Commit fa41d10589be ("fpga: dfl-pci: locate DFLs by PCIe vendor specific
capability") provides documentation to the FPGA Device Feature List (DFL)
Framework Overview, but introduced new documentation warnings:

  ./Documentation/fpga/dfl.rst:
    505: WARNING: Title underline too short.
    523: WARNING: Unexpected indentation.
    523: WARNING: Blank line required after table.
    524: WARNING: Block quote ends without a blank line; unexpected unindent.

Rectify ReST formatting in ./Documentation/fpga/dfl.rst.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
applies cleanly on next-20210111

Moritz, Matthew, please ack.

Greg, please pick this doc fixup to your fpga -next tree on top of
the commit above.

 Documentation/fpga/dfl.rst | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index ea8cefc18bdb..c41ac76ffaae 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst

@@ -502,7 +502,7 @@ FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c)
 could be a reference.
 
 Location of DFLs on a PCI Device
-===========================
+================================
 The original method for finding a DFL on a PCI device assumed the start of the
 first DFL to offset 0 of bar 0.  If the first node of the DFL is an FME,
 then further DFLs in the port(s) are specified in FME header registers.

@@ -514,6 +514,7 @@ data begins with a 4 byte vendor specific register for the number of DFLs follow
 Offset/BIR vendor specific registers for each DFL. Bits 2:0 of Offset/BIR register
 indicates the BAR, and bits 31:3 form the 8 byte aligned offset where bits 2:0 are
 zero.
+::
 
         +----------------------------+
         |31     Number of DFLS      0|

-- 
2.17.1