[PATCH] Documentation: RAS: Use the real EDAC PCI parity control names
From: Karl Mehltretter <hidden>
Date: 2026-09-05 09:24:47
Also in:
linux-edac
Subsystem:
documentation, the rest · Maintainers:
Jonathan Corbet, Linus Torvalds
The document names the sysfs control
/sys/devices/system/edac/pci/check_pci_parity and the module parameter
edac_panic_on_pci_pe. Neither exists.
check_pci_parity was renamed to check_pci_errors by commit 91b99041c1d5
("drivers/edac: updated PCI monitoring"), after the document had been
written.
The module parameter has been edac_pci_panic_on_pe
(drivers/edac/edac_pci_sysfs.c) since it was introduced, and the
document described it as edac_panic_on_pci_pe from the start.
Use the real names.
Fixes: 91b99041c1d5 ("drivers/edac: updated PCI monitoring")
Fixes: 327dafb1c61c ("edac: core fix redundant sysfs controls to parameters")
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <redacted>
---
Documentation/admin-guide/RAS/main.rst | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/admin-guide/RAS/main.rst b/Documentation/admin-guide/RAS/main.rst
index 5a45db32c49b..c1040e5a5b35 100644
--- a/Documentation/admin-guide/RAS/main.rst
+++ b/Documentation/admin-guide/RAS/main.rst@@ -623,7 +623,7 @@ Under ``/sys/devices/system/edac/pci`` are control and attribute files as follows: -- ``check_pci_parity`` - Enable/Disable PCI Parity checking control file +- ``check_pci_errors`` - Enable/Disable PCI Parity checking control file This control file enables or disables the PCI Bus Parity scanning operation. Writing a 1 to this file enables the scanning. Writing
@@ -631,11 +631,11 @@ follows: Enable:: - echo "1" >/sys/devices/system/edac/pci/check_pci_parity + echo "1" >/sys/devices/system/edac/pci/check_pci_errors Disable:: - echo "0" >/sys/devices/system/edac/pci/check_pci_parity + echo "0" >/sys/devices/system/edac/pci/check_pci_errors - ``pci_parity_count`` - Parity Count
@@ -725,15 +725,15 @@ Module parameters module/kernel parameter:: - edac_panic_on_pci_pe=[0|1] + edac_pci_panic_on_pe=[0|1] Enable:: - echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe + echo "1" > /sys/module/edac_core/parameters/edac_pci_panic_on_pe Disable:: - echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe + echo "0" > /sys/module/edac_core/parameters/edac_pci_panic_on_pe
--
2.53.0