[PATCH] Clean up of sparc FB options

From: Krzysztof Helt <redacted>

This patch puts all SBUS/UPA selection under one option "SBUS/UPA 
framebuffers" and moves all sparc specific drivers next to them 
in one group.

Signed-off-by: Krzysztof Helt <redacted>

---

--- linux-2.6.21.orig/drivers/video/Kconfig	2007-05-09 16:56:

07.204702359 +0200

+++ linux-2.6.21/drivers/video/Kconfig	2007-05-10 18:09:09.

478548219 +0200

@@ -703,6 +703,91 @@ config FB_CG6
 	  This is the frame buffer device driver for the CGsix (GX, 

TurboGX)
 	  frame buffer.
 
+config FB_FFB
+	bool "Creator/Creator3D/Elite3D support"
+	depends on FB_SBUS && SPARC64
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Creator, 
Creator3D,
+	  and Elite3D graphics boards.
+
+config FB_TCX
+	bool "TCX (SS4/SS5 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the TCX 24/8bit 
frame
+	  buffer.
+
+config FB_CG14
+	bool "CGfourteen (SX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGfourteen 
frame
+	  buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+	bool "P9100 (Sparcbook 3 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the P9100 card
+	  supported on Sparcbook 3 machines.
+
+config FB_LEO
+	bool "Leo (ZX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the SBUS-based 
Sun ZX
+	  (leo) frame buffer cards.
+
+config FB_IGA
+	bool "IGA 168x display support"
+	depends on FB && SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the INTERGRAPHICS 1680 
and
+	  successor frame buffer cards.
+
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and 
similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The 
driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and 
similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The 
driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
 config FB_PVR2
 	tristate "NEC PowerVR 2 display support"
 	depends on FB && SH_DREAMCAST

@@ -1169,7 +1254,7 @@ config FB_ATY
 config FB_ATY_CT
 	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
 	depends on PCI && FB_ATY
-	default y if SPARC64 && FB_PCI
+	default y if SPARC64 && PCI
 	help
 	  Say Y here to support use of ATI's 64-bit Rage boards (or 

other
 	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as 
a

@@ -1427,95 +1512,6 @@ config FB_AU1200
 
 source "drivers/video/geode/Kconfig"
 
-config FB_FFB
-	bool "Creator/Creator3D/Elite3D support"
-	depends on FB_SBUS && SPARC64
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Creator, 

Creator3D,
-	  and Elite3D graphics boards.
-
-config FB_TCX
-	bool "TCX (SS4/SS5 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the TCX 24/8bit 
frame
-	  buffer.
-
-config FB_CG14
-	bool "CGfourteen (SX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGfourteen 
frame
-	  buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
-	bool "P9100 (Sparcbook 3 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the P9100 card
-	  supported on Sparcbook 3 machines.
-
-config FB_LEO
-	bool "Leo (ZX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the SBUS-based 
Sun ZX
-	  (leo) frame buffer cards.
-
-config FB_XVR500
-	bool "Sun XVR-500 3DLABS Wildcat support"
-	depends on FB && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-500 and 
similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The 
driver
-	  only works on sparc64 systems where the system firwmare has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR2500
-	bool "Sun XVR-2500 3DLABS Wildcat support"
-	depends on FB && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-2500 and 
similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The 
driver
-	  only works on sparc64 systems where the system firwmare has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_PCI
-	bool "PCI framebuffers"
-	depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
-	bool "IGA 168x display support"
-	depends on SPARC32 && FB_PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the INTERGRAPHICS 1680 
and
-	  successor frame buffer cards.
-
 config FB_HIT
 	tristate "HD64461 Frame Buffer support"
 	depends on FB && HD64461


----------------------------------------------------
Bebe Lilly - "Mój świat". Ta płyta rozbawi Twoje dziecko!
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fbebe.html&sid=1135