[PATCH v4 3/6] DONOTMERGE: arm64: dts: ti: k3-am642-sk: Enable tps65219 power-button
From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2022-08-25 15:02:51
Also in:
linux-arm-kernel, linux-input, linux-omap, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
From: Jerome Neanne <redacted> This board uses the pin as a power-button, enable it. Needed for driver testing but official board support pending. TI commitment is required before board upstream kick-off. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Jerome Neanne <redacted> --- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1f7ce60ecb57..238798ea6a79 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts@@ -362,6 +362,7 @@ tps65219: pmic@30 { pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&gic500>; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + ti,power-button; buck1-supply = <&vcc_3v3_sys>; buck2-supply = <&vcc_3v3_sys>;
--
2.37.2