# Re: \[PATCH 2/2\] w1: w1\_therm: Add support for GXCAS GX20MH01 device.

- From: Mauro Carvalho Chehab \<mchehab+huawei@kernel.org\>
- Date: 2020-10-06 13:19:24 
- List: linux-doc
- Page: https://ratatoskr.run/linux-doc/2020/10/6131983
- Thread: https://ratatoskr.run/linux-doc/2020/09/6094505/t.md

```text
Em Fri,  4 Sep 2020 19:00:04 +0300
Ivan Zaentsev [ref] escreveu:

> diff --git a/Documentation/w1/slaves/w1_therm.rst b/Documentation/w1/slaves/w1_therm.rst
> index f1148181f53e..00376501a5ef 100644
> --- a/Documentation/w1/slaves/w1_therm.rst
> +++ b/Documentation/w1/slaves/w1_therm.rst

>  
> @@ -130,4 +131,12 @@ conversion and temperature reads 85.00 (powerup value) or 127.94 (insufficient
>  power), the driver returns a conversion error. Bit mask ``2`` enables poll for
>  conversion completion (normal power only) by generating read cycles on the bus
>  after conversion starts. In parasite power mode this feature is not available.
> -Feature bit masks may be combined (OR).
> +Feature bit masks may be combined (OR). See accompanying sysfs documentation:
> +:ref:`Documentation/w1/slaves/w1_therm.rst <w1_therm>`
> +

As warned by Sphinx, this cross-reference is broken:

	.../Documentation/w1/slaves/w1_therm.rst:125: WARNING: undefined label: w1_therm (if the link has no caption the label must precede a section header)

Not sure what you wanted to point here.


Thanks,
Mauro
```