[PATCH v2 00/12] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support

STALE1879d

Revision v2 of 3 in this series.

28 messages, 4 authors, 2021-06-09 · open the first message on its own page

[PATCH v2 00/12] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:14

Hi All,

This patch series adds initial support for Renesas RZ/G2L SoC and
Renesas RZ/G2L SMARC EVK.

Initial patches enables minimal peripherals on Renesas RZ/G2L
SMARC EVK and booted via initramfs.
* Documentation for RZ/G2{L,LC,UL} SoC variants
* SoC identification support
* CPG core support
* Minimal SoC DTSi
* Minimal DTS for SMARC EVK

Changes for v2:
* Included type-2 RZ/G2Ul SoC in binding doc
* Added single entry for SMARC EVK "renesas,smarc-evk"
* Renamed ARCH_R9A07G044L to ARCH_R9A07G044 and
  dropped ARCH_R9A07G044LC config
* Dropped SoC identification changes will post them as
  separate patch.
* Updated comment in sh-sci.c
* Binding documentation patch for serial driver has been
  accepted so dropped the patch from this series
* Incorporated changes requested by Geert for CPG core
* Fixed dtbs_check errors
* Dropped 'clock-names'/'clocks'/'power-domains'/'resets'
  properties from GIC node and will include them in a separate
  patch along with arm,gic-v3.yaml binding updates
* Included ACK's from Rob

Patches are based on top of [1] master branch.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/

Cheers,
Prabhakar

Biju Das (1):
  serial: sh-sci: Add support for RZ/G2L SoC

Lad Prabhakar (11):
  dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  dt-bindings: arm: renesas: Document SMARC EVK
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  arm64: defconfig: Enable ARCH_R9A07G044
  clk: renesas: Define RZ/G2L CPG Clock Definitions
  dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  clk: renesas: Add support for R9A07G044 SoC
  arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK

 .../devicetree/bindings/arm/renesas.yaml      |  18 +
 .../bindings/clock/renesas,rzg2l-cpg.yaml     |  80 ++
 arch/arm64/boot/dts/renesas/Makefile          |   2 +
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    | 119 +++
 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi  |  25 +
 .../boot/dts/renesas/r9a07g044l2-smarc.dts    |  21 +
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  |  27 +
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/Kconfig                   |   9 +
 drivers/clk/renesas/Makefile                  |   2 +
 drivers/clk/renesas/r9a07g044-cpg.c           | 372 +++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.c       | 979 ++++++++++++++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.h       | 217 ++++
 drivers/soc/renesas/Kconfig                   |   5 +
 drivers/tty/serial/sh-sci.c                   |  12 +-
 drivers/tty/serial/sh-sci.h                   |   1 +
 include/dt-bindings/clock/r9a07g044-cpg.h     |  89 ++
 17 files changed, 1978 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
 create mode 100644 drivers/clk/renesas/r9a07g044-cpg.c
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.c
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.h
 create mode 100644 include/dt-bindings/clock/r9a07g044-cpg.h

-- 
2.17.1

[PATCH v2 01/12] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:17

Add device tree bindings documentation for Renesas RZ/G2UL SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/renesas.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 5fd0696a9f91..3b79108b49a0 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -302,6 +302,13 @@ properties:
               - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
           - const: renesas,r9a06g032
 
+      - description: RZ/G2UL (R9A07G043)
+        items:
+          - enum:
+              - renesas,r9a07g043u11 # RZ/G2UL Type-1
+              - renesas,r9a07g043u12 # RZ/G2UL Type-2
+          - const: renesas,r9a07g043
+
 additionalProperties: true
 
 ...
-- 
2.17.1

Re: [PATCH v2 01/12] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:24:07

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Add device tree bindings documentation for Renesas RZ/G2UL SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 02/12] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:21

Add device tree bindings documentation for Renesas RZ/G2{L,LC}
SoC variants.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/renesas.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 3b79108b49a0..0f99408960d7 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -309,6 +309,15 @@ properties:
               - renesas,r9a07g043u12 # RZ/G2UL Type-2
           - const: renesas,r9a07g043
 
+      - description: RZ/G2{L,LC} (R9A07G044)
+        items:
+          - enum:
+              - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
+              - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
+          - const: renesas,r9a07g044
+
 additionalProperties: true
 
 ...
-- 
2.17.1

Re: [PATCH v2 02/12] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:24:11

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Add device tree bindings documentation for Renesas RZ/G2{L,LC}
SoC variants.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 03/12] dt-bindings: arm: renesas: Document SMARC EVK

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:24

Document Renesas SMARC EVK board which are based on RZ/G2L (R9A07G044)
SoC. The SMARC EVK consists of RZ/G2L SoM module and SMARC carrier board,
the SoM module sits on top of carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/renesas.yaml | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 0f99408960d7..a0cce4e25039 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -311,6 +311,8 @@ properties:
 
       - description: RZ/G2{L,LC} (R9A07G044)
         items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
           - enum:
               - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
               - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
-- 
2.17.1

Re: [PATCH v2 03/12] dt-bindings: arm: renesas: Document SMARC EVK

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:24:29

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Document Renesas SMARC EVK board which are based on RZ/G2L (R9A07G044)
SoC. The SMARC EVK consists of RZ/G2L SoM module and SMARC carrier board,
the SoM module sits on top of carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 04/12] soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:29

Add ARCH_R9A07G044 as a configuration symbol for the new Renesas
RZ/G2L SoC variants.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/soc/renesas/Kconfig | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index b70bbc38efc6..71b44c31b012 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -279,6 +279,11 @@ config ARCH_R8A774B1
 	help
 	  This enables support for the Renesas RZ/G2N SoC.
 
+config ARCH_R9A07G044
+	bool "ARM64 Platform support for RZ/G2L"
+	help
+	  This enables support for the Renesas RZ/G2L SoC variants.
+
 endif # ARM64
 
 config RST_RCAR
-- 
2.17.1

Re: [PATCH v2 04/12] soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:25:14

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Add ARCH_R9A07G044 as a configuration symbol for the new Renesas
RZ/G2L SoC variants.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 05/12] arm64: defconfig: Enable ARCH_R9A07G044

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:33

Enable the Renesas RZ/G2L SoC variants in the ARM64 defconfig.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c1110fc20cdb..756fb464b107 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1044,6 +1044,7 @@ CONFIG_ARCH_R8A77980=y
 CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_R8A779A0=y
+CONFIG_ARCH_R9A07G044=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
-- 
2.17.1

Re: [PATCH v2 05/12] arm64: defconfig: Enable ARCH_R9A07G044

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:25:47

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Enable the Renesas RZ/G2L SoC variants in the ARM64 defconfig.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 06/12] clk: renesas: Define RZ/G2L CPG Clock Definitions

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:37

Define RZ/G2L (R9A07G044) Clock Pulse Generator Core Clock
and module clock outputs, as listed in Table 8.3 ("Clock List")
of the RZ/G2L Hardware User's Manual (Rev.0.42, Feb.2021).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 include/dt-bindings/clock/r9a07g044-cpg.h | 89 +++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 include/dt-bindings/clock/r9a07g044-cpg.h
diff --git a/include/dt-bindings/clock/r9a07g044-cpg.h b/include/dt-bindings/clock/r9a07g044-cpg.h
new file mode 100644
index 000000000000..1d8986563fc5
--- /dev/null
+++ b/include/dt-bindings/clock/r9a07g044-cpg.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__
+#define __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A07G044 CPG Core Clocks */
+#define R9A07G044_CLK_I			0
+#define R9A07G044_CLK_I2		1
+#define R9A07G044_CLK_G			2
+#define R9A07G044_CLK_S0		3
+#define R9A07G044_CLK_S1		4
+#define R9A07G044_CLK_SPI0		5
+#define R9A07G044_CLK_SPI1		6
+#define R9A07G044_CLK_SD0		7
+#define R9A07G044_CLK_SD1		8
+#define R9A07G044_CLK_M0		9
+#define R9A07G044_CLK_M1		10
+#define R9A07G044_CLK_M2		11
+#define R9A07G044_CLK_M3		12
+#define R9A07G044_CLK_M4		13
+#define R9A07G044_CLK_HP		14
+#define R9A07G044_CLK_TSU		15
+#define R9A07G044_CLK_ZT		16
+#define R9A07G044_CLK_P0		17
+#define R9A07G044_CLK_P1		18
+#define R9A07G044_CLK_P2		19
+#define R9A07G044_CLK_AT		20
+#define R9A07G044_OSCCLK		21
+
+/* R9A07G044 Module Clocks */
+#define R9A07G044_CLK_GIC600		0
+#define R9A07G044_CLK_IA55		1
+#define R9A07G044_CLK_SYC		2
+#define R9A07G044_CLK_DMAC		3
+#define R9A07G044_CLK_SYSC		4
+#define R9A07G044_CLK_MTU		5
+#define R9A07G044_CLK_GPT		6
+#define R9A07G044_CLK_ETH0		7
+#define R9A07G044_CLK_ETH1		8
+#define R9A07G044_CLK_I2C0		9
+#define R9A07G044_CLK_I2C1		10
+#define R9A07G044_CLK_I2C2		11
+#define R9A07G044_CLK_I2C3		12
+#define R9A07G044_CLK_SCIF0		13
+#define R9A07G044_CLK_SCIF1		14
+#define R9A07G044_CLK_SCIF2		15
+#define R9A07G044_CLK_SCIF3		16
+#define R9A07G044_CLK_SCIF4		17
+#define R9A07G044_CLK_SCI0		18
+#define R9A07G044_CLK_SCI1		19
+#define R9A07G044_CLK_GPIO		20
+#define R9A07G044_CLK_SDHI0		21
+#define R9A07G044_CLK_SDHI1		22
+#define R9A07G044_CLK_USB0		23
+#define R9A07G044_CLK_USB1		24
+#define R9A07G044_CLK_CANFD		25
+#define R9A07G044_CLK_SSI0		26
+#define R9A07G044_CLK_SSI1		27
+#define R9A07G044_CLK_SSI2		28
+#define R9A07G044_CLK_SSI3		29
+#define R9A07G044_CLK_MHU		30
+#define R9A07G044_CLK_OSTM0		31
+#define R9A07G044_CLK_OSTM1		32
+#define R9A07G044_CLK_OSTM2		33
+#define R9A07G044_CLK_WDT0		34
+#define R9A07G044_CLK_WDT1		35
+#define R9A07G044_CLK_WDT2		36
+#define R9A07G044_CLK_WDT_PON		37
+#define R9A07G044_CLK_GPU		38
+#define R9A07G044_CLK_ISU		39
+#define R9A07G044_CLK_H264		40
+#define R9A07G044_CLK_CRU		41
+#define R9A07G044_CLK_MIPI_DSI		42
+#define R9A07G044_CLK_LCDC		43
+#define R9A07G044_CLK_SRC		44
+#define R9A07G044_CLK_RSPI0		45
+#define R9A07G044_CLK_RSPI1		46
+#define R9A07G044_CLK_RSPI2		47
+#define R9A07G044_CLK_ADC		48
+#define R9A07G044_CLK_TSU_PCLK		49
+#define R9A07G044_CLK_SPI		50
+#define R9A07G044_CLK_MIPI_DSI_V	51
+#define R9A07G044_CLK_MIPI_DSI_PIN	52
+
+#endif /* __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__ */
-- 
2.17.1

Re: [PATCH v2 06/12] clk: renesas: Define RZ/G2L CPG Clock Definitions

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:25:45

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Define RZ/G2L (R9A07G044) Clock Pulse Generator Core Clock
and module clock outputs, as listed in Table 8.3 ("Clock List")
of the RZ/G2L Hardware User's Manual (Rev.0.42, Feb.2021).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
LGTM.

