Re: Screen Capturing

2 messages, 2 authors, 2002-12-30 · open the first message on its own page

Re: Screen Capturing

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2002-12-27 11:34:06

On Fri, 27 Dec 2002, Abhilash wrote:
I need to capture the screen .For that I use mirror driver in Windows for
capturing screen.
ie, its basically overloading the driver functions.

So in case of Linux, is there any method like this or which is the best
method?
In Xlib there are some functions to capture screen and also heard abt VESA
which is better?
If you are using a frame buffer device, you can capture the contents of
/dev/fb*. Either read from /dev/fb*, or mmap() it. The data you receive are in
the native format of the graphics chip. For CLUT modes, you have to use an
ioctl() to get the colormap.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: Screen Capturing

From: Abhilash <hidden>
Date: 2002-12-30 11:43:53

Hello,

Thank you very much.
Let me check this.

Thank you,
Abhilash.

----- Original Message -----
From: "Geert Uytterhoeven" <geert@linux-m68k.org>
To: "Abhilash" <redacted>
Cc: "Linux Frame Buffer Device Development"
[off-list ref]
Sent: Friday, December 27, 2002 5:03 PM
Subject: Re: [Linux-fbdev-devel] Screen Capturing

On Fri, 27 Dec 2002, Abhilash wrote:
quoted
I need to capture the screen .For that I use mirror driver in Windows
for
quoted
capturing screen.
ie, its basically overloading the driver functions.

So in case of Linux, is there any method like this or which is the best
method?
In Xlib there are some functions to capture screen and also heard abt
VESA
quoted
which is better?
If you are using a frame buffer device, you can capture the contents of
/dev/fb*. Either read from /dev/fb*, or mmap() it. The data you receive
are in
the native format of the graphics chip. For CLUT modes, you have to use an
ioctl() to get the colormap.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker.
But
when I'm talking to journalists I just say "programmer" or something like
that.
    -- Linus Torvalds



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help