[PATCH v3 1/4] dt-bindings: usb: dwc3: add reference clock period

@@ -252,6 +252,14 @@ properties:
     minimum: 0
     maximum: 0x3f
 
+  snps,ref-clock-period-ns:
+    description:
+      Value for REFCLKPER field of GUCTL register for reference clock period in
+      nanoseconds, when the hardware set default does not match the actual
+      clock.
+    minimum: 1
+    maximum: 0x3ff
+
   snps,rx-thr-num-pkt-prd:
     description:
       Periodic ESS RX packet threshold count (host mode only). Set this and

@@ -524,6 +524,89 @@ qrtr_requests {
 			};
 		};
 
+		ssphy_0: ssphy@78000 {
+			compatible = "qcom,ipq6018-qmp-usb3-phy";
+			reg = <0x0 0x78000 0x0 0x1C4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#clock-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: lane@78200 {
+				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+				      <0x0 0x00078400 0x0 0x200>, /* Rx */
+				      <0x0 0x00078800 0x0 0x1F8>, /* PCS */
+				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x079000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb3: usb3@8A00000 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x8AF8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <20000000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: dwc3@8A00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x8A00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,ref-clock-period-ns = <0x32>;
+				dr_mode = "host";
+			};
+		};
 	};
 
 	wcss: wcss-smp2p {

@@ -13,6 +13,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,ipq6018-dwc3
           - qcom,msm8996-dwc3
           - qcom,msm8998-dwc3
           - qcom,sc7180-dwc3

@@ -26,6 +26,7 @@
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
+#include <linux/bitfield.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>

@@ -351,6 +352,29 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 	}
 }
 
+/**
+ * dwc3_ref_clk_period - Reference clock period configuration
+ *		Default reference clock period depends on hardware
+ *		configuration. For systems with reference clock that differs
+ *		from the default, this will set clock period in DWC3_GUCTL
+ *		register.
+ * @dwc: Pointer to our controller context structure
+ * @ref_clk_per: reference clock period in ns
+ */
+static void dwc3_ref_clk_period(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	if (dwc->ref_clk_per == 0)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
+	reg &= ~DWC3_GUCTL_REFCLKPER_MASK;
+	reg |=  FIELD_PREP(DWC3_GUCTL_REFCLKPER_MASK, dwc->ref_clk_per);
+	dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+}
+
+
 /**
  * dwc3_free_one_event_buffer - Frees one event buffer
  * @dwc: Pointer to our controller context structure

@@ -1011,6 +1035,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	/* Adjust Frame Length */
 	dwc3_frame_length_adjustment(dwc);
 
+	/* Adjust Reference Clock Period */
+	dwc3_ref_clk_period(dwc);
+
 	dwc3_set_incr_burst_type(dwc);
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);

@@ -1371,6 +1398,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				    &dwc->hsphy_interface);
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
 				 &dwc->fladj);
+	device_property_read_u32(dev, "snps,ref-clock-period-ns",
+				 &dwc->ref_clk_per);
 
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");

@@ -386,6 +386,10 @@
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		BIT(7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
 
+/* Global User Control Register*/
+#define DWC3_GUCTL_REFCLKPER_MASK		0xffc00000
+#define DWC3_GUCTL_REFCLKPER_SEL		22
+
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 

@@ -969,6 +973,7 @@ struct dwc3_scratchpad_array {
  * @regs: base address for our registers
  * @regs_size: address space size
  * @fladj: frame length adjustment
+ * @ref_clk_per: reference clock period configuration
  * @irq_gadget: peripheral controller's IRQ number
  * @otg_irq: IRQ number for OTG IRQs
  * @current_otg_role: current role of operation while using the OTG block

@@ -1141,6 +1146,7 @@ struct dwc3 {
 	struct power_supply	*usb_psy;
 
 	u32			fladj;
+	u32			ref_clk_per;
 	u32			irq_gadget;
 	u32			otg_irq;
 	u32			current_otg_role;