[PATCH] arm64: dts: ipq8074: Add QUP6 I2C node
From: Robert Marko <hidden>
Date: 2021-06-19 16:28:04
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add node to support the QUP6 I2C controller inside of IPQ8074. It is exactly the same as QUP2 and QUP3 controllers. Some routers like Xiaomi AX9000 and Netgear RBK850 use this bus. Signed-off-by: Robert Marko <redacted> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a5b16e151485..07404cdbf697 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi@@ -455,6 +455,21 @@ blsp1_i2c3: i2c@78b7000 { status = "disabled"; }; + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + dmas = <&blsp_dma 23>, <&blsp_dma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07984000 0x1a000>;
--
2.31.1