[PATCH 10/20] s3c2410fb: make use of default_display settings
DORMANTno replies
From: "Antonino A. Daplas" <adaplas@gmail.com>
Date: 2007-08-26 14:23:53
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, framebuffer layer, the rest · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Helge Deller, Linus Torvalds
From: Krzysztof Helt <redacted> This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings. This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT). Signed-off-by: Krzysztof Helt <redacted> Signed-off-by: Antonino Daplas <adaplas@gmail.com> --- drivers/video/s3c2410fb.c | 25 +++++++++++++++++-------- 1 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index b2ba7a0..98da79c 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c@@ -172,19 +172,28 @@ static int s3c2410fb_check_var(struct fb struct s3c2410fb_info *fbi = info->par; struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data; struct s3c2410fb_display *display = NULL; + struct s3c2410fb_display *default_display = mach_info->displays + + mach_info->default_display; + int type = default_display->type; unsigned i; dprintk("check_var(var=%p, info=%p)\n", var, info); /* validate x/y resolution */ - - for (i = 0; i < mach_info->num_displays; i++) - if (var->yres == mach_info->displays[i].yres && - var->xres == mach_info->displays[i].xres && - var->bits_per_pixel == mach_info->displays[i].bpp) { - display = mach_info->displays + i; - break; - } + /* choose default mode if possible */ + if (var->yres == default_display->yres && + var->xres == default_display->xres && + var->bits_per_pixel == default_display->bpp) + display = default_display; + else + for (i = 0; i < mach_info->num_displays; i++) + if (type == mach_info->displays[i].type && + var->yres == mach_info->displays[i].yres && + var->xres == mach_info->displays[i].xres && + var->bits_per_pixel == mach_info->displays[i].bpp) { + display = mach_info->displays + i; + break; + } if (!display) { dprintk("wrong resolution or depth %dx%d at %d bpp\n", -------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/