--- v3
+++ v2
@@ -1,17 +1,3 @@
-V3:
-
-Although have got Ack-by from driver author in the V2, i have to send
-V3 since the driver is changed due to the change of a property name
-in the dts.
-
-As Shawn.guo suggested, i renamed property "irq-gpio" to "wakeup-gpios".
-The reason is that, firstly the idiom of gpio naming in DT is *-gpios,
-even though most of time, it could be just one gpio, secondly as the pin is
-accessed as a gpio only in egalax_wake_up_device for waking up the device.
-
-This time i send the patches both to linux-input and linux-arm, 0001 and
-0002 belongs to linux-input, while the 0003 belongs to linux-arm.
-
 V2:
 
 Add return value checking for waking up the controller in the probe
@@ -27,16 +13,14 @@
 gpio is irq_to_gpio(), this API is dying and most platforms don't support
 it, we change it to a more generic way to use devcietree.
 
-Hui Wang (3):
+
+Hui Wang (2):
   Input: egalax_ts: get gpio from devicetree node
   Input: add devicetree binding note for egalax_ts
-  ARM: dts: imx6q-sabrelite: add eeti egalax touchscreen
 
- .../bindings/input/touchscreen/egalax-ts.txt       |   19 +++++++++++++++++++
- arch/arm/boot/dts/imx6q-sabrelite.dts              |   16 ++++++++++++++++
- arch/arm/boot/dts/imx6q.dtsi                       |    7 +++++++
+ .../bindings/input/touchscreen/egalax-ts.txt       |   17 +++++++++++++++++
  drivers/input/touchscreen/egalax_ts.c              |   19 ++++++++++++++++---
- 4 files changed, 58 insertions(+), 3 deletions(-)
+ 2 files changed, 33 insertions(+), 3 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
 
 --