[PATCH] arm64: dts: imx8mp: Add dsp node

From: Daniel Baluta <daniel.baluta@nxp.com>

i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a
custom firmware or the open source SOF firmware [1]

DSP device is handled by SOF OF driver found in
sound/soc/sof/sof-of-dev.c

Notice that the DSP node makes use of:
	- dsp_reserved, a reserved memory region for various Audio
	  resources (e.g firmware loading, audio buffers, etc).
	- Messaging Unit (mu2) for passing notifications betweem ARM
	  core and DSP.

[1] https://thesofproject.github.io/latest/platforms/index.html
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 28 +++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9f7c7f587d38..264ba540f363 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -135,6 +135,17 @@ clk_ext4: clock-ext4 {
 		clock-output-names = "clk_ext4";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7

@@ -698,6 +709,13 @@ mu: mailbox@30aa0000 {
 				#mbox-cells = <2>;
 			};
 
+			mu2: mailbox@30e60000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30e60000 0x10000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;

@@ -938,5 +956,15 @@ usb_dwc3_1: usb@38200000 {
 				snps,dis-u2-freeclk-exists-quirk;
 			};
 		};
+		dsp: dsp@3b6e8000 {
+			compatible = "fsl,imx8mp-dsp";
+			reg = <0x3b6e8000 0x88000>;
+			mbox-names = "txdb0", "txdb1",
+				"rxdb0", "rxdb1";
+			mboxes = <&mu2 2 0>, <&mu2 2 1>,
+				<&mu2 3 0>, <&mu2 3 1>;
+			memory-region = <&dsp_reserved>;
+			status = "disabled";
+		};
 	};
 };

-- 
2.27.0

Hi Daniel

I think better mark this node as disabled. If its clock not enabled,
kernel may hang.

Regards,
Peng.

On Fri, Jul 16, 2021 at 5:05 AM Peng Fan [off-list ref] wrote:

Hi Daniel

quoted

Subject: [PATCH] arm64: dts: imx8mp: Add dsp node

From: Daniel Baluta <daniel.baluta@nxp.com>

i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a custom
firmware or the open source SOF firmware [1]

DSP device is handled by SOF OF driver found in sound/soc/sof/sof-of-dev.c

Notice that the DSP node makes use of:
      - dsp_reserved, a reserved memory region for various Audio
        resources (e.g firmware loading, audio buffers, etc).
      - Messaging Unit (mu2) for passing notifications betweem ARM
        core and DSP.

[1] https://thesofproject.github.io/latest/platforms/index.html
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 28
+++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi

b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9f7c7f587d38..264ba540f363 100644

--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -135,6 +135,17 @@ clk_ext4: clock-ext4 {
              clock-output-names = "clk_ext4";
      };

+     reserved-memory {
+             #address-cells = <2>;
+             #size-cells = <2>;
+             ranges;
+
+             dsp_reserved: dsp@92400000 {
+                     reg = <0 0x92400000 0 0x2000000>;
+                     no-map;
+             };
+     };
+
      pmu {
              compatible = "arm,cortex-a53-pmu";
              interrupts = <GIC_PPI 7

@@ -698,6 +709,13 @@ mu: mailbox@30aa0000 {
                              #mbox-cells = <2>;
                      };

+                     mu2: mailbox@30e60000 {
+                             compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+                             reg = <0x30e60000 0x10000>;
+                             interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+                             #mbox-cells = <2>;

I think better mark this node as disabled. If its clock not enabled,
kernel may hang.

Good point. Fixed in v2.