[PATCH] ARM: dts: imx7: add ftm nodes for Flex Timers

Subsystems: the rest

STALE1890d

2 messages, 2 authors, 2021-08-09 · open the first message on its own page

[PATCH] ARM: dts: imx7: add ftm nodes for Flex Timers

From: Thomas Perrot <hidden>
Date: 2021-08-05 15:08:41

The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the
block is the same as LS1021a, then the drivers can be used as-is.

Signed-off-by: Thomas Perrot <redacted>
---
 arch/arm/boot/dts/imx7s.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a22d41e0cf31..1843fc053870 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -707,6 +707,34 @@ ecspi4: spi@30630000 {
 				status = "disabled";
 			};
 
+			ftm1: pwm@30640000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30640000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			ftm2: pwm@30650000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30650000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+				status = "disabled";
+			};
+
 			pwm1: pwm@30660000 {
 				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 				reg = <0x30660000 0x10000>;
-- 
2.31.1

Re: [PATCH] ARM: dts: imx7: add ftm nodes for Flex Timers

From: Shawn Guo <shawnguo@kernel.org>
Date: 2021-08-09 08:11:32

On Thu, Aug 05, 2021 at 05:06:33PM +0200, Thomas Perrot wrote:
The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the
block is the same as LS1021a, then the drivers can be used as-is.

Signed-off-by: Thomas Perrot <redacted>
Applied, thanks!
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help