# Re: Problem: how to sequence reset of PCI hardware

- From: Jeff Garzik \<hidden\>
- Date: 2005-02-21 17:02:50 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2005/02/712627
- Thread: https://ratatoskr.run/lkml/2005/02/712544/t.md

```text
Jon Smirl wrote:
> On Mon, 21 Feb 2005 03:37:45 -0500, Jeff Garzik [ref] wrote:
>
>>You either need to execute the video BIOS to initialize the hardware
>>registers, or initialize the hardware registers themselves.
>
>
> That is what the user mode reset program does.
>
> The problem is, how do I get it to run before calling the device's
> probe function? Most of the framebuffer drivers assume that the
> hardware has already been reset in their probe code.

<shrug>  You do precisely what you just said:  run it before the device's probe function.

That typically means either initramfs addition or using 'install <module> command...' in /etc/modprobe.conf.

	Jeff
```
