Fwd: linux-kernel radeonfb: Display corruption with power managment, after a while it goes away automatically
From: Tony Daplas <hidden>
Date: 2005-03-17 23:45:51
--- Sebastian <sebastian_ml@gmx.net> wrote:
Date: Thu, 17 Mar 2005 23:07:14 +0100 From: Sebastian <redacted> To: adaplas@hotpop.com Subject: linux-kernel radeonfb: Display corruption with power managment, after a while it goes away automatically Hello! I have a desktop computer with a radeon 9250 agp card from connect3d. I append radeonfb.default_dynclk=1 when loading the kernel or use options radeonfb default.dynclk=1 when using modules. I understand the power managment feature is mostly for mobility cards for laptops, but I like it very much because my card stays much cooler with it. The problem is that, no matter if I load the module or build it statically in the kernel the screen gets garbled until init says it's "Setting user font". After setting the user fonts (exactly at this point everytime) everything at once is in order. And powermanagment works flawlessly. I don't get the point why this should have anything to do with setting user fonts (which are set to lat0-16 btw.). I'm on Gentoo kernel 2.6.11. I can't tell how this works with earlier versions, because the card is only a few days old. But if you like I could check it out. cat /proc/version Linux version 2.6.11.2 (root@hal9000) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #3 Thu Mar 17 21:38:23 CET 2005 /usr/src/linux/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux hal9000 2.6.11.2 #3 Thu Mar 17 21:38:23 CET 2005 i686 AMD Athlon(tm) XP 1700+ AuthenticAMD GNU/Linux Gnu C 3.3.5 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12i mount 2.12i module-init-tools 3.0 e2fsprogs 1.35 reiserfsprogs line reiser4progs line xfsprogs 2.6.25 Linux C Library 2.3.4 Dynamic linker (ldd) 2.3.4 Procps 3.2.4 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 045 Modules Loaded dvb_ttpci dvb_core saa7146_vv video_buf saa7146 ves1820 stv0299 tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom radeonfb cfbcopyarea cfbimgblt cfbfillrect lirc_serial lirc_dev cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 1700+ stepping : 1 cpu MHz : 1469.873 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow bogomips : 2899.96 cat /proc/modules dvb_ttpci 90856 18 - Live 0xe1981000 dvb_core 75816 1 dvb_ttpci, Live 0xe094f000 saa7146_vv 45376 1 dvb_ttpci, Live 0xe092b000 video_buf 17092 1 saa7146_vv, Live 0xe0910000 saa7146 15204 2 dvb_ttpci,saa7146_vv, Live 0xe0916000 ves1820 5508 1 dvb_ttpci, Live 0xe090d000 stv0299 9668 1 dvb_ttpci, Live 0xe08e5000 tda8083 5700 1 dvb_ttpci, Live 0xe08ed000 stv0297 8576 1 dvb_ttpci, Live 0xe08e9000 sp8870 7180 1 dvb_ttpci, Live 0xe08dd000 ves1x93 6340 1 dvb_ttpci, Live 0xe0816000 ttpci_eeprom 2304 1 dvb_ttpci, Live 0xe083d000 radeonfb 61252 1 - Live 0xe08f1000 cfbcopyarea 3712 1 radeonfb, Live 0xe083b000 cfbimgblt 2752 1 radeonfb, Live 0xe0839000 cfbfillrect 3392 1 radeonfb, Live 0xe081d000 lirc_serial 11488 1 - Live 0xe0835000 lirc_dev 11532 1 lirc_serial, Live 0xe0831000 cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : lirc_serial 0cf8-0cff : PCI conf1 4000-407f : motherboard 4000-4003 : PM1a_EVT_BLK 4004-4005 : PM1a_CNT_BLK 4008-400b : PM_TMR 4020-4027 : GPE0_BLK 4080-40ff : motherboard 4200-427f : motherboard 4280-42ff : motherboard 4400-447f : motherboard 4480-44ff : motherboard 44a0-44af : GPE1_BLK 5000-503f : motherboard 5100-513f : motherboard d000-dfff : PCI Bus #02 d000-d0ff : 0000:02:00.0 d000-d0ff : radeonfb e000-e007 : 0000:00:04.0 e000-e007 : forcedeth ec00-ec1f : 0000:00:01.1 f000-f00f : 0000:00:09.0 f000-f007 : ide0 f008-f00f : ide1 cat /proc/iomem 00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000ccfff : Video ROM 000d0000-000d17ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-1ffeffff : System RAM 00100000-0033a4e9 : Kernel code 0033a4ea-004102ff : Kernel data 1fff0000-1fff2fff : ACPI Non-volatile Storage 1fff3000-1fffffff : ACPI Tables d0000000-dfffffff : PCI Bus #02 d0000000-dfffffff : 0000:02:00.0 d0000000-dfffffff : radeonfb e0000000-e1ffffff : 0000:00:00.0 e2000000-e3ffffff : PCI Bus #02 e3000000-e300ffff : 0000:02:00.0 e3000000-e300ffff : radeonfb e4000000-e4ffffff : PCI Bus #01 e4000000-e40001ff : 0000:01:09.0 e4000000-e40001ff : saa7146 e5000000-e5000fff : 0000:00:04.0 e5000000-e5000fff : forcedeth e5002000-e5002fff : 0000:00:02.0 e5002000-e5002fff : ohci_hcd e5003000-e5003fff : 0000:00:02.1 e5003000-e5003fff : ohci_hcd e5004000-e50040ff : 0000:00:02.2 e5004000-e50040ff : ehci_hcd fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved cat /proc/fb 0 ATI Radeon Y` dmesg: dmesg Linux version 2.6.11.2 (root@hal9000) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #3 Thu Mar 17 21:38:23 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6fa0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7880 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=gentoo ro root=303 radeonfb.default_dynclk=1 elevator=deadline Unknown boot option `radeonfb.default_dynclk=1': ignoring mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1469.873 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515168k/524224k available (2281k kernel code, 8504k reserved, 855k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2899.96 BogoMIPS (lpj=1449984) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1700+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Machine check exception polling timer started. SGI XFS with no debug enabled ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 32M @ 0xe0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 [drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler deadline registered (default) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 01297:0531 bound to 0000:00:04.