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 07/12] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:41

Document the device tree bindings of the Renesas RZ/G2L SoC clock
driver in Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/clock/renesas,rzg2l-cpg.yaml     | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
new file mode 100644
index 000000000000..fe32d4daac32
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Stop, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC,UL}
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a07g044l-cpg.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the <dt-bindings/clock/r9a07g044l-cpg.h>.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Stop should refer to the CPG device
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the <dt-bindings/clock/r9a07g044l-cpg.h>.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@11010000 {
+            compatible = "renesas,r9a07g044-cpg";
+            reg = <0x11010000 0x10000>;
+            clocks = <&extal_clk>;
+            clock-names = "extal";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
-- 
2.17.1

Re: [PATCH v2 07/12] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:09:00

Hi Prabhakar,

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Document the device tree bindings of the Renesas RZ/G2L SoC clock
driver in Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
IIRC, Rob gave his R-b, not his A-b.
quoted hunk
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Stop, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC,UL}
Shouldn't RZ/G2UL use renesas,r9a07g043-cpg?
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a07g044l-cpg.h>
r9a07g044-cpg.h
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the <dt-bindings/clock/r9a07g044l-cpg.h>.
r9a07g044-cpg.h
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Stop should refer to the CPG device
Module Standby
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the <dt-bindings/clock/r9a07g044l-cpg.h>.
r9a07g044-cpg.h

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 08/12] clk: renesas: Add CPG core wrapper for RZ/G2L SoC

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:46

Add CPG core wrapper for RZ/G2L family.

Based on a patch in the BSP by Binh Nguyen
[off-list ref].

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/Kconfig             |   4 +
 drivers/clk/renesas/Makefile            |   1 +
 drivers/clk/renesas/renesas-rzg2l-cpg.c | 973 ++++++++++++++++++++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.h | 215 ++++++
 4 files changed, 1193 insertions(+)
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.c
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.h
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 607e64a17d72..5a0d934f43a4 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -182,6 +182,10 @@ config CLK_RCAR_USB2_CLOCK_SEL
 	help
 	  This is a driver for R-Car USB2 clock selector
 
+config CLK_RZG2L
+	bool "Renesas RZ/G2L SoC clock support" if COMPILE_TEST && !ARCH_RENESAS
+	depends on ARCH_RENESAS || COMPILE_TEST
+
 # Generic
 config CLK_RENESAS_CPG_MSSR
 	bool "CPG/MSSR clock support" if COMPILE_TEST
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index ef0d2bba92bf..a9c299686b4a 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_CLK_RCAR_CPG_LIB)		+= rcar-cpg-lib.o
 obj-$(CONFIG_CLK_RCAR_GEN2_CPG)		+= rcar-gen2-cpg.o
 obj-$(CONFIG_CLK_RCAR_GEN3_CPG)		+= rcar-gen3-cpg.o
 obj-$(CONFIG_CLK_RCAR_USB2_CLOCK_SEL)	+= rcar-usb2-clock-sel.o
+obj-$(CONFIG_CLK_RZG2L)			+= renesas-rzg2l-cpg.o
 
