[PATCH] 2.5.59 for ATI Mach64(port from Daniel code for 2.5.59)
From: Alexander Kern <hidden>
Date: 2003-01-17 21:28:15
Hi, tested with ATI RAGE 3D MOBILITY M1 (P/M). 1400x1050 works, i assume all others must work too.
[PATCH] 2.5.59 for ATI Mach64(port from Daniel code for 2.5.59)
STALE8611d
3 messages, 2 authors, 2003-01-24 · open the first message on its own page
Re: [PATCH] 2.5.59 for ATI Mach64(port from Daniel code for 2.5.59)
From: Alexander Kern <hidden>
Date: 2003-01-18 11:02:07
Am Freitag, 17. Januar 2003 22:27 schrieb Alexander Kern:
Hi, tested with ATI RAGE 3D MOBILITY M1 (P/M). 1400x1050 works, i assume all others must work too.
Arrrrh, full speed back. Please don't beat me, it works only with 1400x1050 on exetern CRT, image timing for LCD is incorrect ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en
Re: [PATCH] 2.5.59 for ATI Mach64(port from Daniel code for 2.5.59)
From: James Simmons <hidden>
Date: 2003-01-24 19:08:07
Am Freitag, 17. Januar 2003 22:27 schrieb Alexander Kern:quoted
Hi, tested with ATI RAGE 3D MOBILITY M1 (P/M). 1400x1050 works, i assume all others must work too.Arrrrh, full speed back. Please don't beat me, it works only with 1400x1050 on exetern CRT, image timing for LCD is incorrect
Do you want me to applied the changes still? ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com