# Re: \[PATCH v4 3/5\] net: phy: qcom: at803x: Add Qualcomm IPQ5018 Internal PHY support

- From: Andrew Lunn \<andrew@lunn.ch\>
- Date: 2025-06-09 12:24:42 
- List: linux-devicetree
- Page: https://ratatoskr.run/linux-devicetree/2025/06/3083356
- Thread: https://ratatoskr.run/netdev/2025/06/3083294/t.md

```text
> -#include <linux/phy.h>
> -#include <linux/module.h>
> -#include <linux/string.h>
> -#include <linux/netdevice.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
>  #include <linux/etherdevice.h>
>  #include <linux/ethtool_netlink.h>
> -#include <linux/bitfield.h>
> -#include <linux/regulator/of_regulator.h>
> -#include <linux/regulator/driver.h>
> -#include <linux/regulator/consumer.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
>  #include <linux/of.h>
> +#include <linux/phy.h>
>  #include <linux/phylink.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/reset.h>
>  #include <linux/sfp.h>
> +#include <linux/string.h>
>  #include <dt-bindings/net/qca-ar803x.h>

Please sort the headers in a separate patch. Cleanup and new features
are logically different things, so should not be mixed.

> +static void ipq5018_link_change_notify(struct phy_device *phydev)
> +{
> +	mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr,
> +			       IPQ5018_PHY_FIFO_CONTROL, IPQ5018_PHY_FIFO_RESET,
> +			       phydev->link ? IPQ5018_PHY_FIFO_RESET : 0);
> +}


link_change_notify is pretty much only used when the PHY is broken. So
it would be good to add a comment what is happening here. Why does the
FIFO need to be reset?

	Andrew
```