 # Generic
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o
diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.c b/drivers/clk/renesas/renesas-rzg2l-cpg.c
new file mode 100644
index 000000000000..f096b9d0548c
--- /dev/null
+++ b/drivers/clk/renesas/renesas-rzg2l-cpg.c
@@ -0,0 +1,973 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZ/G2L Clock Pulse Generator
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ *
+ * Based on renesas-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2013 Ideas On Board SPRL
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/renesas.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+#include "renesas-rzg2l-cpg.h"
+
+#ifdef DEBUG
+#define WARN_DEBUG(x)	WARN_ON(x)
+#else
+#define WARN_DEBUG(x)	do { } while (0)
+#endif
+
+#define DIV_RSMASK(v, s, m)	((v >> s) & m)
+#define GET_REG(val)		((val >> 20) & 0xfff)
+#define GET_SHIFT(val)		((val >> 12) & 0xff)
+#define GET_WIDTH(val)		((val >> 8) & 0xf)
+
+#define KDIV(val)		DIV_RSMASK(val, 16, 0xffff)
+#define MDIV(val)		DIV_RSMASK(val, 6, 0x3ff)
+#define PDIV(val)		DIV_RSMASK(val, 0, 0x3f)
+#define SDIV(val)		DIV_RSMASK(val, 0, 0x7)
+#define REFDIV(val)		DIV_RSMASK(val, 8, 0x3f)
+#define POSTDIV1(val)		DIV_RSMASK(val, 0, 0x7)
+#define POSTDIV2(val)		DIV_RSMASK(val, 4, 0x7)
+#define FRACIN(val)		DIV_RSMASK(val, 8, 0xffffff)
+#define INITIN(val)		DIV_RSMASK(val, 16, 0xfff)
+
+#define CLK_ON_R(reg)		(reg)
+#define CLK_MON_R(reg)		(0x680 - 0x500 + (reg))
+#define CLK_RST_R(reg)		(0x800 - 0x500 + (reg))
+#define CLK_MRST_R(reg)		(0x980 - 0x500 + (reg))
+
+#define GET_REG1(val)		((val >> 22) & 0x3ff)
+#define GET_REG2(val)		((val >> 12) & 0x3ff)
+#define GET_REG3(val)		(val & 0x3ff)
+
+/**
+ * struct rzg2l_cpg_priv - Clock Pulse Generator Private Data
+ *
+ * @rcdev: Optional reset controller entity
+ * @dev: CPG device
+ * @base: CPG register block base address
+ * @rmw_lock: protects RMW register accesses
+ * @clks: Array containing all Core and Module Clocks
+ * @num_core_clks: Number of Core Clocks in clks[]
+ * @num_mod_clks: Number of Module Clocks in clks[]
+ * @last_dt_core_clk: ID of the last Core Clock exported to DT
+ * @notifiers: Notifier chain to save/restore clock state for system resume
+ * @info: Pointer to platform data
+ */
+struct rzg2l_cpg_priv {
+#ifdef CONFIG_RESET_CONTROLLER
+	struct reset_controller_dev rcdev;
+#endif
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t rmw_lock;
+
+	struct clk **clks;
+	unsigned int num_core_clks;
+	unsigned int num_mod_clks;
+	unsigned int last_dt_core_clk;
+
+	struct raw_notifier_head notifiers;
+	const struct rzg2l_cpg_info *info;
+};
+
+static void rzg2l_cpg_del_clk_provider(void *data)
+{
+	of_clk_del_provider(data);
+}
+
+static struct clk * __init
+rzg2l_cpg_div_clk_register(const struct cpg_core_clk *core,
+			   struct clk **clks,
+			   void __iomem *base,
+			   struct rzg2l_cpg_priv *priv)
+{
+	struct device *dev = priv->dev;
+	const struct clk *parent;
+	const char *parent_name;
+	struct clk_hw *clk_hw;
+
+	parent = clks[core->parent & 0xffff];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	parent_name = __clk_get_name(parent);
+
+	if (core->dtable)
+		clk_hw = clk_hw_register_divider_table(dev, core->name,
+						       parent_name, 0,
+						       base + GET_REG(core->conf),
+						       GET_SHIFT(core->conf),
+						       GET_WIDTH(core->conf),
+						       core->flag,
+						       core->dtable,
+						       &priv->rmw_lock);
+	else
+		clk_hw = clk_hw_register_divider(dev, core->name,
+						 parent_name, 0,
+						 base + GET_REG(core->conf),
+						 GET_SHIFT(core->conf),
+						 GET_WIDTH(core->conf),
+						 core->flag, &priv->rmw_lock);
+
+	if (IS_ERR(clk_hw))
+		return NULL;
+
+	return clk_hw->clk;
+}
+
+static struct clk * __init
+rzg2l_cpg_sell_clk_register(const struct cpg_core_clk *core,
+			    void __iomem *base, struct rzg2l_cpg_priv *priv)
+{
+	const struct clk_hw *clk_hw;
+
+	clk_hw = clk_hw_register_mux(priv->dev, core->name,
+				     core->parent_names,
+				     core->num_parents,
+				     core->flag == CLK_MUX_READ_ONLY ?
+				     CLK_SET_RATE_PARENT : 0,
+				     base + GET_REG(core->conf),
+				     GET_SHIFT(core->conf),
+				     GET_WIDTH(core->conf),
+				     core->flag, &priv->rmw_lock);
+
+	if (IS_ERR(clk_hw))
+		return NULL;
+
+	return clk_hw->clk;
+}
+
+struct div2_clk {
+	struct clk_hw hw;
+	unsigned int conf;
+	unsigned int confs;
+	const struct clk_div_table *dtable;
+	const struct clk_div_table *dtables;
+	void __iomem *base;
+	struct rzg2l_cpg_priv *priv;
+};
+
+#define to_d2clk(_hw)	container_of(_hw, struct div2_clk, hw)
+
+static unsigned int div2_clock_get_div(unsigned int val,
+				       const struct clk_div_table *t,
+				       unsigned int length)
+{
+	unsigned int i;
+
+	for (i = 0; i <= length; i++)
+		if (val == t[i].val)
+			return t[i].div;
+
+	/* return div=1 if failed */
+	return 1;
+}
+
+static unsigned long
+rzg2l_cpg_div2_clk_recalc_rate(struct clk_hw *hw,
+			       unsigned long parent_rate)
+{
+	struct div2_clk *d2clk = to_d2clk(hw);
+	u32 div, divs, val, vals;
+
+	val = readl(d2clk->base + GET_REG(d2clk->conf));
+	div = DIV_RSMASK(val, GET_SHIFT(d2clk->conf),
+			 (BIT(GET_WIDTH(d2clk->conf)) - 1));
+	div = div2_clock_get_div(div, d2clk->dtable,
+				 (BIT(GET_WIDTH(d2clk->conf)) - 1));
+
+	vals = readl(d2clk->base + GET_REG(d2clk->confs));
+	divs = DIV_RSMASK(val, GET_SHIFT(d2clk->confs),
+			  (BIT(GET_WIDTH(d2clk->confs)) - 1));
+	divs = div2_clock_get_div(divs, d2clk->dtables,
+				  (BIT(GET_WIDTH(d2clk->confs)) - 1));
+
+	div = div * divs;
+
+	return DIV_ROUND_CLOSEST_ULL((u64)parent_rate, div);
+}
+
+static int rzg2l_cpg_div2_clk_determine_rate(struct clk_hw *hw,
+					     struct clk_rate_request *req)
+{
+	unsigned long best_diff = (unsigned long)-1;
+	unsigned int best_div, best_divs, div, divs;
+	struct div2_clk *d2clk = to_d2clk(hw);
+	unsigned int i, j, n, ns;
+	unsigned long diff;
+
+	n = BIT(GET_WIDTH(d2clk->conf)) - 1;
+	ns = BIT(GET_WIDTH(d2clk->confs)) - 1;
+	for (i = 0; i <= n; i++) {
+		for (j = 0; j <= ns; j++) {
+			div = div2_clock_get_div(i, d2clk->dtable, n);
+			divs = div2_clock_get_div(j, d2clk->dtables, ns);
+			diff = abs(req->best_parent_rate - (req->rate * div * divs));
+			if (best_diff > diff) {
+				best_diff = diff;
+				best_div = div;
+				best_divs = divs;
+			}
+		}
+	}
+
+	req->rate = DIV_ROUND_CLOSEST_ULL((u64)req->best_parent_rate, best_div * best_divs);
+	return 0;
+}
+
+static int rzg2l_cpg_div2_clk_set_rate(struct clk_hw *hw,
+				       unsigned long rate,
+				       unsigned long parent_rate)
+{
+	unsigned long best_diff = (unsigned long)-1;
+	struct div2_clk *d2clk = to_d2clk(hw);
+	struct rzg2l_cpg_priv *priv = d2clk->priv;
+	unsigned int div, divs, val, vals, n, ns;
+	unsigned long diff, flags;
+	unsigned int i, j;
+
+	n = BIT(GET_WIDTH(d2clk->conf)) - 1;
+	ns = BIT(GET_WIDTH(d2clk->confs)) - 1;
+	for (i = 0; i <= n; i++) {
+		for (j = 0; j <= ns; j++) {
+			div = div2_clock_get_div(i, d2clk->dtable, n);
+			divs = div2_clock_get_div(j, d2clk->dtables, ns);
+			diff = abs(parent_rate - (rate * div * divs));
+			if (best_diff > diff) {
+				best_diff = diff;
+				val = i;
+				vals = j;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&priv->rmw_lock, flags);
+
+	val = (val << GET_SHIFT(d2clk->conf)) |
+	      (0x1 << (GET_SHIFT(d2clk->conf) + 16));
+	writel(val, d2clk->base + GET_REG(d2clk->conf));
+
+	vals = (vals << GET_SHIFT(d2clk->confs)) |
+	       (0x1 << (GET_SHIFT(d2clk->confs) + 16));
+	writel(vals, d2clk->base + GET_REG(d2clk->confs));
+
+	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops rzg2l_cpg_div2_ops = {
+	.recalc_rate = rzg2l_cpg_div2_clk_recalc_rate,
+	.determine_rate = rzg2l_cpg_div2_clk_determine_rate,
+	.set_rate = rzg2l_cpg_div2_clk_set_rate,
+};
+
+static struct clk * __init
+rzg2l_cpg_div2_clk_register(const struct cpg_core_clk *core,
+			    struct clk **clks,
+			    void __iomem *base,
+			    struct rzg2l_cpg_priv *priv)
+{
+	const struct clk *parent;
+	struct clk_init_data init;
+	struct div2_clk *d2clk;
+	struct device *dev = priv->dev;
+	struct clk *clk;
+	const char *parent_name;
+
+	parent = clks[core->parent & 0xffff];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	d2clk = devm_kzalloc(dev, sizeof(*d2clk), GFP_KERNEL);
+	if (!d2clk) {
+		clk = ERR_PTR(-ENOMEM);
+		return NULL;
+	}
+
+	parent_name = __clk_get_name(parent);
+	init.name = core->name;
+	init.ops = &rzg2l_cpg_div2_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	d2clk->hw.init = &init;
+	d2clk->conf = core->conf;
+	d2clk->confs = core->confs;
+	d2clk->dtable = core->dtable;
+	d2clk->dtables = core->dtables;
+	d2clk->base = base;
+	d2clk->priv = priv;
+
+	clk = clk_register(NULL, &d2clk->hw);
+	if (IS_ERR(clk))
+		kfree(d2clk);
+
+	return clk;
+}
+
+struct pll_clk {
+	struct clk_hw hw;
+	unsigned int stby_conf;
+	unsigned int mon_conf;
+	unsigned int conf;
+	unsigned int type;
+	void __iomem *base;
+	struct rzg2l_cpg_priv *priv;
+};
+
+#define to_pll(_hw)	container_of(_hw, struct pll_clk, hw)
+
+static unsigned long rzg2l_cpg_pll_clk_recalc_rate(struct clk_hw *hw,
+						   unsigned long parent_rate)
+{
+	struct pll_clk *pll_clk = to_pll(hw);
+	struct rzg2l_cpg_priv *priv = pll_clk->priv;
+	unsigned int val1, val2, val3;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+
+	if (pll_clk->type == CLK_TYPE_SAM_PLL) {
+		val1 = readl(priv->base + GET_REG1(pll_clk->conf));
+		val2 = readl(priv->base + GET_REG2(pll_clk->conf));
+		mult = MDIV(val1) + KDIV(val1) / 65536;
+		div = PDIV(val1) * (1 << SDIV(val2));
+	} else if (pll_clk->type == CLK_TYPE_SI_PLL) {
+		val1 = readl(priv->base + GET_REG1(pll_clk->conf));
+		val2 = readl(priv->base + GET_REG2(pll_clk->conf));
+		val3 = readl(priv->base + GET_REG3(pll_clk->conf));
+
+		mult = INITIN(val3) + FRACIN(val2) / (0x1 << 24);
+		div = POSTDIV1(val1) * POSTDIV2(val1) * REFDIV(val1);
+	} else {
+		return 0;
+	}
+
+	return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult, div);
+}
+
+static const struct clk_ops rzg2l_cpg_pll_ops = {
+	.recalc_rate = rzg2l_cpg_pll_clk_recalc_rate,
+};
+
+static struct clk * __init
+rzg2l_cpg_pll_clk_register(const struct cpg_core_clk *core,
+			   struct clk **clks,
+			   void __iomem *base,
+			   struct rzg2l_cpg_priv *priv)
+{
+	struct device *dev = priv->dev;
+	const struct clk *parent;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct pll_clk *pll_clk;
+	struct clk *clk;
+
