# Re: pm2 driver

- From: Jim Hague \<hidden\>
- Date: 2005-10-05 12:38:59 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2005/10/13455540
- Thread: https://ratatoskr.run/linux-fbdev/2005/09/13455517/t.md

```text
On Tuesday 27 September 2005 19:46, Peter 'p2' De Schrijver wrote:
> Attached is a small patch which configures the correct memory clock and
> timings on the Elsa Winner 2000 Office pm2 based card. This is necessary
> when the card is used on a platform which does not support PC style BIOS
> initialization.

Thanks for that, Peter - and sorry for the delay in getting back to you. I've 
been away from home for work purposes, and am just now catching up on back 
emails.

I am curious about one thing. The initial mem control, mem config etc. values 
that you check for - I assume they are what you observe on your hardware. 
Will they be the same on other hardware, do you know? I must check my TVP4020 
docs...

How would you feel if instead I added a driver parameter to force 
initialisation instead of looking for particular initial values?

Out of interest, what have you got the card plugged into?
-- 
Jim Hague - jim.hague@acm.org          Never trust a computer you can't lift.


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
```
