[PATCH] arm64: dts: qcom: sm8250-edo: Add dual CS35L41 amps

DORMANTno replies LANDED

From: Konrad Dybcio <hidden>
Date: 2022-02-22 01:48:14
Also in: linux-arm-msm, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Linus Torvalds

Landed in mainline as 551b614e2353 on 2022-04-12.

Add nodes for dual Cirrus Logic CS35L41 audio amps connected via I2C.

Signed-off-by: Konrad Dybcio <redacted>
---
 .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 82d9d09a3d09..96eab8ccf222 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -470,7 +470,35 @@ &i2c2 {
 	status = "okay";
 	clock-frequency = <1000000>;
 
-	/* Dual Cirrus Logic CS35L41 amps @ 40, 41 */
+	cs35l41_l: cs35l41@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: cs35l41@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
 };
 
 &i2c5 {
-- 
2.35.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help