# Re: 2.6.19-rc5: Geode GX frame buffer takes 13 seconds to initialize

- From: James Simmons \<hidden\>
- Date: 2006-11-27 18:21:36 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2006/11/13456749
- Thread: https://ratatoskr.run/linux-fbdev/2006/11/13456721/t.md

```text

> Hi Jordan,
> 
> > > Author: Jordan Crouse [ref]
> > > Date:   Mon May 15 20:54:51 2006 -0600
> > >
> > >     FB: Get the Geode GX frambuffer size from the BIOS
> > >
> > >     Use the Geode GX BIOS virtual registers to get the actual size of the
> > >     framebuffer.
> > >
> > >     Signed-off-by: Jordan Crouse [ref]
> 
> The patch works. The frame buffer size now matches what is really there (4
> MB).
> 
> Out of curiosity, where are the magic registers (0xAC1C, 0xAC1E) documented?
> I searched "AMD Geode GX Processors Data Book", but had no luck...
> 
> Also, I notice that the pci_resource_len() shows 16 MB, even though
> the resource should only cover 4 MB.  I assume this is a BIOS bug...
> =)
> 
> Is there anything I can do to help get this pushed into the 2.6.19 kernel?

Jordan can you repost the patch and CC andrew morton with it so the patch 
will be in the -mm tree. Thank you.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
```
