[PATCH v3 1/1] arch: arm: dts: update bletchley dts
From: Potin Lai <hidden>
Date: 2022-02-09 11:10:55
updates: * seperate leds into multiple groups * switch sled numbering to 1-based * disable inchip rtc * add flash1 in fmc * switch spi2 pnor using spi-gpio * update gpio-line-names * add interrupt pin for each sledx_ioexp * enable mdio3 * update ADM1278 shunt resistor (300 micro Ohm) * add INA230 for each sled Signed-off-by: Potin Lai <redacted> --- Changes v2 -> v3: - enable mdio3 - update ADM1278 shunt resistor (300 micro Ohm) - change sys_log_id default state to off - add INA230 for each sled Changes v1 -> v2: - add interrupt pin for each sledx_ioexp - remove duplicated i2c1 node - remove all PCA955X_TYPE_GPIO (default is GPIO) --- .../dts/aspeed-bmc-facebook-bletchley.dts | 362 ++++++++++++------ 1 file changed, 235 insertions(+), 127 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index f973ea883b97..d0017bca86ad 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts@@ -5,6 +5,8 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Facebook Bletchley BMC";
@@ -53,113 +55,139 @@ // Fixed link }; - leds { + front_leds { compatible = "gpio-leds"; - sys_log_id { - retain-state-shutdown; - default-state = "keep"; - gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + gpios = <&pca_front 0 GPIO_ACTIVE_HIGH>; }; + }; + + fan_leds { + compatible = "gpio-leds"; fan0_blue { retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 8 GPIO_ACTIVE_HIGH>; }; fan1_blue { retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 9 GPIO_ACTIVE_HIGH>; }; fan2_blue { retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 10 GPIO_ACTIVE_HIGH>; }; fan3_blue { retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 11 GPIO_ACTIVE_HIGH>; }; fan0_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 12 GPIO_ACTIVE_HIGH>; }; fan1_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 13 GPIO_ACTIVE_HIGH>; }; fan2_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + gpios = <&pca_fan 14 GPIO_ACTIVE_HIGH>; }; fan3_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>; - }; - sled0_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>; - }; - sled0_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_fan 15 GPIO_ACTIVE_HIGH>; }; + }; + + sled1_leds { + compatible = "gpio-leds"; sled1_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled1 0 GPIO_ACTIVE_LOW>; }; sled1_blue { retain-state-shutdown; - default-state = "off"; - gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled1 1 GPIO_ACTIVE_LOW>; }; + }; + + sled2_leds { + compatible = "gpio-leds"; sled2_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled2 0 GPIO_ACTIVE_LOW>; }; sled2_blue { retain-state-shutdown; - default-state = "off"; - gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled2 1 GPIO_ACTIVE_LOW>; }; + }; + + sled3_leds { + compatible = "gpio-leds"; sled3_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled3 0 GPIO_ACTIVE_LOW>; }; sled3_blue { retain-state-shutdown; - default-state = "off"; - gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled3 1 GPIO_ACTIVE_LOW>; }; + }; + + sled4_leds { + compatible = "gpio-leds"; sled4_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled4 0 GPIO_ACTIVE_LOW>; }; sled4_blue { retain-state-shutdown; - default-state = "off"; - gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled4 1 GPIO_ACTIVE_LOW>; }; + }; + + sled5_leds { + compatible = "gpio-leds"; sled5_amber { retain-state-shutdown; - default-state = "off"; - gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled5 0 GPIO_ACTIVE_LOW>; }; sled5_blue { retain-state-shutdown; - default-state = "off"; - gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + gpios = <&pca_sled5 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled6_leds { + compatible = "gpio-leds"; + sled6_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca_sled6 0 GPIO_ACTIVE_LOW>; + }; + sled6_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca_sled6 1 GPIO_ACTIVE_LOW>; }; }; };
@@ -178,7 +206,8 @@ }; &rtc { - status = "okay"; + /* Use nxp,pcf85263 (i2c 6-0051) instead */ + status = "disabled"; }; &fmc {
@@ -188,26 +217,48 @@ m25p,fast-read; label = "bmc"; spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; #include "openbmc-flash-layout-128.dtsi" }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "flash1"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; }; &spi2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi2_default>; + + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; flash@0 { status = "okay"; m25p,fast-read; label = "pnor"; - spi-max-frequency = <100000000>; + spi-max-frequency = <12000000>; }; }; &i2c0 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -219,7 +270,7 @@ reg = <0x4f>; }; - sled0_ioexp: pca9539@76 { + sled1_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -227,14 +278,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT", - "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT", - "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY", - "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0"; + "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", + "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", + "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", + "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; }; - sled0_leds: pca9552@67 { + pca_sled1: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -243,13 +299,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","", + "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled0_fusb302: typec-portc@22 { + sled1_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -270,7 +326,11 @@ &i2c1 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -282,7 +342,7 @@ reg = <0x4f>; }; - sled1_ioexp: pca9539@76 { + sled2_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -290,14 +350,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", - "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", - "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", - "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", + "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", + "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", + "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; }; - sled1_leds: pca9552@67 { + pca_sled2: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -306,13 +371,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","", + "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled1_fusb302: typec-portc@22 { + sled2_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -331,13 +396,13 @@ }; }; -&i2c1 { - status = "okay"; -}; - &i2c2 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -349,7 +414,7 @@ reg = <0x4f>; }; - sled2_ioexp: pca9539@76 { + sled3_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -357,14 +422,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", - "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", - "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", - "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; + "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", + "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", + "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", + "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; }; - sled2_leds: pca9552@67 { + pca_sled3: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -373,13 +443,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","", + "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled2_fusb302: typec-portc@22 { + sled3_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -400,7 +470,11 @@ &i2c3 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -412,7 +486,7 @@ reg = <0x4f>; }; - sled3_ioexp: pca9539@76 { + sled4_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -420,14 +494,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", - "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", - "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", - "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; + "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", + "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", + "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", + "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; }; - sled3_leds: pca9552@67 { + pca_sled4: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -436,13 +515,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","", + "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled3_fusb302: typec-portc@22 { + sled4_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -463,7 +542,11 @@ &i2c4 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -475,7 +558,7 @@ reg = <0x4f>; }; - sled4_ioexp: pca9539@76 { + sled5_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -483,14 +566,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", - "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", - "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", - "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; + "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", + "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", + "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", + "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; }; - sled4_leds: pca9552@67 { + pca_sled5: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -499,13 +587,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","", + "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled4_fusb302: typec-portc@22 { + sled5_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -526,7 +614,11 @@ &i2c5 { status = "okay"; - /* TODO: Add ADC INA230 */ + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; mp5023@40 { compatible = "mps,mp5023";
@@ -538,7 +630,7 @@ reg = <0x4f>; }; - sled5_ioexp: pca9539@76 { + sled6_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; #address-cells = <1>;
@@ -546,14 +638,19 @@ gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = - "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", - "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", - "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", - "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; + "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT", + "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT", + "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY", + "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6"; }; - sled5_leds: pca9552@67 { + pca_sled6: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -562,13 +659,13 @@ #gpio-cells = <2>; gpio-line-names = - "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","", + "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM", "","","","", "","","","", "","","",""; }; - sled5_fusb302: typec-portc@22 { + sled6_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>;
@@ -632,7 +729,7 @@ reg = <0x40>; }; - front_leds: pca9552@67 { + pca_front: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -655,6 +752,7 @@ adm1278@11 { compatible = "adi,adm1278"; reg = <0x11>; + shunt-resistor-micro-ohms = <300>; }; tmp421@4c {
@@ -667,7 +765,7 @@ reg = <0x4d>; }; - fan_ioexp: pca9552@67 { + pca_fan: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; #address-cells = <1>;
@@ -700,36 +798,38 @@ /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","","","","","","", - /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","", + /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","", + "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","", /*H0-H7*/ "presence-riser1","presence-riser2", - "presence-sled0","presence-sled1", - "presence-sled2","presence-sled3", - "presence-sled4","presence-sled5", + "presence-sled1","presence-sled2", + "presence-sled3","presence-sled4", + "presence-sled5","presence-sled6", /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", - "","","","", + "","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", - /*L0-L7*/ "","","","","","","","", - /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1", - "ALERT_SLED2","ALERT_SLED3", - "ALERT_SLED4","ALERT_SLED5", + /*L0-L7*/ "","","","","","BMC_RTC_INT","","", + /*M0-M7*/ "ALERT_SLED1","ALERT_SLED2", + "ALERT_SLED3","ALERT_SLED4", + "ALERT_SLED5","ALERT_SLED6", "P12V_AUX_ALERT1","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","", "","BOARD_ID0","BOARD_ID1","BOARD_ID2", - /*P0-P7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT", /*Q0-Q7*/ "","","","","","","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","BAT_DETECT", "BMC_BT_WP0","BMC_BT_WP1","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "","RST_BMC_MVL","","", + /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT", "USB2_SEL0_A","USB2_SEL1_A", "USB2_SEL0_B","USB2_SEL1_B", /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","", + /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","", + "","","","", /*Z0-Z7*/ "","","","","","","",""; };
@@ -754,3 +854,11 @@ &pinctrl_adc12_default &pinctrl_adc13_default &pinctrl_adc14_default &pinctrl_adc15_default>; }; + +&mdio3 { + status = "okay"; + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-id002b.09ae"; + reg = <0>; + }; +};
--
2.17.1