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky [off-list ref] Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SV1604N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 21 (level, high) -> IRQ 21 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 21, pci mem 0xe5004000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, high) -> IRQ 20 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 20, pci mem 0xe5002000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 22, pci mem 0xe5003000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-2: new full speed USB device using ohci_hcd and address 3 usb 2-3: new full speed USB device using ohci_hcd and address 4 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6104 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1 input: USB HID v1.00 Device [USB Audio] on usb-0000:00:02.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-3: new low speed USB device using ohci_hcd and address 3 Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). input: USB HID v1.00 Keyboard [046a:0001] on usb-0000:00:02.1-3 usbcore: registered new driver snd-usb-audio ALSA device list: #0: USB Audio at usb-0000:00:02.0-2, full speed NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 172 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 156k freed Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 lirc_dev: IR Remote Control driver registered, at major 61 lirc_serial: auto-detected active low receiver lirc_dev: lirc_register_plugin:sample_rate: 0 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb: Dynamic Clock Power Management enabled radeonfb (0000:02:00.0): ATI Radeon Y` XFS mounting filesystem hda1 Ending clean XFS mount for filesystem: hda1 XFS mounting filesystem hda4 Ending clean XFS mount for filesystem: hda4 saa7146: register extension 'dvb'. ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17 saa7146: found saa7146 @ mem e091c000 (revision 1, irq 17) (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X). adapter has MAC addr = 00:d0:5c:03:2a:84 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... dvb-ttpci: found av7110-0. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: X passes broken AGP3 flags (1f00420f). Fixed. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [drm] Loading R200 Microcode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: X passes broken AGP3 flags (1f00420f). Fixed. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [drm] Loading R200 Microcode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: X passes broken AGP3 flags (1f00420f). Fixed. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [drm] Loading R200 Microcode lspci -vvv 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) Capabilities: [40] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [60] #08 [2001] 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1] 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at ec00 Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at e5002000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at e5003000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 21 Region 0: Memory at e5004000 (32-bit, non-prefetchable) Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at e5000000 (32-bit, non-prefetchable) Region 1: I/O ports at e000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e4000000-e4ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 0531 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=mediumquoted
TAbort- <TAbort- <MAbort- >SERR- <PERR-Latency: 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e2000000-e3ffffff Prefetchable memory behind bridge: d0000000-dfffffff Expansion ROM at 0000d000 [disabled] [size=4K] BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Siemens/Technotrend/Hauppauge DVB card rev1.3 or rev1.5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=mediumquoted
TAbort- <TAbort- <MAbort- >SERR- <PERR-Latency: 32 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at e4000000 (32-bit, non-prefetchable) 0000:02:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA]) Subsystem: Connect Components Ltd: Unknown device 2801 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=mediumquoted
TAbort- <TAbort- <MAbort- >SERR- <PERR-Latency: 32 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0000000 (32-bit, prefetchable) Region 1: I/O ports at d000 [size=256] Region 2: Memory at e3000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Thank you very much! Sebastian
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click