+	parent = clks[core->parent & 0xffff];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk) {
+		clk = ERR_PTR(-ENOMEM);
+		return NULL;
+	}
+
+	parent_name = __clk_get_name(parent);
+	init.name = core->name;
+	init.ops = &rzg2l_cpg_pll_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll_clk->hw.init = &init;
+	pll_clk->stby_conf = core->stby_conf;
+	pll_clk->mon_conf = core->mon_conf;
+	pll_clk->conf = core->conf;
+	pll_clk->base = base;
+	pll_clk->priv = priv;
+	pll_clk->type = core->type;
+
+	clk = clk_register(NULL, &pll_clk->hw);
+	if (IS_ERR(clk))
+		kfree(pll_clk);
+
+	return clk;
+}
+
+static struct clk
+*rzg2l_cpg_clk_src_twocell_get(struct of_phandle_args *clkspec,
+			       void *data)
+{
+	unsigned int clkidx = clkspec->args[1];
+	struct rzg2l_cpg_priv *priv = data;
+	struct device *dev = priv->dev;
+	const char *type;
+	struct clk *clk;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		type = "core";
+		if (clkidx > priv->last_dt_core_clk) {
+			dev_err(dev, "Invalid %s clock index %u\n", type, clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[clkidx];
+		break;
+
+	case CPG_MOD:
+		type = "module";
+		if (clkidx > priv->num_core_clks + priv->num_mod_clks) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+				clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[priv->num_core_clks + clkidx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid CPG clock type %u\n", clkspec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (IS_ERR(clk))
+		dev_err(dev, "Cannot get %s clock %u: %ld", type, clkidx,
+			PTR_ERR(clk));
+	else
+		dev_dbg(dev, "clock (%u, %u) is %pC at %lu Hz\n",
+			clkspec->args[0], clkspec->args[1], clk,
+			clk_get_rate(clk));
+	return clk;
+}
+
+static void __init
+rzg2l_cpg_register_core_clk(const struct cpg_core_clk *core,
+			    const struct rzg2l_cpg_info *info,
+			    struct rzg2l_cpg_priv *priv)
+{
+	struct clk *clk = ERR_PTR(-EOPNOTSUPP), *parent;
+	struct device *dev = priv->dev;
+	unsigned int id = core->id, div = core->div;
+	const char *parent_name;
+
+	WARN_DEBUG(id >= priv->num_core_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	if (!core->name) {
+		/* Skip NULLified clock */
+		return;
+	}
+
+	switch (core->type) {
+	case CLK_TYPE_IN:
+		clk = of_clk_get_by_name(priv->dev->of_node, core->name);
+		break;
+	case CLK_TYPE_FF:
+		WARN_DEBUG(core->parent >= priv->num_core_clks);
+		parent = priv->clks[core->parent];
+		if (IS_ERR(parent)) {
+			clk = parent;
+			goto fail;
+		}
+
+		parent_name = __clk_get_name(parent);
+		clk = clk_register_fixed_factor(NULL, core->name,
+						parent_name, CLK_SET_RATE_PARENT,
+						core->mult, div);
+		break;
+	case CLK_TYPE_SAM_PLL:
+	case CLK_TYPE_SI_PLL:
+		clk = rzg2l_cpg_pll_clk_register(core, priv->clks,
+						 priv->base, priv);
+		break;
+	case CLK_TYPE_DIV:
+		clk = rzg2l_cpg_div_clk_register(core, priv->clks,
+						 priv->base, priv);
+		break;
+	case CLK_TYPE_2DIV:
+		clk = rzg2l_cpg_div2_clk_register(core, priv->clks,
+						  priv->base, priv);
+		break;
+	case CLK_TYPE_MUX:
+		clk = rzg2l_cpg_sell_clk_register(core, priv->base, priv);
+		break;
+	default:
+		goto fail;
+	};
+
+	if (IS_ERR_OR_NULL(clk))
+		goto fail;
+
+	dev_dbg(dev, "Core clock %pC at %lu Hz\n", clk, clk_get_rate(clk));
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "core",
+		core->name, PTR_ERR(clk));
+}
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @off: register offset
+ * @onoff: ON/MON bits
+ * @reset: reset bits
+ * @priv: CPG/MSTP private data
+ */
+struct mstp_clock {
+	struct clk_hw hw;
+	u16 off;
+	u8 onoff;
+	u8 reset;
+	struct rzg2l_cpg_priv *priv;
+};
+
+#define to_mod_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	struct mstp_clock *clock = to_mod_clock(hw);
+	struct rzg2l_cpg_priv *priv = clock->priv;
+	unsigned int reg = clock->off;
+	struct device *dev = priv->dev;
+	unsigned long flags;
+	unsigned int i;
+	u32 value;
+
+	if (!clock->off) {
+		dev_dbg(dev, "%pC does not support ON/OFF\n",  hw->clk);
+		return 0;
+	}
+
+	dev_dbg(dev, "CLK_ON %u/%pC %s\n", CLK_ON_R(reg), hw->clk,
+		enable ? "ON" : "OFF");
+	spin_lock_irqsave(&priv->rmw_lock, flags);
+
+	if (enable)
+		value = (clock->onoff << 16) | clock->onoff;
+	else
+		value = clock->onoff << 16;
+	writel(value, priv->base + CLK_ON_R(reg));
+
+	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+
+	if (!enable)
+		return 0;
+
+	for (i = 1000; i > 0; --i) {
+		if (((readl(priv->base + CLK_MON_R(reg))) & clock->onoff))
+			break;
+		cpu_relax();
+	}
+
+	if (!i) {
+		dev_err(dev, "Failed to enable CLK_ON %p\n",
+			priv->base + CLK_ON_R(reg));
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int rzg2l_mod_clock_enable(struct clk_hw *hw)
+{
+	return rzg2l_mod_clock_endisable(hw, true);
+}
+
+static void rzg2l_mod_clock_disable(struct clk_hw *hw)
+{
+	rzg2l_mod_clock_endisable(hw, false);
+}
+
+static int rzg2l_mod_clock_is_enabled(struct clk_hw *hw)
+{
+	struct mstp_clock *clock = to_mod_clock(hw);
+	struct rzg2l_cpg_priv *priv = clock->priv;
+	u32 value;
+
+	if (!clock->off) {
+		dev_dbg(priv->dev, "%pC does not support ON/OFF\n",  hw->clk);
+		return 1;
+	}
+
+	value = readl(priv->base + CLK_MON_R(clock->off));
+
+	return !(value & clock->onoff);
+}
+
+static const struct clk_ops rzg2l_mod_clock_ops = {
+	.enable = rzg2l_mod_clock_enable,
+	.disable = rzg2l_mod_clock_disable,
+	.is_enabled = rzg2l_mod_clock_is_enabled,
+};
+
+static void __init
+rzg2l_cpg_register_mod_clk(const struct rzg2l_mod_clk *mod,
+			   const struct rzg2l_cpg_info *info,
+			   struct rzg2l_cpg_priv *priv)
+{
+	struct mstp_clock *clock = NULL;
+	struct device *dev = priv->dev;
+	unsigned int id = mod->id;
+	struct clk_init_data init;
+	struct clk *parent, *clk;
+	const char *parent_name;
+	unsigned int i;
+
+	WARN_DEBUG(id < priv->num_core_clks);
+	WARN_DEBUG(id >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(mod->parent >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	if (!mod->name) {
+		/* Skip NULLified clock */
+		return;
+	}
+
+	parent = priv->clks[mod->parent];
+	if (IS_ERR(parent)) {
+		clk = parent;
+		goto fail;
+	}
+
+	clock = devm_kzalloc(dev, sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		clk = ERR_PTR(-ENOMEM);
+		goto fail;
+	}
+
+	init.name = mod->name;
+	init.ops = &rzg2l_mod_clock_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	for (i = 0; i < info->num_crit_mod_clks; i++)
+		if (id == info->crit_mod_clks[i]) {
+			dev_dbg(dev, "CPG %s setting CLK_IS_CRITICAL\n",
+				mod->name);
+			init.flags |= CLK_IS_CRITICAL;
+			break;
+		}
+
+	parent_name = __clk_get_name(parent);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->off = mod->off;
+	clock->onoff = mod->onoff;
+	clock->reset = mod->reset;
+	clock->priv = priv;
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto fail;
+
+	dev_dbg(dev, "Module clock %pC at %lu Hz\n", clk, clk_get_rate(clk));
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "module",
+		mod->name, PTR_ERR(clk));
+	kfree(clock);
+}
+
+#ifdef CONFIG_RESET_CONTROLLER
+
+#define rcdev_to_priv(x)	container_of(x, struct rzg2l_cpg_priv, rcdev)
+
+static int rzg2l_cpg_reset(struct reset_controller_dev *rcdev,
+			   unsigned long id)
+{
+	struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev);
+	const struct rzg2l_cpg_info *info = priv->info;
+	unsigned int reg = info->mod_clks[id].off;
+	u32 dis = info->mod_clks[id].reset;
+	u32 we = dis << 16;
+
+	dev_dbg(rcdev->dev, "reset name:%s id:%ld offset:0x%x\n",
+		info->mod_clks[id].name, id, CLK_RST_R(reg));
+
+	/* Reset module */
+	writel(we, priv->base + CLK_RST_R(reg));
+
+	/* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
+	udelay(35);
+
+	/* Release module from reset state */
+	writel(we | dis, priv->base + CLK_RST_R(reg));
+
+	return 0;
+}
+
+static int rzg2l_cpg_assert(struct reset_controller_dev *rcdev,
+			    unsigned long id)
+{
+	struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev);
+	const struct rzg2l_cpg_info *info = priv->info;
+	unsigned int reg = info->mod_clks[id].off;
+	u32 value = info->mod_clks[id].reset << 16;
+
+	dev_dbg(rcdev->dev, "assert name:%s id:%ld offset:0x%x\n",
+		info->mod_clks[id].name, id, CLK_RST_R(reg));
+
+	writel(value, priv->base + CLK_RST_R(reg));
+	return 0;
+}
+
+static int rzg2l_cpg_deassert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev);
+	const struct rzg2l_cpg_info *info = priv->info;
+	unsigned int reg = info->mod_clks[id].off;
+	u32 dis = info->mod_clks[id].reset;
+	u32 value = (dis << 16) | dis;
+
+	dev_dbg(rcdev->dev, "deassert name:%s id:%ld offset:0x%x\n",
+		info->mod_clks[id].name, id, CLK_RST_R(reg));
+
+	writel(value, priv->base + CLK_RST_R(reg));
+	return 0;
+}
+
+static int rzg2l_cpg_status(struct reset_controller_dev *rcdev,
+			    unsigned long id)
+{
+	struct rzg2l_cpg_priv *priv = rcdev_to_priv(rcdev);
+	const struct rzg2l_cpg_info *info = priv->info;
+	unsigned int reg = info->mod_clks[id].off;
+	u32 bitmask = info->mod_clks[id].reset;
+
+	return !(readl(priv->base + CLK_MRST_R(reg)) & bitmask);
+}
+
+static const struct reset_control_ops rzg2l_cpg_reset_ops = {
+	.reset = rzg2l_cpg_reset,
+	.assert = rzg2l_cpg_assert,
+	.deassert = rzg2l_cpg_deassert,
+	.status = rzg2l_cpg_status,
+};
+
+static int rzg2l_cpg_reset_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	unsigned int id = reset_spec->args[0];
+
+	if (id >= rcdev->nr_resets) {
+		dev_err(rcdev->dev, "Invalid reset index %u\n", id);
+		return -EINVAL;
+	}
+
+	return id;
+}
+
+static int rzg2l_cpg_reset_controller_register(struct rzg2l_cpg_priv *priv)
+{
+	priv->rcdev.ops = &rzg2l_cpg_reset_ops;
+	priv->rcdev.of_node = priv->dev->of_node;
+	priv->rcdev.dev = priv->dev;
+	priv->rcdev.of_reset_n_cells = 1;
+	priv->rcdev.of_xlate = rzg2l_cpg_reset_xlate;
+	priv->rcdev.nr_resets = priv->num_mod_clks;
+
+	return devm_reset_controller_register(priv->dev, &priv->rcdev);
+}
+
+#else /* !CONFIG_RESET_CONTROLLER */
+static int rzg2l_cpg_reset_controller_register(struct rzg2l_cpg_priv *priv)
+{
+	return 0;
+}
+#endif /* !CONFIG_RESET_CONTROLLER */
+
+static bool rzg2l_cpg_is_pm_clk(const struct of_phandle_args *clkspec)
+{
+	if (clkspec->args_count != 2)
+		return false;
+
+	switch (clkspec->args[0]) {
+	case CPG_MOD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int rzg2l_cpg_attach_dev(struct generic_pm_domain *unused, struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int error;
+	int i = 0;
+
+	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+					   &clkspec)) {
+		if (rzg2l_cpg_is_pm_clk(&clkspec))
+			goto found;
