrusfb_dbg_reg_class_t reg_class, ...);
+				    enum cirrusfb_dbg_reg_class reg_class, ...);
 static void cirrusfb_dbg_print_byte(const char *name, unsigned char val);
 #endif /* CIRRUSFB_DEBUG */
 

@@ -2449,7 +2449,7 @@ static int cirrusfb_register(struct cirr
 {
 	struct fb_info *info;
 	int err;
-	cirrusfb_board_t btype;
+	enum cirrus_board btype;
 
 	DPRINTK("ENTER\n");
 

@@ -2517,7 +2517,7 @@ static int cirrusfb_pci_register(struct 
 {
 	struct cirrusfb_info *cinfo;
 	struct fb_info *info;
-	cirrusfb_board_t btype;
+	enum cirrus_board btype;
 	unsigned long board_addr, board_size;
 	int ret;
 

@@ -2537,11 +2537,11 @@ static int cirrusfb_pci_register(struct 
 	cinfo = info->par;
 	cinfo->info = info;
 	cinfo->pdev = pdev;
-	cinfo->btype = btype = (cirrusfb_board_t) ent->driver_data;
+	cinfo->btype = btype = (enum cirrus_board) ent->driver_data;
 
-	DPRINTK(" Found PCI device, base address 0 is 0x%lx, btype set to %d\n",
+	DPRINTK(" Found PCI device, base address 0 is 0x%x, btype set to %d\n",
 		pdev->resource[0].start, btype);
-	DPRINTK(" base address 1 is 0x%lx\n", pdev->resource[1].start);
+	DPRINTK(" base address 1 is 0x%x\n", pdev->resource[1].start);
 
 	if (isPReP) {
 		pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, 0x00000000);

@@ -2647,7 +2647,7 @@ static int cirrusfb_zorro_register(struc
 {
 	struct cirrusfb_info *cinfo;
 	struct fb_info *info;
-	cirrusfb_board_t btype;
+	enum cirrus_board btype;
 	struct zorro_dev *z2 = NULL;
 	unsigned long board_addr, board_size, size;
 	int ret;

@@ -3353,7 +3353,7 @@ void cirrusfb_dbg_print_byte(const char 
 
 static
 void cirrusfb_dbg_print_regs(caddr_t regbase,
-			     cirrusfb_dbg_reg_class_t reg_class, ...)
+			     enum cirrusfb_dbg_reg_class reg_class, ...)
 {
 	va_list list;
 	unsigned char val = 0;


-------------------------------------------------------------------------