Hi
I have a sun blade 100 with 1 onboard PGX64 and 1 pci card PGX64 (both
Ati mach64 cards).
With linux 2.4 series, both framebuffers worked, and XFree86 worked on
both cards.
With 2.6.X (X <= 7), only the primary (onboard) card worked ; secondary
was always black in console and in XFree86.
Starting with 2.6.8-rc1, the console works on both cards again, however,
XFree86 doesn't work anymore. It crashes with signal 11 even before it
can display it's famous black & white dot pattern.
I've tried 2.6.8-rc4 on a sun ultra 5 with only 1 onboard PGX24 (Ati
mach64 card) and XFree86 works fine there, so I guess the problem is due
to the secondary card. I don't know which is at fault here (if it's the
kernel or X), but as the problem was introduced with 2.6.8-rc1, I'm
asking here.
Does anyone have any idea?
Regards
Admar Schoonen
PS: please CC any replies to me, as I'm not on this list
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
On Saturday 14 August 2004 21:54, Admar Schoonen wrote:
Hi
I have a sun blade 100 with 1 onboard PGX64 and 1 pci card PGX64 (both
Ati mach64 cards).
With linux 2.4 series, both framebuffers worked, and XFree86 worked on
both cards.
With 2.6.X (X <= 7), only the primary (onboard) card worked ; secondary
was always black in console and in XFree86.
con2fb was broken before that version.
Starting with 2.6.8-rc1, the console works on both cards again, however,
XFree86 doesn't work anymore. It crashes with signal 11 even before it
can display it's famous black & white dot pattern.
I tried with 1 PCI and 1 AGP nVidia card, PCI is primary. I use vesafb on the
primary, and I have no problems launching X on the secondary. If I initialize
the secondary card's ROM-BIOS, I can also modprobe rivafb and launch X-fbdev on
both the primary and secondary.
I cannot use rivafb for both because of conflicts.
Tony
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
On Wed, Sep 15, 2004 at 05:21:45AM +0800, Antonino A. Daplas wrote:
quoted
With 2.6.X (X <= 7), only the primary (onboard) card worked ; secondary
was always black in console and in XFree86.
con2fb was broken before that version.
I doubt that the problem is con2fbmap. con2fbmap works fine with 2.4.x
and 2.6.8-rcX (I guess 2.6.8 will work fine too).
quoted
Starting with 2.6.8-rc1, the console works on both cards again, however,
XFree86 doesn't work anymore. It crashes with signal 11 even before it
can display it's famous black & white dot pattern.
I tried with 1 PCI and 1 AGP nVidia card, PCI is primary. I use vesafb on the
primary, and I have no problems launching X on the secondary. If I initialize
the secondary card's ROM-BIOS, I can also modprobe rivafb and launch X-fbdev on
both the primary and secondary.
I cannot use rivafb for both because of conflicts.
I guess my problem is Ati (Mach64 only?) and/or sparc (sparc64 only?)
related. I haven't tested X-fbdev.
Admar
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285