+
+		of_node_put(clkspec.np);
+		i++;
+	}
+
+	return 0;
+
+found:
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	error = pm_clk_create(dev);
+	if (error)
+		goto fail_put;
+
+	error = pm_clk_add_clk(dev, clk);
+	if (error)
+		goto fail_destroy;
+
+	return 0;
+
+fail_destroy:
+	pm_clk_destroy(dev);
+fail_put:
+	clk_put(clk);
+	return error;
+}
+
+static void rzg2l_cpg_detach_dev(struct generic_pm_domain *unused, struct device *dev)
+{
+	if (!pm_clk_no_clocks(dev))
+		pm_clk_destroy(dev);
+}
+
+static int __init rzg2l_cpg_add_clk_domain(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct generic_pm_domain *genpd;
+
+	genpd = devm_kzalloc(dev, sizeof(*genpd), GFP_KERNEL);
+	if (!genpd)
+		return -ENOMEM;
+
+	genpd->name = np->name;
+	genpd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ALWAYS_ON |
+		       GENPD_FLAG_ACTIVE_WAKEUP;
+	genpd->attach_dev = rzg2l_cpg_attach_dev;
+	genpd->detach_dev = rzg2l_cpg_detach_dev;
+	pm_genpd_init(genpd, &pm_domain_always_on_gov, false);
+
+	of_genpd_add_provider_simple(np, genpd);
+	return 0;
+}
+
+static int __init rzg2l_cpg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct rzg2l_cpg_info *info;
+	struct rzg2l_cpg_priv *priv;
+	unsigned int nclks, i;
+	struct clk **clks;
+	int error;
+
+	info = of_device_get_match_data(dev);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->info = info;
+	spin_lock_init(&priv->rmw_lock);
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	nclks = info->num_total_core_clks + info->num_hw_mod_clks;
+	clks = devm_kmalloc_array(dev, nclks, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->clks = clks;
+	priv->num_core_clks = info->num_total_core_clks;
+	priv->num_mod_clks = info->num_hw_mod_clks;
+	priv->last_dt_core_clk = info->last_dt_core_clk;
+
+	for (i = 0; i < nclks; i++)
+		clks[i] = ERR_PTR(-ENOENT);
+
+	for (i = 0; i < info->num_core_clks; i++)
+		rzg2l_cpg_register_core_clk(&info->core_clks[i], info, priv);
+
+	for (i = 0; i < info->num_mod_clks; i++)
+		rzg2l_cpg_register_mod_clk(&info->mod_clks[i], info, priv);
+
+	error = of_clk_add_provider(np, rzg2l_cpg_clk_src_twocell_get, priv);
+	if (error)
+		return error;
+
+	error = devm_add_action_or_reset(dev, rzg2l_cpg_del_clk_provider, np);
+	if (error)
+		return error;
+
+	error = rzg2l_cpg_add_clk_domain(dev);
+	if (error)
+		return error;
+
+	error = rzg2l_cpg_reset_controller_register(priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id rzg2l_cpg_match[] = {
+	{ /* sentinel */ }
+};
+
+static struct platform_driver rzg2l_cpg_driver = {
+	.driver		= {
+		.name	= "rzg2l-cpg",
+		.of_match_table = rzg2l_cpg_match,
+	},
+};
+
+static int __init rzg2l_cpg_init(void)
+{
+	return platform_driver_probe(&rzg2l_cpg_driver, rzg2l_cpg_probe);
+}
+
+subsys_initcall(rzg2l_cpg_init);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L CPG Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.h b/drivers/clk/renesas/renesas-rzg2l-cpg.h
new file mode 100644
index 000000000000..8e7117e7f79b
--- /dev/null
+++ b/drivers/clk/renesas/renesas-rzg2l-cpg.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * RZ/G2L Clock Pulse Generator
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ *
+ */
+
+#ifndef __RENESAS_RZG2L_CPG_H__
+#define __RENESAS_RZG2L_CPG_H__
+
+/* Register offset */
+/* n : 0, 1, 2 : PLL1, PLL4, PLL6 */
+#define PLL146_CLK1_R(n)	(0x04 + (16 * n))
+#define PLL146_CLK2_R(n)	(0x08 + (16 * n))
+#define PLL146_MON_R(n)		(0x0C + (16 * n))
+#define PLL146_STBY_R(n)	(0x00 + (16 * n))
+
+/* n : 0, 1, 2 : PLL2, PLL3, PLL5 */
+#define PLL235_CLK1_R(n)	(0x104 + (32 * n))
+#define PLL235_CLK3_R(n)	(0x10c + (32 * n))
+#define PLL235_CLK4_R(n)	(0x110 + (32 * n))
+#define PLL235_MON_R(n)		(0x11C + (32 * n))
+#define PLL235_STBY_R(n)	(0x100 + (32 * n))
+
+#define PLL1_DIV_R		(0x200)
+#define PLL2_DIV_R		(0x204)
+#define PLL3A_DIV_R		(0x208)
+#define PLL3B_DIV_R		(0x20c)
+#define PLL6_DIV_R		(0x210)
+#define PL2SDHI_SEL_R		(0x218)
+#define CLK_STATUS_R		(0x280)
+#define CA55_SSEL_R		(0x400)
+#define PL2_SSEL_R		(0x404)
+#define PL3_SSEL_R		(0x408)
+#define PL4_DSEL_R		(0x21C)
+#define PL5_SSEL_R		(0x410)
+#define PL6_SSEL_R		(0x414)
+#define PL6_ETH_SSEL_R		(0x418)
+#define PL5_SDIV_R		(0x420)
+#define OTHERFUNC1_R		(0xBE8)
+
+#define SEL_PLL1	(CA55_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL2_1	(PL2_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL2_2	(PL2_SSEL_R << 20 | 4 << 12 | 1 << 8)
+#define SEL_PLL3_1	(PL3_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL3_2	(PL3_SSEL_R << 20 | 4 << 12 | 1 << 8)
+#define SEL_PLL3_3	(PL3_SSEL_R << 20 | 8 << 12 | 1 << 8)
+#define SEL_PLL4	(PL4_DSEL_R << 20 | 8 << 12 | 1 << 8)
+#define SEL_PLL5_1	(PL5_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL5_2	(PL5_SSEL_R << 20 | 4 << 12 | 1 << 8)
+#define SEL_PLL5_3	(PL5_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL5_4	(OTHERFUNC1_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL6_1	(PL6_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_PLL6_2	(PL6_ETH_SSEL_R << 20 | 0 << 12 | 1 << 8)
+#define SEL_ETH		(PL6_ETH_SSEL_R << 20 | 4 << 12 | 1 << 8)
+#define SEL_G1_1	(PL6_SSEL_R << 20 | 4 << 12 | 1 << 8)
+#define SEL_G1_2	(PL6_SSEL_R << 20 | 8 << 12 | 1 << 8)
+#define SEL_G2		(PL6_SSEL_R << 20 | 12 << 12 | 1 << 8)
+#define SEL_SDHI0	(PL2SDHI_SEL_R << 20 | 0 << 12 | 2 << 8)
+#define SEL_SDHI1	(PL2SDHI_SEL_R << 20 | 4 << 12 | 2 << 8)
+#define DIVPL1		(PLL1_DIV_R << 20 | 0 << 12 | 2 << 8)
+#define DIVPL2A		(PLL2_DIV_R << 20 | 0 << 12 | 3 << 8)
+#define DIVPL2B		(PLL2_DIV_R << 20 | 4 << 12 | 3 << 8)
+#define DIVPL2C		(PLL2_DIV_R << 20 | 8 << 12 | 3 << 8)
+#define DIVDSILPCL	(PLL2_DIV_R << 20 | 12 << 12 | 2 << 8)
+#define DIVPL3A		(PLL3A_DIV_R << 20 | 0 << 12 | 3 << 8)
+#define DIVPL3B		(PLL3A_DIV_R << 20 | 4 << 12 | 3 << 8)
+#define DIVPL3C		(PLL3A_DIV_R << 20 | 8 << 12 | 3 << 8)
+#define DIVPL3CLK200FIX	(PLL3B_DIV_R << 20 | 0 << 12 | 3 << 8)
+#define DIVGPU		(PLL6_DIV_R << 20 | 0 << 12 | 2 << 8)
+#define DIVDSIB		(PL5_SDIV_R << 20 | 8 << 12 | 4 << 8)
+#define DIVDSIA		(PL5_SDIV_R << 20 | 0 << 12 | 2 << 8)
+
+#define PLL146_STBY(n)	(PLL146_STBY_R(n) << 20 | 2 << 16 | 0 << 12)
+#define PLL146_MON(n)	(PLL146_MON_R(n) << 20 | 4 << 16 | 0 << 12)
+#define PLL235_STBY(n)	(PLL235_STBY_R(n) << 20 | 2 << 16 | 0 << 12)
+#define PLL235_MON(n)	(PLL235_MON_R(n) << 20 | 4 << 16 | 0 << 12)
+
+#define PLL146_CONF(n)	(PLL146_CLK1_R(n) << 22 | PLL146_CLK2_R(n) << 12 | 0)
+#define PLL235_CONF(n)	(PLL235_CLK1_R(n) << 22 | PLL235_CLK3_R(n) << 12 | PLL235_CLK4_R(n))
+
+/**
+ * Definitions of CPG Core Clocks
+ *
+ * These include:
+ *   - Clock outputs exported to DT
+ *   - External input clocks
+ *   - Internal CPG clocks
+ */
+struct cpg_core_clk {
+	const char *name;
+	unsigned int id;
+	unsigned int parent;
+	unsigned int div;
+	unsigned int mult;
+	unsigned int type;
+	unsigned int conf;
+	const struct clk_div_table *dtable;
+	int flag;
+	const char * const *parent_names;
+	int num_parents;
+
+	/* used for clocks with two configs */
+	unsigned int confs;
+	const struct clk_div_table *dtables;
+	unsigned int stby_conf;
+	unsigned int mon_conf;
+};
+
+enum clk_types {
+	/* Generic */
+	CLK_TYPE_IN,		/* External Clock Input */
+	CLK_TYPE_FF,		/* Fixed Factor Clock */
+	CLK_TYPE_SAM_PLL,
+	CLK_TYPE_SI_PLL,
+
+	/* Clock with divider */
+	CLK_TYPE_DIV,
+	CLK_TYPE_2DIV,
+
+	/* Clock with selector */
+	CLK_TYPE_MUX,
+
+	/* Custom definitions start here */
+	CLK_TYPE_CUSTOM,
+};
+
+#define DEF_TYPE(_name, _id, _type...) \
+	{ .name = _name, .id = _id, .type = _type }
+#define DEF_BASE(_name, _id, _type, _parent...) \
+	DEF_TYPE(_name, _id, _type, .parent = _parent)
+#define DEF_PLL(_name, _id, _type, _parent, _conf, _stby_conf, _mon_conf) \
+	DEF_TYPE(_name, _id, _type, .parent = _parent, .conf = _conf, \
+		 .stby_conf = _stby_conf, .mon_conf = _mon_conf)
+#define DEF_INPUT(_name, _id) \
+	DEF_TYPE(_name, _id, CLK_TYPE_IN)
+#define DEF_FIXED(_name, _id, _parent, _mult, _div) \
+	DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult)
+#define DEF_DIV(_name, _id, _parent, _conf, _dtable, _flag) \
+	DEF_TYPE(_name, _id, CLK_TYPE_DIV, .conf = _conf, \
+		 .parent = _parent, .dtable = _dtable, .flag = _flag)
+#define DEF_MUX(_name, _id, _conf, _parent_names, _num_parents, _flag) \
+	DEF_TYPE(_name, _id, CLK_TYPE_MUX, .conf = _conf, \
+		 .parent_names = _parent_names, \
+		 .num_parents = _num_parents, .flag = _flag)
+/* Clock with two dividers */
+#define DEF_2DIV(_name, _id, _parent, _conf, _confs, _dtable, _dtables, _flag) \
+	DEF_TYPE(_name, _id, CLK_TYPE_2DIV, .parent = _parent, \
+		 .conf = _conf, .confs = _confs, \
+		 .dtable = _dtable, .dtables = _dtables, .flag = _flag)
+
+/**
+ * struct rzg2l_mod_clk - Module Clocks definitions
+ *
+ * @name: handle between common and hardware-specific interfaces
+ * @id: clock index in array containing all Core and Module Clocks
+ * @parent: id of parent clock
+ * @off: register offset
+ * @onoff: ON/MON bits
+ * @reset: reset bits
+ */
+struct rzg2l_mod_clk {
+	const char *name;
+	unsigned int id;
+	unsigned int parent;
+	u16 off;
+	u8 onoff;
+	u8 reset;
+};
+
+#define DEF_MOD(_name, _id, _parent, _off, _onoff, _reset)	\
+	[_id] = { \
+		.name = _name, \
+		.id = MOD_CLK_BASE + _id, \
+		.parent = (_parent), \
+		.off = (_off), \
+		.onoff = (_onoff), \
+		.reset = (_reset) \
+	}
+
+/**
+ * struct rzg2l_cpg_info - SoC-specific CPG Description
+ *
+ * @core_clks: Array of Core Clock definitions
+ * @num_core_clks: Number of entries in core_clks[]
+ * @last_dt_core_clk: ID of the last Core Clock exported to DT
+ * @num_total_core_clks: Total number of Core Clocks (exported + internal)
+ *
+ * @mod_clks: Array of Module Clock definitions
+ * @num_mod_clks: Number of entries in mod_clks[]
+ * @num_hw_mod_clks: Number of Module Clocks supported by the hardware
+ *
+ * @crit_mod_clks: Array with Module Clock IDs of critical clocks that
+ *                 should not be disabled without a knowledgeable driver
+ * @num_crit_mod_clks: Number of entries in crit_mod_clks[]
+ */
+struct rzg2l_cpg_info {
+	/* Core Clocks */
+	const struct cpg_core_clk *core_clks;
+	unsigned int num_core_clks;
+	unsigned int last_dt_core_clk;
+	unsigned int num_total_core_clks;
+
+	/* Module Clocks */
+	const struct rzg2l_mod_clk *mod_clks;
+	unsigned int num_mod_clks;
+	unsigned int num_hw_mod_clks;
+
+	/* Critical Module Clocks that should not be disabled */
+	const unsigned int *crit_mod_clks;
+	unsigned int num_crit_mod_clks;
+};
+
+#endif
-- 
2.17.1

