[PATCH 14/24] ARM: at91: pm: add support for 2.5V LDO regulator control
From: Claudiu Beznea <hidden>
Date: 2021-03-31 11:01:13
Also in:
linux-arm-kernel, lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
Add support to disable/enable 2.5V LDO regulator when entering/exiting any ULP mode. Signed-off-by: Claudiu Beznea <redacted> --- arch/arm/mach-at91/pm.h | 1 + arch/arm/mach-at91/pm_suspend.S | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+)
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 666474088d55..53bdc9000e44 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h@@ -13,6 +13,7 @@ #include <soc/at91/at91sam9_ddrsdr.h> #include <soc/at91/at91sam9_sdramc.h> #include <soc/at91/sama7-ddr.h> +#include <soc/at91/sama7-sfrbu.h> #define AT91_MEMCTRL_MC 0 #define AT91_MEMCTRL_SDRAMC 1
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 8b0b8619ee8a..9c9e08fd8300 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S@@ -83,6 +83,29 @@ tmp3 .req r6 .endm +/** + * Set state for 2.5V low power regulator + * @ena: 0 - disable regulator + * 1 - enable regulator + * + * Side effects: overwrites r7, r8, r9, r10 + */ + .macro at91_2_5V_reg_set_low_power ena +#ifdef CONFIG_SOC_SAMA7 + ldr r7, .sfrbu + mov r8, #\ena + ldr r9, [r7, #AT91_SFRBU_25LDOCR] + orr r9, r9, #AT91_SFRBU_25LDOCR_LP + cmp r8, #1 + beq lp_done_\ena + bic r9, r9, #AT91_SFRBU_25LDOCR_LP +lp_done_\ena: + ldr r10, =AT91_SFRBU_25LDOCR_LDOANAKEY + orr r9, r9, r10 + str r9, [r7, #AT91_SFRBU_25LDOCR] +#endif + .endm + .text .arm
@@ -906,6 +929,9 @@ save_mck: at91_plla_disable + /* Enable low power mode for 2.5V regulator. */ + at91_2_5V_reg_set_low_power 1 + ldr tmp3, .pm_mode cmp tmp3, #AT91_PM_ULP1 beq ulp1_mode
@@ -918,6 +944,9 @@ ulp1_mode: b ulp_exit ulp_exit: + /* Disable low power mode for 2.5V regulator. */ + at91_2_5V_reg_set_low_power 0 + ldr pmc, .pmc_base at91_plla_enable
--
2.25.1