# Re: \[PATCH v6 01/17\] dt-bindings: rtc: renesas,rzn1-rtc: Add RZ/T2H and RZ/N2H support

- From: sashiko-bot@kernel.org
- Date: 2026-08-21 21:19:55 
- List: linux-devicetree
- Page: https://ratatoskr.run/linux-devicetree/2026/08/17447136
- Thread: https://ratatoskr.run/linux-rtc/2026/08/17447096/t.md

```text
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Add compatible strings for the RTC block found on the Renesas RZ/T2H
> (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
> 
> These SoCs integrate a closely related variant of the RZ/N1 RTC IP.
> Unlike RZ/N1, they do not implement the RTCA0SUBU register. This is
> not a limitation for Linux support, as these registers are not used
> when the RTC operates in "scmp" clock mode, which is required on
> RZ/T2H and RZ/N2H due to their 195.3 kHz input clock.
> 
> The RZ/T2H RTC variant also supports a 1Hz output signal on the
> RTCAT1HZ pin, controlled by the RTCA0CTL1[RTCA01HZE] bit. This bit is
> marked as reserved in the RZ/N1 hardware manual.
> 
> Update the binding schema to require the additional clock inputs used by
> these SoCs.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260821211032.13554-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=1

```
