# Re: 2.6.19-rc5: Geode GX frame buffer takes 13 seconds to initialize

- From: James Simmons \<hidden\>
- Date: 2006-11-20 16:35:06 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2006/11/13456733
- Thread: https://ratatoskr.run/linux-fbdev/2006/11/13456721/t.md

```text

> Hi all,
> 
> I'm using the Geode GX processor and the associated frame buffer
> driver in 2.6.19-rc5.
> I have a 640x480 LCD attached, without DDC support (not sure if that matters).
> 
> The frame buffer driver takes 12.5 seconds to initialize.
> 
> Is this normal?
> 
> Relevant kernel log:
> [   18.516093] io scheduler deadline registered (default)
> [   18.539818] gxfb 0000:00:01.1: 16384 Kibyte of video memory at 0x41000000
> [   31.052135] Console: switching to colour frame buffer device 80x30
> [   31.070906] fb0: Geode GX frame buffer device
> [   31.094200] Real Time Clock Driver v1.12ac
> 
> I tried building the driver as a module, but that makes no difference
> -- modprobe 'hangs' for 13 seconds.
> 
> I looked through the Geode driver code and didn't see anything obvious
> that would eat up 13 seconds.
> 
> Any idea as to what is going on?

No idea. I do have hardware with this chipset altho I don't have a 2.6.X 
kernel running on it. So I will see what the problem is in the next few 
weeks.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
```
