[PATCH 1/2] arm64: dts: qcom: introduce sa8540p-ride dts
From: Parikshit Pareek <hidden>
Date: 2022-07-21 15:46:16
Create new dts file specific for Qdrive board based on sa8540p chipset. Introduce common dtsi file sa8295p-adp.dtsi, to be included for adp and Qdrive board. Signed-off-by: Parikshit Pareek <redacted> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 378 +---------------- arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi | 385 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts | 15 + 4 files changed, 403 insertions(+), 376 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9e2a13d75f9d..fa0abcf7660b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8540p-adp-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 9398f0349944..adb6637117bc 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts@@ -2,388 +2,14 @@ /* * Copyright (c) 2021, The Linux Foundation. All rights reserved. * Copyright (c) 2022, Linaro Limited + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include <dt-bindings/spmi/spmi.h> - -#include "sa8540p.dtsi" +#include "sa8295p-adp.dtsi" / { model = "Qualcomm SA8295P ADP"; compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; - - aliases { - serial0 = &qup2_uart17; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - pmm8540-a-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_l3a: ldo3 { - regulator-name = "vreg_l3a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1208000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l13a: ldo13 { - regulator-name = "vreg_l13a"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - }; - - pmm8540-c-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1208000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l10c: ldo10 { - regulator-name = "vreg_l10c"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l17c: ldo17 { - regulator-name = "vreg_l17c"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - }; - - pmm8540-g-regulators { - compatible = "qcom,pm8150-rpmh-regulators"; - qcom,pmic-id = "g"; - - vreg_l3g: ldo3 { - regulator-name = "vreg_l3g"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l7g: ldo7 { - regulator-name = "vreg_l7g"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - vreg_l8g: ldo8 { - regulator-name = "vreg_l8g"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - }; -}; - -&qup2 { - status = "okay"; -}; - -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/sa8540p/adsp.mbn"; - status = "okay"; -}; - -&remoteproc_nsp0 { - firmware-name = "qcom/sa8540p/cdsp.mbn"; - status = "okay"; -}; - -&remoteproc_nsp1 { - firmware-name = "qcom/sa8540p/cdsp1.mbn"; - status = "okay"; -}; - -&spmi_bus { - pm8450a: pmic@0 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450c: pmic@4 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450e: pmic@8 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450g: pmic@c { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l17c>; - vcc-max-microamp = <800000>; - vccq-supply = <&vreg_l6c>; - vccq-max-microamp = <900000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l8g>; - vdda-pll-supply = <&vreg_l3g>; - - status = "okay"; }; - -&ufs_card_hc { - reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l10c>; - vcc-max-microamp = <800000>; - vccq-supply = <&vreg_l3c>; - vccq-max-microamp = <900000>; - - status = "okay"; -}; - -&ufs_card_phy { - vdda-phy-supply = <&vreg_l8g>; - vdda-pll-supply = <&vreg_l3g>; - - status = "okay"; -}; - -&usb_0 { - status = "okay"; -}; - -&usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7a>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l1c>; - vdda18-supply = <&vreg_l7c>; - vdda33-supply = <&vreg_l2c>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l4c>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_2_hsphy0 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy1 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy2 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_hsphy3 { - vdda-pll-supply = <&vreg_l5a>; - vdda18-supply = <&vreg_l7g>; - vdda33-supply = <&vreg_l13a>; - - status = "okay"; -}; - -&usb_2_qmpphy0 { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_2_qmpphy1 { - vdda-phy-supply = <&vreg_l3a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; -}; - -/* PINCTRL */
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi b/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi
new file mode 100644
index 000000000000..75ef77b7cac1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi@@ -0,0 +1,385 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/spmi/spmi.h> + +#include "sa8540p.dtsi" + +/ { + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&ufs_card_hc { + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_card_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l1c>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l2c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4c>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
new file mode 100644
index 000000000000..87077f7a321c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sa8295p-adp.dtsi" + +/ { + model = "Qualcomm SA8540 ADP"; + compatible = "qcom,sa8540p-adp-ride", "qcom,sa8540p"; +};
--
2.17.1