Fw: device mapper & cryptsetup error and intelfb

2 messages, 2 authors, 2005-01-05 · open the first message on its own page

Fw: device mapper & cryptsetup error and intelfb

From: Andrew Morton <hidden>
Date: 2005-01-05 01:52:19

intelfb glitch...


Begin forwarded message:

Date: Wed, 29 Dec 2004 17:52:34 +0100
From: Mateusz Berezecki <redacted>
To: Linux Kernel Mailing List <redacted>
Subject: device mapper & cryptsetup error and   intelfb


1)
Dec 29 17:42:41 localhost kernel: device-mapper: crypt: Error allocating 
crypto tfm
Dec 29 17:42:42 localhost kernel: device-mapper: error adding target to 
table
Dec 29 17:42:47 localhost udev[18896]: removing device node '/dev/dm-0'

invoked with command:

losetup /dev/loop0 /home/mb/fs1&&cryptsetup create crloop /dev/loop0 && 
mount /dev/mapper/crloop /media/crypted

2)

i also get a plenty of  such messages

intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 488, 0
intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 792, 80
intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 184, 752

Is it normal behaviour ?


hardware info:

0000:00:02.0 VGA compatible controller: Intel Corp. 
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
thats from lspci
and lspci -v

0000:00:02.0 VGA compatible controller: Intel Corp. 
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 
(prog-if 00 [VGA])
        Subsystem: Dell: Unknown device 0149
        Flags: bus master, fast devsel, latency 0, IRQ 11
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Memory at f6f80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [d0] Power Management version 1

Maybe this helps.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

Re: Fw: device mapper & cryptsetup error and intelfb

From: Sylvain Meyer <hidden>
Date: 2005-01-05 16:50:50

   Hi,

   I will only answer the intelfb problem. Are you using X ? I had problems with the cursor and X, so i did a trick to restore the hw cursor after an X session. And it's the messages you are seeing. Have you always a good cursor, if yes the trick works and all is ok !

Sylvain

Andrew Morton a écrit:
intelfb glitch...


Begin forwarded message:

Date: Wed, 29 Dec 2004 17:52:34 +0100
From: Mateusz Berezecki <redacted>
To: Linux Kernel Mailing List <redacted>
Subject: device mapper & cryptsetup error and   intelfb


1)
Dec 29 17:42:41 localhost kernel: device-mapper: crypt: Error allocating crypto tfm
Dec 29 17:42:42 localhost kernel: device-mapper: error adding target to table
Dec 29 17:42:47 localhost udev[18896]: removing device node '/dev/dm-0'

invoked with command:

losetup /dev/loop0 /home/mb/fs1&&cryptsetup create crloop /dev/loop0 && mount /dev/mapper/crloop /media/crypted

2)

i also get a plenty of  such messages

intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 488, 0
intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 792, 80
intelfb: intelfb_check_var: accel_flags is 1
intelfb: the cursor was killed - restore it !!
intelfb: size 8, 16   pos 184, 752

Is it normal behaviour ?


hardware info:

0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
thats from lspci
and lspci -v

0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA])
       Subsystem: Dell: Unknown device 0149
       Flags: bus master, fast devsel, latency 0, IRQ 11
       Memory at e0000000 (32-bit, prefetchable) [size=128M]
       Memory at f6f80000 (32-bit, non-prefetchable) [size=512K]
       Capabilities: [d0] Power Management version 1

Maybe this helps.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel

 




-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help