[PATCH v5 7/9] dt-bindings: memory: tegra20: emc: Document new LPDDR2 sub-node
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2021-10-06 22:49:44
Also in:
linux-tegra, lkml
Subsystem:
memory controller drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Krzysztof Kozlowski, Rob Herring, Conor Dooley, Linus Torvalds
Some Tegra20 boards don't have RAM code stored in NVMEM, which is used for the memory chip identification and the identity information should be read out from LPDDR2 chip in this case. Document new sub-node containing generic LPDDR2 properties that will be used for the memory chip identification if RAM code isn't available. The identification is done by reading out memory configuration values from generic LPDDR2 mode registers of SDRAM chip and comparing them with the values of device-tree 'lpddr2' sub-node. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- .../nvidia,tegra20-emc.yaml | 23 +++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index cac6842dc8f1..2fa44951cfde 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml@@ -164,12 +164,20 @@ patternProperties: "#size-cells": const: 0 + lpddr2: + $ref: "ddr/jedec,lpddr2.yaml#" + type: object + patternProperties: "^emc-table@[0-9]+$": $ref: "#/$defs/emc-table" - required: - - nvidia,ram-code + oneOf: + - required: + - nvidia,ram-code + + - required: + - lpddr2 additionalProperties: false
@@ -227,4 +235,15 @@ examples: 0x00000000 0x00000000 0x00000000 0x00000000>; }; }; + + emc-tables@1 { + reg = <1>; + + lpddr2 { + compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4"; + revision-id1 = <1>; + density = <2048>; + io-width = <16>; + }; + }; };
--
2.32.0