[PATCH v2 09/12] clk: renesas: Add support for R9A07G044 SoC

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:50

Define the clock outputs supported by RZ/G2L (R9A07G044) SoC
and bind it with RZ/G2L CPG core.

Based on a patch in the BSP by Binh Nguyen
[off-list ref].

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/Kconfig             |   5 +
 drivers/clk/renesas/Makefile            |   1 +
 drivers/clk/renesas/r9a07g044-cpg.c     | 372 ++++++++++++++++++++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.c |   6 +
 drivers/clk/renesas/renesas-rzg2l-cpg.h |   2 +
 5 files changed, 386 insertions(+)
 create mode 100644 drivers/clk/renesas/r9a07g044-cpg.c
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 5a0d934f43a4..d1fc44fe755d 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -32,6 +32,7 @@ config CLK_RENESAS
 	select CLK_R8A77995 if ARCH_R8A77995
 	select CLK_R8A779A0 if ARCH_R8A779A0
 	select CLK_R9A06G032 if ARCH_R9A06G032
+	select CLK_R9A07G044 if ARCH_R9A07G044
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -156,6 +157,10 @@ config CLK_R9A06G032
 	help
 	  This is a driver for R9A06G032 clocks
 
+config CLK_R9A07G044
+	bool "RZ/G2L clock support" if COMPILE_TEST
+	select CLK_RZG2L
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index a9c299686b4a..5c6c5c721d98 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CLK_R8A77990)		+= r8a77990-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A779A0)		+= r8a779a0-cpg-mssr.o
 obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
+obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
new file mode 100644
index 000000000000..9a481d01cf69
--- /dev/null
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZ/G2L CPG driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+#include "renesas-rzg2l-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R9A07G044_OSCCLK,
+
+	/* External Input Clocks */
+	CLK_XINCLK,
+
+	/* Internal Core Clocks */
+	CLK_OSC_DIV1000,
+	CLK_PLL1,
+	CLK_SEL_PLL1,
+	CLK600,
+	CLK_PLL2,
+	CLK_PLL2_1,
+	CLK_SEL_PLL2_1,
+	CLK800FIX_C,
+	CLK800FIX_CDIV2,
+	CLK200FIX_C,
+	CLK200_C,
+	CLK100FIX_C,
+	CLK_PLL2_2,
+	CLK_SEL_PLL2_2,
+	CLK533_C,
+	CLK533_CDIV2,
+	CLK533FIX_C,
+	CLK533FIX_CDIV2,
+	CLK533FIX_LPCLK,
+	CLK_PLL3,
+	CLK_PLL3_1,
+	CLK_SEL_PLL3_1,
+	CLK800FIX_CD,
+	CLK800FIX_DIV2,
+	CLK200FIX_CD,
+	CLK200_CD,
+	CLK100FIX_CD,
+	CLK100_CD,
+	CLK_PLL3_2,
+	CLK_SEL_PLL3_2,
+	CLK_PLL3_3,
+	CLK_SEL_PLL3_3,
+	CLK533_CD,
+	CLK533FIX_CD,
+	CLK_PLL4,
+	CLK_SEL_PLL4,
+	CLK_PLL5,
+	CLK_PLL5_1,
+	CLK_SEL_PLL5_1,
+	CLK_PLL5_3,
+	CLK_SEL_PLL5_3,
+	CLK_PLL5_2,
+	CLK_SEL_PLL5_2,
+	CLK_SEL_PLL5_4,
+	CLK_250,
+	CLK_PLL6,
+	CLK_PLL6_1,
+	CLK_SEL_PLL6_1,
+	CLK_SEL_G1_1,
+	CLK_SEL_G1_2,
+	CLK_SEL_G2,
+	CLK_PLL6_DIV2,
+	CLK_SEL_PLL6_2,
+
+	/* Module Clocks */
+	MOD_CLK_BASE,
+};
+
+/* Divider tables */
+static const struct clk_div_table divdsilpcl[] = {
+	{0, 16},
+	{1, 32},
+	{2, 64},
+	{3, 128},
+};
+
+static const struct clk_div_table dtable_2b[] = {
+	{0, 1},
+	{1, 2},
+	{2, 4},
+	{3, 8},
+};
+
+static const struct clk_div_table dtable_3b[] = {
+	{0, 1},
+	{1, 2},
+	{2, 4},
+	{3, 8},
+	{4, 32},
+};
+
+static const struct clk_div_table dtable_4b[] = {
+	{0, 1},
+	{1, 2},
+	{2, 3},
+	{3, 4},
+	{4, 5},
+	{5, 6},
+	{6, 7},
+	{7, 8},
+	{8, 9},
+	{9, 10},
+	{10, 11},
+	{11, 12},
+	{12, 13},
+	{13, 14},
+	{14, 15},
+	{15, 16},
+};
+
+/* MUX clock tables */
+static const char * const sel_pll1[]	= { "xinclk", ".pll1" };
+static const char * const sel_pll2_1[]	= { "xinclk", ".pll2_1" };
+static const char * const sel_pll2_2[]	= { "xinclk", ".pll2_2" };
+static const char * const sel_pll3_1[]	= { "xinclk", ".pll3_1" };
+static const char * const sel_pll3_2[]	= { "xinclk", ".pll3_2" };
+static const char * const sel_pll3_3[]	= { ".sel_pll3_2", ".pll3_3" };
+static const char * const sel_pll4[]	= { ".osc_div1000", ".pll4" };
+static const char * const sel_pll5_1[]	= { "xinclk", ".pll5_1" };
+static const char * const sel_pll5_3[]	= { "xinclk", ".pll5_3" };
+static const char * const sel_pll5_4[]	= { ".sel_pll5_1", ".sel_pll5_3" };
+static const char * const sel_pll5_2[]	= { "xinclk", ".pll5_2" };
+static const char * const sel_pll6_1[]	= { "xinclk", ".pll6" };
+static const char * const sel_g1_1[]	= { ".sel_pll6_1", ".clk600" };
+static const char * const sel_g1_2[]	= { ".clk533fix_cd", ".clk800fix_div2" };
+static const char * const sel_g2[]	= { ".sel_g1_1", ".sel_g1_2" };
+static const char * const sel_pll6_2[]	= { ".pll6_div2", ".clk250" };
+static const char * const sel_eth[]	= { "xinclk", ".sel_pll6_2" };
+static const char * const sel_shdi[]	= { ".clk800fix_c", ".clk533_c",
+					    ".clk800fix_cdiv2", ".clk533_cdiv2" };
+
+static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",	 CLK_XINCLK),
+
+	/* Internal Core Clocks */
+	DEF_FIXED(".osc", R9A07G044_OSCCLK, CLK_XINCLK, 1, 1),
+	DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_XINCLK, 1, 1000),
+	DEF_PLL(".pll1", CLK_PLL1, CLK_TYPE_SAM_PLL, CLK_XINCLK,
+		PLL146_CONF(0), PLL146_STBY(0), PLL146_MON(0)),
+	DEF_PLL(".pll2", CLK_PLL2, CLK_TYPE_SI_PLL, CLK_XINCLK,
+		PLL235_CONF(0), PLL235_STBY(0), PLL235_MON(0)),
+	DEF_PLL(".pll3", CLK_PLL3, CLK_TYPE_SI_PLL, CLK_XINCLK,
+		PLL235_CONF(1), PLL235_STBY(1), PLL235_MON(1)),
+	DEF_PLL(".pll4", CLK_PLL4, CLK_TYPE_SAM_PLL, CLK_XINCLK,
+		PLL146_CONF(1), PLL146_STBY(1), PLL146_MON(1)),
+	DEF_PLL(".pll5", CLK_PLL5, CLK_TYPE_SI_PLL, CLK_XINCLK,
+		PLL235_CONF(2), PLL235_STBY(2), PLL235_MON(2)),
+	DEF_PLL(".pll6", CLK_PLL6, CLK_TYPE_SAM_PLL, CLK_XINCLK,
+		PLL146_CONF(2), PLL146_STBY(2), PLL146_MON(2)),
+	DEF_MUX(".sel_pll1", CLK_SEL_PLL1, SEL_PLL1,
+		sel_pll1, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".clk600", CLK600, CLK_PLL1, 1, 2),
+	DEF_FIXED(".pll2_1", CLK_PLL2_1, CLK_PLL2, 1, 2),
+	DEF_MUX(".sel_pll2_1", CLK_SEL_PLL2_1, SEL_PLL2_1,
+		sel_pll2_1, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".clk800fix_c", CLK800FIX_C, CLK_SEL_PLL2_1, 1, 2),
+	DEF_FIXED(".clk800fix_cdiv2", CLK800FIX_CDIV2, CLK800FIX_C, 1, 2),
+	DEF_FIXED(".clk200fix_c", CLK200FIX_C, CLK800FIX_C, 1, 4),
+	DEF_DIV(".clk200_c", CLK200_C, CLK200FIX_C,
+		DIVPL2B, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_FIXED(".clk100fix_c", CLK100FIX_C, CLK200FIX_C, 1, 2),
+	DEF_FIXED(".pll2_2", CLK_PLL2_2, CLK_PLL2, 1, 6),
+	DEF_MUX(".sel_pll2_2", CLK_SEL_PLL2_2, SEL_PLL2_2,
+		sel_pll2_2, 2, CLK_MUX_READ_ONLY),
+	DEF_DIV(".clk533_c", CLK533_C, CLK_SEL_PLL2_2,
+		DIVPL2C, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_FIXED(".clk533_cdiv2", CLK533_CDIV2, CLK533_C, 1, 2),
+	DEF_FIXED(".clk533fix_c", CLK533FIX_C, CLK_SEL_PLL2_2, 1, 1),
+	DEF_FIXED(".clk533fix_cdiv2", CLK533FIX_CDIV2, CLK533FIX_C, 1, 2),
+	DEF_FIXED(".clk533fix_lpclk", CLK533FIX_LPCLK, CLK533FIX_C, 1, 2),
+	DEF_FIXED(".pll3_1", CLK_PLL3_1, CLK_PLL3, 1, 2),
+	DEF_MUX(".sel_pll3_1", CLK_SEL_PLL3_1, SEL_PLL3_1,
+		sel_pll3_1, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".clk800fix_cd", CLK800FIX_CD, CLK_SEL_PLL3_1, 1, 2),
+	DEF_FIXED(".clk800fix_div2", CLK800FIX_DIV2, CLK800FIX_CD, 1, 2),
+	DEF_FIXED(".clk200fix_cd", CLK200FIX_CD, CLK800FIX_CD, 1, 4),
+	DEF_FIXED(".clk100fix_cd", CLK100FIX_CD, CLK200FIX_CD, 1, 2),
+	DEF_FIXED(".pll3_2", CLK_PLL3_2, CLK_PLL3, 1, 6),
+	DEF_MUX(".sel_pll3_2", CLK_SEL_PLL3_2, SEL_PLL3_2,
+		sel_pll3_2, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".pll3_3", CLK_PLL3_3, CLK_PLL3, 1, 8),
+	DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
+		sel_pll3_3, 2, CLK_MUX_READ_ONLY),
+	DEF_DIV(".clk533_cd", CLK533_CD, CLK_SEL_PLL3_3,
+		DIVPL3C, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_FIXED(".clk533fix_cd", CLK533FIX_CD, CLK_SEL_PLL3_2, 1, 1),
+	DEF_MUX(".sel_pll4", CLK_SEL_PLL4, SEL_PLL4, sel_pll4, 2, 0),
+	DEF_FIXED(".pll5_1", CLK_PLL5_1, CLK_PLL5, 1, 1),
+	DEF_MUX(".sel_pll5_1", CLK_SEL_PLL5_1, SEL_PLL5_1,
+		sel_pll5_1, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".pll5_3", CLK_PLL5_3, CLK_PLL5, 1, 2),
+	DEF_MUX(".sel_pll5_3", CLK_SEL_PLL5_3, SEL_PLL5_3,
+		sel_pll5_3, 2, CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_pll5_4", CLK_SEL_PLL5_4, SEL_PLL5_4,
+		sel_pll5_4, 2, 0),
+	DEF_FIXED(".pll5_2", CLK_PLL5_2, CLK_PLL5, 1, 6),
+	DEF_MUX(".sel_pll5_2", CLK_SEL_PLL5_2, SEL_PLL5_2,
+		sel_pll5_2, 2, CLK_MUX_READ_ONLY),
+	DEF_FIXED(".clk250", CLK_250, CLK_SEL_PLL5_2, 1, 2),
+	DEF_MUX(".sel_pll6_1", CLK_SEL_PLL6_1, SEL_PLL6_1,
+		sel_pll6_1, 2, CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_g1_1", CLK_SEL_G1_1, SEL_G1_1,
+		sel_g1_1, 2, CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_g1_2", CLK_SEL_G1_2, SEL_G1_2,
+		sel_g1_2, 2, CLK_MUX_READ_ONLY),
+	DEF_MUX(".sel_g2", CLK_SEL_G2, SEL_G2, sel_g2, 2, 0),
+	DEF_FIXED(".pll6_div2", CLK_PLL6_DIV2, CLK_PLL6, 1, 2),
+	DEF_MUX(".sel_pll6_2", CLK_SEL_PLL6_2, SEL_PLL6_2,
+		sel_pll6_2, 2, CLK_MUX_HIWORD_MASK),
+
+	/* Core output clk*/
+	DEF_DIV("I", R9A07G044_CLK_I, CLK_SEL_PLL1,
+		DIVPL1, NULL, CLK_DIVIDER_POWER_OF_TWO |
+		CLK_DIVIDER_HIWORD_MASK),
+	DEF_DIV("I2", R9A07G044_CLK_I2, CLK200FIX_CD,
+		DIVPL3CLK200FIX, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_DIV("G", R9A07G044_CLK_G, CLK_SEL_G2, DIVGPU, NULL,
+		CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_HIWORD_MASK),
+	DEF_FIXED("S0", R9A07G044_CLK_S0, CLK_SEL_PLL4, 1, 2),
+	DEF_FIXED("S1", R9A07G044_CLK_S0, CLK_SEL_PLL4, 1, 4),
+	DEF_FIXED("SPI0", R9A07G044_CLK_SPI0, CLK533_CD, 1, 2),
+	DEF_FIXED("SPI1", R9A07G044_CLK_SPI1, CLK533_CD, 1, 4),
+	DEF_MUX("SD0", R9A07G044_CLK_SD0, SEL_SDHI0,
+		sel_shdi, 4, CLK_MUX_HIWORD_MASK),
+	DEF_MUX("SD1", R9A07G044_CLK_SD1, SEL_SDHI1,
+		sel_shdi, 4, CLK_MUX_HIWORD_MASK),
+	DEF_FIXED("M0", R9A07G044_CLK_M0, CLK200FIX_CD, 1, 1),
+	DEF_FIXED("M1", R9A07G044_CLK_M1, CLK_SEL_PLL5_1, 1, 1),
+	DEF_FIXED("M2", R9A07G044_CLK_M2, CLK533FIX_CD, 1, 2),
+	DEF_2DIV("M3", R9A07G044_CLK_M3, CLK_SEL_PLL5_4,
+		 DIVDSIA, DIVDSIB, dtable_2b, dtable_4b, 0),
+	DEF_DIV("M4", R9A07G044_CLK_M4, CLK533FIX_LPCLK, DIVDSILPCL,
+		divdsilpcl, CLK_DIVIDER_HIWORD_MASK),
+	DEF_MUX("HP", R9A07G044_CLK_HP, SEL_ETH, sel_eth, 2, CLK_MUX_HIWORD_MASK),
+	DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK800FIX_C, 1, 10),
+	DEF_FIXED("ZT", R9A07G044_CLK_ZT, CLK100FIX_CD, 1, 1),
+	DEF_DIV("P0", R9A07G044_CLK_P0, CLK100FIX_C, DIVPL2A,
+		dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_DIV("P1", R9A07G044_CLK_P1, CLK200FIX_CD,
+		DIVPL3B, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_DIV("P2", R9A07G044_CLK_P2, CLK100FIX_CD,
+		DIVPL3A, dtable_3b, CLK_DIVIDER_HIWORD_MASK),
+	DEF_FIXED("AT", R9A07G044_CLK_AT, CLK800FIX_CD, 1, 2),
+};
+
+static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
+	DEF_MOD("gic",		R9A07G044_CLK_GIC600,
+				R9A07G044_CLK_P1,
+				0x514, BIT(0), (BIT(0) | BIT(1))),
+	DEF_MOD("ia55",		R9A07G044_CLK_IA55,
+				R9A07G044_CLK_P1,
+				0x518, (BIT(0) | BIT(1)), BIT(0)),
+	DEF_MOD("syc",		R9A07G044_CLK_SYC,
+				CLK_XINCLK,
+				0x528, BIT(0), BIT(0)),
+	DEF_MOD("dmac",		R9A07G044_CLK_DMAC,
+				R9A07G044_CLK_P1,
+				0x52c, (BIT(0) | BIT(1)),
+				(BIT(0) | BIT(1))),
+	DEF_MOD("sysc",		R9A07G044_CLK_SYSC,
+				CLK_XINCLK,
+				0x530, (BIT(0) | BIT(1)),
+				(BIT(0) | BIT(1) | BIT(2))),
+	DEF_MOD("ssi0",		R9A07G044_CLK_SSI0,
+				R9A07G044_CLK_P0,
+				0x570, (BIT(0) | BIT(1)), BIT(0)),
+	DEF_MOD("ssi1",		R9A07G044_CLK_SSI1,
+				R9A07G044_CLK_P0,
+				0x570, (BIT(2) | BIT(3)), BIT(1)),
+	DEF_MOD("ssi2",		R9A07G044_CLK_SSI2,
+				R9A07G044_CLK_P0,
+				0x570, (BIT(4) | BIT(5)), BIT(2)),
+	DEF_MOD("ssi3",		R9A07G044_CLK_SSI3,
+				R9A07G044_CLK_P0,
+				0x570, (BIT(6) | BIT(7)), BIT(3)),
+	DEF_MOD("src",		R9A07G044_CLK_SRC,
+				R9A07G044_CLK_P0,
+				0x574, BIT(0), BIT(0)),
+	DEF_MOD("usb0",		R9A07G044_CLK_USB0,
+				R9A07G044_CLK_P1,
+				0x578, (BIT(0) | BIT(2) | BIT(3)),
+				(BIT(0) | BIT(2) | BIT(3))),
+	DEF_MOD("usb1",		R9A07G044_CLK_USB1,
+				R9A07G044_CLK_P1,
+				0x578, (BIT(1) | BIT(3)),
+				(BIT(1) | BIT(3))),
+	DEF_MOD("eth0",		R9A07G044_CLK_ETH0,
+				R9A07G044_CLK_HP,
+				0x57c, BIT(0), BIT(0)),
+	DEF_MOD("eth1",		R9A07G044_CLK_ETH1,
+				R9A07G044_CLK_HP,
+				0x57c, BIT(1), BIT(1)),
+	DEF_MOD("i2c0",		R9A07G044_CLK_I2C0,
+				R9A07G044_CLK_P0,
+				0x580, BIT(0), BIT(0)),
+	DEF_MOD("i2c1",		R9A07G044_CLK_I2C1,
+				R9A07G044_CLK_P0,
+				0x580, BIT(1), BIT(1)),
+	DEF_MOD("i2c2",		R9A07G044_CLK_I2C2,
+				R9A07G044_CLK_P0,
+				0x580, BIT(2), BIT(2)),
+	DEF_MOD("i2c3",		R9A07G044_CLK_I2C3,
+				R9A07G044_CLK_P0,
+				0x580, BIT(3), BIT(3)),
+	DEF_MOD("scif0",	R9A07G044_CLK_SCIF0,
+				R9A07G044_CLK_P0,
+				0x584, BIT(0), BIT(0)),
+	DEF_MOD("scif1",	R9A07G044_CLK_SCIF1,
+				R9A07G044_CLK_P0,
+				0x584, BIT(1), BIT(1)),
+	DEF_MOD("scif2",	R9A07G044_CLK_SCIF2,
+				R9A07G044_CLK_P0,
+				0x584, BIT(2), BIT(2)),
+	DEF_MOD("scif3",	R9A07G044_CLK_SCIF3,
+				R9A07G044_CLK_P0,
+				0x584, BIT(3), BIT(3)),
+	DEF_MOD("scif4",	R9A07G044_CLK_SCIF4,
+				R9A07G044_CLK_P0,
+				0x584, BIT(4), BIT(4)),
+	DEF_MOD("sci0",		R9A07G044_CLK_SCI0,
+				R9A07G044_CLK_P0,
+				0x588, BIT(0), BIT(0)),
+	DEF_MOD("sci1",		R9A07G044_CLK_SCI1,
+				R9A07G044_CLK_P0,
+				0x588, BIT(1), BIT(1)),
+	DEF_MOD("canfd",	R9A07G044_CLK_CANFD,
+				R9A07G044_CLK_P0,
+				0x594, BIT(0), (BIT(0) | BIT(1))),
+	DEF_MOD("gpio",		R9A07G044_CLK_GPIO,
+				CLK_XINCLK,
+				0x598, BIT(0),
+				(BIT(0) | BIT(1) | BIT(2))),
+	DEF_MOD("adc",		R9A07G044_CLK_ADC,
+				R9A07G044_CLK_TSU,
+				0x5a8, (BIT(0) | BIT(1)), (BIT(0) | BIT(1))),
+};
+
+static const unsigned int r9a07g044_crit_mod_clks[] __initconst = {
+	MOD_CLK_BASE + R9A07G044_CLK_GIC600,
+};
+
+const struct rzg2l_cpg_info r9a07g044_cpg_info = {
+	/* Core Clocks */
+	.core_clks = r9a07g044_core_clks,
+	.num_core_clks = ARRAY_SIZE(r9a07g044_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r9a07g044_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r9a07g044_crit_mod_clks),
+
+	/* Module Clocks */
+	.mod_clks = r9a07g044_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r9a07g044_mod_clks),
+	.num_hw_mod_clks = R9A07G044_CLK_MIPI_DSI_PIN + 1,
+};
diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.c b/drivers/clk/renesas/renesas-rzg2l-cpg.c
index f096b9d0548c..05e6d61128d6 100644
--- a/drivers/clk/renesas/renesas-rzg2l-cpg.c
+++ b/drivers/clk/renesas/renesas-rzg2l-cpg.c
@@ -952,6 +952,12 @@ static int __init rzg2l_cpg_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id rzg2l_cpg_match[] = {
+#ifdef CONFIG_CLK_R9A07G044
+	{
+		.compatible = "renesas,r9a07g044-cpg",
+		.data = &r9a07g044_cpg_info,
+	},
+#endif
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.h b/drivers/clk/renesas/renesas-rzg2l-cpg.h
index 8e7117e7f79b..de49de9b2383 100644
--- a/drivers/clk/renesas/renesas-rzg2l-cpg.h
+++ b/drivers/clk/renesas/renesas-rzg2l-cpg.h
@@ -212,4 +212,6 @@ struct rzg2l_cpg_info {
 	unsigned int num_crit_mod_clks;
 };
 
