[PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\

Convert eeprom-93xx46 binding documentation from txt to yaml format

Signed-off-by: Aswath Govindraju <redacted>
---

Device tree fixes required are posted in the following patch,
https://lore.kernel.org/patchwork/project/lkml/list/?series=511477


 .../bindings/misc/eeprom-93xx46.txt           | 29 --------
 .../bindings/misc/eeprom-93xx46.yaml          | 72 +++++++++++++++++++
 2 files changed, 72 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
 create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
deleted file mode 100644
index 72ea0af368d4..000000000000
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ /dev/null

@@ -1,29 +0,0 @@
-EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
-
-Required properties:
-- compatible : shall be one of:
-    "atmel,at93c46"
-    "atmel,at93c46d"
-    "atmel,at93c56"
-    "atmel,at93c66"
-    "eeprom-93xx46"
-    "microchip,93lc46b"
-- data-size : number of data bits per word (either 8 or 16)
-
-Optional properties:
-- read-only : parameter-less property which disables writes to the EEPROM
-- select-gpios : if present, specifies the GPIO that will be asserted prior to
-  each access to the EEPROM (e.g. for SPI bus multiplexing)
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Example:
-	eeprom@0 {
-		compatible = "eeprom-93xx46";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cs-high;
-		data-size = <8>;
-		select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-	};

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
new file mode 100644
index 000000000000..4254a7be5a70
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  $nodename:
+    pattern: "@[0-9]+$"
+
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  spi-max-frequency: true
+  spi-cs-high: true
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM
+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };

-- 
2.17.1

On Tue, Aug 10, 2021 at 12:18:59PM +0530, Aswath Govindraju wrote:

Convert eeprom-93xx46 binding documentation from txt to yaml format

Drop the trailing '\' in the subject.

Unless you want to define 'eeprom' as the correct node name, there's no 
point in this. The unit address is checked by the spi bus schema and 
it's also wrong here being decimal.

type: boolean.

spi {

+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
-- 
2.17.1

Hi Rob,

On 18/08/21 1:16 am, Rob Herring wrote:

On Tue, Aug 10, 2021 at 12:18:59PM +0530, Aswath Govindraju wrote:

quoted

Convert eeprom-93xx46 binding documentation from txt to yaml format

Drop the trailing '\' in the subject.

quoted

Signed-off-by: Aswath Govindraju <redacted>
---

Device tree fixes required are posted in the following patch,
https://lore.kernel.org/patchwork/project/lkml/list/?series=511477

Thank you for review comments. I have made the required corrections and
posted v2[1] for this patch.

[1] - https://lore.kernel.org/patchwork/project/lkml/list/?series=512773

Thanks,
Aswath

quoted

 .../bindings/misc/eeprom-93xx46.txt           | 29 --------
 .../bindings/misc/eeprom-93xx46.yaml          | 72 +++++++++++++++++++
 2 files changed, 72 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
 create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
deleted file mode 100644
index 72ea0af368d4..000000000000
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ /dev/null

@@ -1,29 +0,0 @@
-EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
-
-Required properties:
-- compatible : shall be one of:
-    "atmel,at93c46"
-    "atmel,at93c46d"
-    "atmel,at93c56"
-    "atmel,at93c66"
-    "eeprom-93xx46"
-    "microchip,93lc46b"
-- data-size : number of data bits per word (either 8 or 16)
-
-Optional properties:
-- read-only : parameter-less property which disables writes to the EEPROM
-- select-gpios : if present, specifies the GPIO that will be asserted prior to
-  each access to the EEPROM (e.g. for SPI bus multiplexing)
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Example:
-	eeprom@0 {
-		compatible = "eeprom-93xx46";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cs-high;
-		data-size = <8>;
-		select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-	};

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
new file mode 100644
index 000000000000..4254a7be5a70
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  $nodename:
+    pattern: "@[0-9]+$"

Unless you want to define 'eeprom' as the correct node name, there's no 
point in this. The unit address is checked by the spi bus schema and 
it's also wrong here being decimal.

quoted

+
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  spi-max-frequency: true
+  spi-cs-high: true
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM

type: boolean.

quoted

+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi0 {

spi {

quoted

+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
-- 
2.17.1