Hi Eric,
This is PowerPC architecture from AMCC(I work for AMCC). I am using 2.6.25 Kernel. According your suggestion I tested with out RAID I did not see any EXT-3 errors. I use "sum" command to check the data integrity of the files.
I ported ADMA driver to do HW accelerated XOR calculations . Also please note that RAID-5 works with 4K Page size.
Thanks,
Marri
----- Original Message ----
From: "<redacted>" <redacted>
To: tirumalareddy marri <redacted>
Cc: <redacted>; <redacted>
Sent: Sunday, July 27, 2008 6:52:05 PM
Subject: Re: 64k Page size + ext3 errors
I am using HW accelerated XOR engine for RAID-5 . I am seeing EXT3-fs
errors when I use 64K page size. When I use 4K page size I don't see any
issue. As many of you know, we will get better performance when we store
bigger files like videos.
Do you think it is specific to the filesystem on raid-5? Have you tested
w/o md? I'd be a little surprised if the problem is at the raid layer (so
cc'ing the ext3/4 list), but maybe you tested that already.
Which arch is it, and which kernel? How big is the filesystem? With full
geometry information it might be easier for someone to reproduce & debug.
Thanks,
-Eric
When I copy 128MB size files using 64k page size no issues seen. When I
tried to copy 1.8 GB file with 64KB page size support I am seeing the
following errors. Any clue what could be wrong.
Errors 1:
EXT3-fs error (device md0): ext3_new_block: Allocating block in system
zone - blocks from 65533, length 1
EXT3-fs error (device md0): ext3_new_block: Allocating block in system
zone - blocks from 65534, length 1
Errors2:
EXT3-fs error (device md0): ext3_readdir: bad entry in directory #2:
rec_len % 4 != 0 - offset=0, inode=3040
Thanks in Advance,
Marri
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html