+extern const struct rzg2l_cpg_info r9a07g044_cpg_info;
+
 #endif
-- 
2.17.1

[PATCH v2 10/12] serial: sh-sci: Add support for RZ/G2L SoC

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:53

From: Biju Das <biju.das.jz@bp.renesas.com>

Add serial support for RZ/G2L SoC with earlycon and
extended mode register support.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/tty/serial/sh-sci.c | 12 +++++++++++-
 drivers/tty/serial/sh-sci.h |  1 +
 2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ef37fdf37612..798ccd88251f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -289,7 +289,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 	},
 
 	/*
-	 * The "SCIFA" that is in RZ/T and RZ/A2.
+	 * The "SCIFA" that is in RZ/A2, RZ/G2L and RZ/T.
 	 * It looks like a normal SCIF with FIFO data, but with a
 	 * compressed address space. Also, the break out of interrupts
 	 * are different: ERI/BRI, RXI, TXI, TEI, DRI.
@@ -306,6 +306,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 			[SCFDR]		= { 0x0E, 16 },
 			[SCSPTR]	= { 0x10, 16 },
 			[SCLSR]		= { 0x12, 16 },
+			[SEMR]		= { 0x14, 8 },
 		},
 		.fifosize = 16,
 		.overrun_reg = SCLSR,
@@ -2514,6 +2515,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_cflag & PARENB)
 		bits++;
 
