Reviews by markus.mayer@broadcom.com
· linux-devicetree
All review-attestation trailers
(Reviewed-by / Acked-by /
Tested-by / Reported-by /
Suggested-by / Co-developed-by /
Reported-and-tested-by)
by this address on the linux-devicetree archive.
100 attestations · capped at 100 most-recent. (1 Acked-by, 99 Reviewed-by)
| Last | Message | Trailer |
|---|---|---|
| Re: [PATCH] dt-bindings: memory: convert Broadcom DPFE to dtschema
Markus Mayer
REVIEWED · 1 review, 1 by a maintainer
|
Acked-by | |
| [PATCH v6 RESEND 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 RESEND 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 RESEND 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 RESEND 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 RESEND 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v6 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
REVIEWED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [RESEND PATCH v5 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v5 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v5 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v5 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v5 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v4 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v4 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v4 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v4 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v4 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v3 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v3 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v5 3/5] regulator: add bcm590xx regulator driver
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v5 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
REVIEWED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v5 4/5] ARM: configs: bcm_defconfig: enable bcm590xx regulator support
Matt Porter
REVIEWED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v5 2/5] mfd: add bcm590xx pmu driver
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 3/5] regulator: add bcm590xx regulator driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 4/5] ARM: configs: bcm_defconfig: enable bcm590xx regulator support
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 2/5] mfd: add bcm590xx pmu driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 1/5] mfd: add bcm590xx pmu DT binding
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 1/5] mfd: add bcm590xx pmu DT binding
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 3/5] regulator: add bcm590xx regulator driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 4/5] ARM: configs: bcm_defconfig: enable bcm590xx regulator support
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 2/5] mfd: add bcm590xx pmu driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 1/5] mfd: add bcm590xx pmu DT binding
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 4/5] ARM: configs: bcm_defconfig: enable bcm590xx regulator support
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Matt Porter
SUPERSEDED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 3/5] regulator: add bcm590xx regulator driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 2/5] mfd: add bcm590xx pmu driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v2 1/5] Documentation: dt: Add Kona PWM binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v2 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v2 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v2 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH 2/6] regulator: add bcm59056 pmu DT binding
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 6/6] ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
Matt Porter
REVIEWED · 1 review, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 4/6] regulator: add bcm59056 regulator driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 3/6] mfd: add bcm59056 pmu driver
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v9 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v9 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v7 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v7 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v6 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v6 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v5 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 2/2] ARM: dts: bcm28155-ap: Enable all the i2c busses
Tim Kryger
REVIEWED · 3 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses
Tim Kryger
REVIEWED · 3 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 2/8] ARM: dts: Specify clocks for UARTs on bcm11351
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 7/8] clocksource: kona: Add basic use of external clock
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v4 8/8] ARM: dts: Specify clocks for timer on bcm11351
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH 5/5] ARM: bcm_defconfig: Enable PWM and Backlight
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH 1/5] Documentation: dt: Add kona-pwm binding
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Tim Kryger
SUPERSEDED · 2 reviews, 2 by maintainers
|
Reviewed-by | |
| [PATCH v2 2/5] i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 3/5] i2c: i2c-bcm-kona: Add support for high-speed mode
Tim Kryger
REVIEWED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351
Tim Kryger
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 2/8] ARM: dts: Specify clocks for UARTs on bcm11351
Tim Kryger
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 7/8] clocksource: kona: Add basic use of external clock
Tim Kryger
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v3 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks
Tim Kryger
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH V2 2/3] ARM: configs:enable thermal framework for bcm281xx
Wendy Ng
REVIEWED · 5 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH V2 3/3] ARM: dts: Add TMON driver support to bcm281xx
Wendy Ng
REVIEWED · 5 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH V2 1/3] thermal: bcm281xx: Add Temperature Monitor driver
Wendy Ng
REVIEWED · 5 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 9/9] ARM: dts: add usb udc support to bcm281xx
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH v2 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Matt Porter
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver
Wendy Ng
SUPERSEDED · 4 reviews, 1 by a maintainer
|
Reviewed-by | |
| [PATCH 2/3] ARM: configs:enable thermal framework for bcm281xx
Wendy Ng
SUPERSEDED · 4 reviews, 1 by a maintainer
|
Reviewed-by | |
| [RESEND PATCH 3/4] ARM: dts: bcm281xx: Add i2c busses
Tim Kryger
SUPERSEDED · 3 reviews, 1 by a maintainer
|
Reviewed-by | |
| [RESEND PATCH 1/4] i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver
Tim Kryger
SUPERSEDED · 2 reviews, 1 by a maintainer
|
Reviewed-by |