+	if (sci_getreg(port, SEMR)->size)
+		serial_port_out(port, SEMR, 0);
+
 	if (best_clk >= 0) {
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 			switch (srr + 1) {
@@ -3170,6 +3174,10 @@ static const struct of_device_id of_sci_match[] = {
 		.compatible = "renesas,scif-r7s9210",
 		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
 	},
+	{
+		.compatible = "renesas,scif-r9a07g044",
+		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+	},
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",
@@ -3452,6 +3460,7 @@ static int __init rzscifa_early_console_setup(struct earlycon_device *device,
 	port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE;
 	return early_console_setup(device, PORT_SCIF);
 }
+
 static int __init scifa_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
@@ -3471,6 +3480,7 @@ static int __init hscif_early_console_setup(struct earlycon_device *device,
 OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
 OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
 OF_EARLYCON_DECLARE(scif, "renesas,scif-r7s9210", rzscifa_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif-r9a07g044", rzscifa_early_console_setup);
 OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
 OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
 OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index c0dfe4382898..c0ae78632dda 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -31,6 +31,7 @@ enum {
 	SCCKS,				/* BRG Clock Select Register */
 	HSRTRGR,			/* Rx FIFO Data Count Trigger Register */
 	HSTTRGR,			/* Tx FIFO Data Count Trigger Register */
+	SEMR,				/* Serial extended mode register */
 
 	SCIx_NR_REGS,
 };
-- 
2.17.1

Re: [PATCH v2 10/12] serial: sh-sci: Add support for RZ/G2L SoC

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-08 15:03:36

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
From: Biju Das <biju.das.jz@bp.renesas.com>

Add serial support for RZ/G2L SoC with earlycon and
extended mode register support.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
FTR,
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:18:58

Add initial DTSI for RZ/G2{L,LC} SoC's.

File structure:
r9a07g044.dtsi  => RZ/G2L family SoC common parts
r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi   | 119 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi |  25 ++++
 2 files changed, 144 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
new file mode 100644
index 000000000000..b2dbf6543d98
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g044";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_CLK_SCIF0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g044-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
new file mode 100644
index 000000000000..02f6da806696
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L1 common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
-- 
2.17.1

RE: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's

From: Biju Das <biju.das.jz@bp.renesas.com>
Date: 2021-06-04 13:54:58

Hi Prabhakar,

Thanks for the patch.
quoted hunk
Subject: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for
RZ/G2{L,LC} SoC's

Add initial DTSI for RZ/G2{L,LC} SoC's.

File structure:
r9a07g044.dtsi  => RZ/G2L family SoC common parts r9a07g044l1.dtsi =>
Specific to RZ/G2L (R9A07G044L single cortex A55) SoC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi   | 119 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi |  25 ++++
 2 files changed, 144 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
new file mode 100644
index 000000000000..b2dbf6543d98
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g044";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_CLK_SCIF0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g044-cpg";
+			reg = <0 0x11010000 0 0x10000>;
What about WDTOVF_RST(0xB10) and WDTRST_SEL(0xB14) registers, this registers to be handled by WDT driver.
Unfortunately it is in CPG block.

So do we need to map the entire CPG registers or up to 0xB00?

Geert, Prabhakar: Any thoughts?

Cheers,
Biju
quoted hunk
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
new file mode 100644
index 000000000000..02f6da806696
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L1 common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1)
| IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
--
2.17.1

Re: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-09 07:01:54

Hi Biju,

On Fri, Jun 4, 2021 at 3:55 PM Biju Das [off-list ref] wrote:
quoted
Subject: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for
RZ/G2{L,LC} SoC's

Add initial DTSI for RZ/G2{L,LC} SoC's.

File structure:
r9a07g044.dtsi  => RZ/G2L family SoC common parts r9a07g044l1.dtsi =>
Specific to RZ/G2L (R9A07G044L single cortex A55) SoC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
quoted
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
quoted
+             cpg: clock-controller@11010000 {
+                     compatible = "renesas,r9a07g044-cpg";
+                     reg = <0 0x11010000 0 0x10000>;
What about WDTOVF_RST(0xB10) and WDTRST_SEL(0xB14) registers, this registers to be handled by WDT driver.
Unfortunately it is in CPG block.

So do we need to map the entire CPG registers or up to 0xB00?

Geert, Prabhakar: Any thoughts?
As the registers are part of the CPG block, I think they should be
covered by the CPG node.  You can handle them in the CPG driver, through
functions called from the WDT driver (cfr. rcar_rst_read_mode_pins()).

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's

From: Biju Das <biju.das.jz@bp.renesas.com>
Date: 2021-06-09 07:08:36

Hi Geert,

Thanks for the feedback.
Subject: Re: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for
RZ/G2{L,LC} SoC's

Hi Biju,

On Fri, Jun 4, 2021 at 3:55 PM Biju Das [off-list ref]
wrote:
quoted
quoted
Subject: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for
RZ/G2{L,LC} SoC's

Add initial DTSI for RZ/G2{L,LC} SoC's.

File structure:
r9a07g044.dtsi  => RZ/G2L family SoC common parts r9a07g044l1.dtsi
=> Specific to RZ/G2L (R9A07G044L single cortex A55) SoC

Signed-off-by: Lad Prabhakar
[off-list ref]
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
quoted
quoted
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
quoted
quoted
+             cpg: clock-controller@11010000 {
+                     compatible = "renesas,r9a07g044-cpg";
+                     reg = <0 0x11010000 0 0x10000>;
What about WDTOVF_RST(0xB10) and WDTRST_SEL(0xB14) registers, this
registers to be handled by WDT driver.
quoted
Unfortunately it is in CPG block.

So do we need to map the entire CPG registers or up to 0xB00?

Geert, Prabhakar: Any thoughts?
As the registers are part of the CPG block, I think they should be covered
by the CPG node.  You can handle them in the CPG driver, through functions
called from the WDT driver (cfr. rcar_rst_read_mode_pins()).
Got it. Similar case for WDTCTRL register to stop watchdog. This register is in SYSC block. So
we need to handle this register in SYSC driver.

Cheers,
Biju

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
m68k.org

In personal conversations with technical people, I call myself a hacker.
But when I'm talking to journalists I just say "programmer" or something
like that.
                                -- Linus Torvalds

Re: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-09 06:52:51

Hi Prabhakar,

On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar
[off-list ref] wrote:
Add initial DTSI for RZ/G2{L,LC} SoC's.

File structure:
r9a07g044.dtsi  => RZ/G2L family SoC common parts
r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi   | 119 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi |  25 ++++
 2 files changed, 144 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
Don't you still want an r9a07g044l2.dtsi, for symmetry, and to add the
"renesas,r9a07g044l2" root compatible value?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-06-03 22:19:02

Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2):
- memory
- External input clock
- SCIF

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../boot/dts/renesas/r9a07g044l2-smarc.dts    | 21 +++++++++++++++
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  | 27 +++++++++++++++++++
 3 files changed, 50 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index f2de2fa0c8b8..68e30e26564b 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -62,3 +62,5 @@ dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
new file mode 100644
index 000000000000..de2b86cac577
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
new file mode 100644
index 000000000000..adcd4f50519e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
-- 
2.17.1

Re: [PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-06-09 07:18:07

Hi Prabhakar,

On Fri, Jun 4, 2021 at 12:19 AM Lad Prabhakar
[off-list ref] wrote:
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2):
- memory
- External input clock
- SCIF

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
quoted hunk
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
So this should include r9a07g044l2.dtsi.

The rest looks fine, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK

From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date: 2021-06-09 07:56:50

Hi Geert,

Thank you for the review.

On Wed, Jun 9, 2021 at 8:18 AM Geert Uytterhoeven [off-list ref] wrote:
Hi Prabhakar,

On Fri, Jun 4, 2021 at 12:19 AM Lad Prabhakar
[off-list ref] wrote:
quoted
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2):
- memory
- External input clock
- SCIF

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
quoted
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
So this should include r9a07g044l2.dtsi.
Good point I'll create an empty r9a07g044l2.dtsi file including
"r9a07g044.dtsi '' along with the compatible value and include it
here.

Cheers,
Prabhakar
The rest looks fine, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v2 00/12] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support

From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date: 2021-06-07 11:01:41

Hi Geert,

On Thu, Jun 3, 2021 at 11:18 PM Lad Prabhakar
[off-list ref] wrote:
Hi All,

This patch series adds initial support for Renesas RZ/G2L SoC and
Renesas RZ/G2L SMARC EVK.

Initial patches enables minimal peripherals on Renesas RZ/G2L
SMARC EVK and booted via initramfs.
* Documentation for RZ/G2{L,LC,UL} SoC variants
* SoC identification support
* CPG core support
* Minimal SoC DTSi
* Minimal DTS for SMARC EVK

Changes for v2:
* Included type-2 RZ/G2Ul SoC in binding doc
* Added single entry for SMARC EVK "renesas,smarc-evk"
* Renamed ARCH_R9A07G044L to ARCH_R9A07G044 and
  dropped ARCH_R9A07G044LC config
* Dropped SoC identification changes will post them as
  separate patch.
* Updated comment in sh-sci.c
* Binding documentation patch for serial driver has been
  accepted so dropped the patch from this series
* Incorporated changes requested by Geert for CPG core
* Fixed dtbs_check errors
* Dropped 'clock-names'/'clocks'/'power-domains'/'resets'
  properties from GIC node and will include them in a separate
  patch along with arm,gic-v3.yaml binding updates
* Included ACK's from Rob

Patches are based on top of [1] master branch.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/

Cheers,
Prabhakar

Biju Das (1):
  serial: sh-sci: Add support for RZ/G2L SoC

Lad Prabhakar (11):
  dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  dt-bindings: arm: renesas: Document SMARC EVK
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  arm64: defconfig: Enable ARCH_R9A07G044
  clk: renesas: Define RZ/G2L CPG Clock Definitions
  dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  clk: renesas: Add support for R9A07G044 SoC
  arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
Biju pointed out USB/ADC isn't working with the current implementation
on upstream kernel, I'll have to re-structure to accommodate this
use-case. I'll send a v3 fixing the issue.

Sorry for the inconvenience.

Cheers,
Prabhakar
 .../devicetree/bindings/arm/renesas.yaml      |  18 +
 .../bindings/clock/renesas,rzg2l-cpg.yaml     |  80 ++
 arch/arm64/boot/dts/renesas/Makefile          |   2 +
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    | 119 +++
 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi  |  25 +
 .../boot/dts/renesas/r9a07g044l2-smarc.dts    |  21 +
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  |  27 +
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/Kconfig                   |   9 +
 drivers/clk/renesas/Makefile                  |   2 +
 drivers/clk/renesas/r9a07g044-cpg.c           | 372 +++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.c       | 979 ++++++++++++++++++
 drivers/clk/renesas/renesas-rzg2l-cpg.h       | 217 ++++
 drivers/soc/renesas/Kconfig                   |   5 +
 drivers/tty/serial/sh-sci.c                   |  12 +-
 drivers/tty/serial/sh-sci.h                   |   1 +
 include/dt-bindings/clock/r9a07g044-cpg.h     |  89 ++
 17 files changed, 1978 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
 create mode 100644 drivers/clk/renesas/r9a07g044-cpg.c
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.c
 create mode 100644 drivers/clk/renesas/renesas-rzg2l-cpg.h
 create mode 100644 include/dt-bindings/clock/r9a07g044-cpg.h

--
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help